Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.
During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.
Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!
Standard for achieving effective control of external corrosion on buried or submerged metallic piping systems or other buried metallic structures. System design. Coatings. Cathodic protection criteria & installation. Control of interference currents. HISTORICAL DOCUMENT
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
NACE RP-01-1972 final publication as NACE RP0180-2001 was withdrawn by NACE International on 6/1/2010. This document was not replaced.
HISTORICAL DOCUMENT. Accepted practices for the cathodic protection of those metallic components of effluent clarifiers which are in contact with water.
Increasing the life expectancy of cooling water equipment through the application of chemical conditioning techniques prior to cooling water exposure. Two steps: (1) cleaning of metal surfaces. (2) Protective film on the metal surfaces. Historical Document 1995
Technologies for on-line monitoring of cooling water systems on a short-term basis (minutes to hours) to provide output to deal with changing conditions in real time. Corrosion rates & changes in heat transfer coefficients with precision and accuracy. Historical Document 1989
This NACE Standard describes a variety of devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems.
Devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems. Methods for collecting test data to determine fouling and corrosion rates. Historical Document 2002
钢制储水罐浸水内表面牺牲阳极阴极保护的推荐做法
DOWNLOADABLE HISTORICAL DOCUMENT. Chinese translation. Galvanic anode cathodic protection to the normally submerged steel surfaces inside water storage tanks used for municipal water supply and fire protection.
Design of oxygen stripping columns that employ natural gas for counter-current stripping. The procedures outlined have been tested in operating plants and proven accurate. Historical Document 1986
Guidelines for preparing for, recovering from, and repassivation after a low pH excursion... Procedures applicable to mild steel and need to be modified for other materials. Historical Document 1992
Guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. Historical Document 1995
HISTORICAL DOCUMENT. Selecting corrosion resistant metallic materials for supply, storage, pumping and injection of water encountered in oil field operations. Historical Document 1975
HISTORICAL DOCUMENT. Guide for selecting corrosion resistant materials for the supply, storage, pumping, and injection of water encountered in oilfield operations where external or subsea exposure to saltwater is not a consideration. Historical Document 1991