AMPP Store - NACE Standards

Available for download

00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12

Product Number: 51300-00615-SG

ISBN: 00615 2000 CP

Author: R.P. Negrey

$25.00

Conference Paper - This paper describes the requirements of the standard, additional inspection points, and several uses of the standard in the field where clear specification language was imperative to successful project completion. NACE 5/SSPC-SP 12 standard confined to water jetting - which makes use of ultra-high pressure water that is nonabrasive. Four levels of visible post-cleaning condition and three levels of non-visible condition are defined.

Available for download

1D196, Laboratory Test Methods for Evaluating Oilfield Corrosion Inhibitors

Product Number: 24192-SG

Publication Date: 1996

$179.00

HISTORICAL DOCUMENT. This Technical Committee Report establishes the pertinent parameters to be observed and/or controlled during laboratory and field evaluation of corrosion inhibitors for the purpose of establishing a common baseline for the comparison of the results from such evaluations.

Available for download

AMPP TR21522-2024, Corrosion Testing for Additive Manufacturing

Product Number: AMPP TR21522-2024

Publication Date: 2024

$109.00

This technical report presents the current state of knowledge and gap analyses on corrosion testing of metallic materials produced using additive manufacturing (AM) technologies in environments relevant to several industrial applications. The discussed materials were produced primarily via laser powder bed fusion (LPBF), directed energy deposition (DED), and specifically the wire arc additive manufacturing (WAAM) form of DED. Many variables may not be sufficiently detailed in the rapidly evolving state of the art at the time of publication for the assessment of the performance of AM products; some variables such as microstructure, post-build processing, surface condition, residual stress, physical defects, and selection of representative test specimens (size and/or geometry) for a finished product are addressed. This report contains approaches for corrosion and environmental cracking assessment of AM materials, including test details that are relevant to the AM processes for some specific cases. The technical report provides the foundation for the preparation of test standard(s) that apply to AM products.

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

ANSI/NACE MR0175/ISO 15156 Inquiries and Answers, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Inquiries and Answers

Product Number: 21312-SG

ISBN: MR0175/ISO 15156

Publication Date: 2015

$420.00

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys in oil and natural gas production and treatment plants with H2S-environments. With inquiries and responses embedded in the standard. Sold as a downloadable only.

Available for download

ANSI/NACE MR0175/ISO 15156-1 Technical Circular 1 (2017)

Product Number: 15156-1-SG2017

Publication Date: 2017

$0.00

International Standard ISO 15156-1:2015 Technical Circular 1. Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials.

Available for download

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 1 (2017)

Product Number: 15156-2-SG2017

Publication Date: 2017

$0.00

International Standard IS) 15156-2:2015 Technical Circular 1. Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production-Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons.

Available for download

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 2 (2018)

Product Number: 15156-2-SG2018

$0.00

International Standard ISO 15156-2:2015 Technical Circular 2-Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production, Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

Available for download

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 3 (2019)

Product Number: 15156-2-SG2019

Publication Date: 2019

$0.00

International Standard ISO 15156-2:2015 Technical Circular 3-Petroleum and natural gas industries-Materials for use in H2S-containing environments in oil and gas production, Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2009 (Chinese), Petroleum and Natural Gas Industries—Materials for Use in H2S-Containing Environments in Oil and Gas Production

Product Number: 21310-SG

ISBN: 1-57590-176-5

Publication Date: 2009

$310.00

CHINESE TRANSLATION. Selection and qualification of carbon and alloy steels for service in oil and natural gas production & treatment in H₂S-containing environments. Multiple downloadable files.

NACE Standards

Recently Revised

NACE Course Standards

00615 INSPECTION AND INTERPRETATION USING JOINT STANDARD NACE NO. 5/SSPC SP-12

1D196, Laboratory Test Methods for Evaluating Oilfield Corrosion Inhibitors

AMPP TR21522-2024, Corrosion Testing for Additive Manufacturing

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

ANSI/NACE MR0175/ISO 15156 Inquiries and Answers, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production—Inquiries and Answers

ANSI/NACE MR0175/ISO 15156-1 Technical Circular 1 (2017)

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 1 (2017)

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 2 (2018)

ANSI/NACE MR0175/ISO 15156-2 Technical Circular 3 (2019)

ANSI/NACE MR0175/ISO 15156-2009

ANSI/NACE MR0175/ISO 15156-2009 (Chinese), Petroleum and Natural Gas Industries—Materials for Use in H2S-Containing Environments in Oil and Gas Production

Association for Materials Protection and Performance