AMPP Store - Books

Available for download

AC Corrosion of Pipelines

Product Number: 37656-pdf

ISBN: 978-1-57590-464-1

Author: Y. Frank Cheng

$160.00

AC Corrosion of Pipelines covers the essential topics related to AC corrosion of pipelines, a problem affecting the safety and reliability of underground pipelines. In addition to the basic principles of AC interference induced by adjacent AC power lines and other sources, the book details the adverse effects of the interference on collocated pipelines, including corrosion and pitting corrosion, coating degradation, deviating of cathodic protection potentials, and the ineffectiveness of cathodic protection systems. Moreover, effective management measures to this problem are discussed. It also covers the DC interference and DC corrosion of the pipelines, as compared to the AC corrosion phenomenon. The book, the first of its kind, provides a complete and comprehensive understanding to the phenomenon from both the fundamentals and the author's research experiences.

The reader can learn and understand the basics associated with AC corrosion. Moreover, the book provides solutions and industry practice to mitigate, control, and manage AC corrosion of pipelines. The reader can thus learn the appropriate solutions to the problem. Finally, the book also includes DC corrosion of pipelines, in addition to AC corrosion, another essential problem to the buried pipelines with the increasing development of HVDC power lines. All of them contribute to improved knowledge base and recommended solutions for the actual problem threating the integrity and safety of pipelines.

Available for download

AC Corrosion of Pipelines-Chapter 2: Sources and Principles of AC Interfernce

Product Number: 37656-Ch02

$55.00

One of AMPP's best-selling titles, AC Corrosion of Pipelines, covers the essential topics related to AC corrosion of pipelines, a problem affecting the safety and reliability of underground pipelines.

Chapter 2, "Sources and Principles of AC Interference," is an introduction to the wide variety of sources generating AC interference and the main principles of the interference. The generation of AC interference under steady-state operation and the fault conditions are detailed. In particular, the modes and mechanisms of AC interference (i.e., capacitive coupling, resistive coupling, inductive coupling, etc.) are reviewed systematically for educational and practical purposes.

2021 AMPP, color, 13 pages with references, pdf

AC Corrosion of Pipelines--POD

Product Number: 37656-POD

ISBN: 978-1-57590-400-9

Author: Y. Frank Cheng

Publication Date: 2021

$170.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

AC Corrosion of Pipelines covers the essential topics related to AC corrosion of pipelines, a problem affecting the safety and reliability of underground pipelines.

In addition to the basic principles of AC interference induced by adjacent AC power lines and other sources, the book details the adverse effects of the interference on collocated pipelines, including corrosion and pitting corrosion, coating degradation, deviating of cathodic protection potentials, and the ineffectiveness of cathodic protection systems.

Moreover, effective management measures to this problem are discussed. It also covers the DC interference and DC corrosion of the pipelines, as compared to the AC corrosion phenomenon. The book, the first of its kind, provides a complete and comprehensive understanding to the phenomenon from both the fundamentals and the author's research experiences.

AMPP 2021, 284 pages, 6 x 9, Paperback

Available for download

Advances in Biomedical Corrosion

Product Number: 37688-PDF

ISBN: 978-1-57590-489-4

$145.00

Advances in Biomedical Corrosion: New Trends, Challenges, and Solutions encompasses just over 10 years of research into the interplay between corrosion and biomedical materials, based on technical papers by experts in the field.

While the range of biomedical materials is impressive--spanning metals, alloys, ceramics, and polymers--this title focuses on metals and alloys.

The book covers corrosion topics and technologies ranging nanomaterials for biomedical coatings to additive manufacutring for hip and knee replacements to the potentials of various alloys.

2023 AMPP e-book, 126 pages, color

Advances in Biomedical Corrosion

Product Number: 37688-POD

ISBN: 978-1-57590-488-7

$145.00

PRE-ORDER TODAY!!

Advances in Biomedical Corrosion: New Trends, Challenges, and Solutions encompasses just over 10 years of research into the interplay between corrosion and biomedical materials, based on technical papers by experts in the field.

While the range of biomedical materials is impressive--spanning metals, alloys, ceramics, and polymers--this title focuses on metals and alloys.

The book covers corrosion topics and technologies ranging nanomaterials for biomedical coatings to additive manufacutring for hip and knee replacements to the potentials of various alloys.

2023 AMPP book, 8.5 x 11, 126 pages, color

Available for download

Advances in Measurements of Corrosion Manifestation in Oil and Gas Production

Product Number: 37643-pdf

ISBN: 978-1-57590-440-5

Author: Wayne F. Frenier, FNACE

$205.00

This book provides a comprehensive review of the currently used critical measurements of the corrosion potential of the environments in the oil and gas, pipeline, power generation and refinery industries.

Thousands of measurements are conducted daily by chemists, engineer and technicians in labs and at field locations worldwide.

The book describes the equipment required and the methods used, as well as the scientific principles that are the basis for the measurements, to insure they are effectively performed. Decisions on the condition of field equipment as well as the use of corrosion control chemical (inhibitors) are based on properly conducting the measurements and interpreting the results.

Advances in Measurements of Corrosion Manifestations

Product Number: 37643-POD

ISBN: 978-1-57590-399-6

Author: Wayne F. Frenier, FNACE

$205.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

This book provides a comprehensive review of the currently used critical measurements of the corrosion potential of the environments in the oil and gas, pipeline, power generation and refinery industries.

Thousands of measurements are conducted daily by chemists, engineer and technicians in labs and at field locations worldwide.

The book describes the equipment required and the methods used, as well as the scientific principles that are the basis for the measurements, to insure they are effectively performed. Decisions on the condition of field equipment as well as the use of corrosion control chemical (inhibitors) are based on properly conducting the measurements and interpreting the results.

2021 AMPP, color, softbound, 480 pages

Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, 2nd edition (e-book)

Product Number: 37619-E

ISBN: 978-1-57590-338-5

Author: Ali Morshed

Publication Date: 2016

$130.00

For integrity engineers/managers, students, etc. Asset corrosion management discipline & its applications. Process. Products. Shortcomings. Cost savings. Real-case scenarios of oil and gas assets. 2016 NACE E-BOOK

Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition

Product Number: 37657-pdf

ISBN: 978-1-57590-465-8

Author: Ali Morshed

Publication Date: 2020

$150.00

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.

Available for download

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition (e-book)

Product Number: 37657-e

ISBN: 978-1-57590-410-8

Author: Ali Morshed

Publication Date: 2020

$150.00

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.

All NACE e-books are available as mobi files. The mobi is a common e-book format that can be opened by many e-book readers, though NACE suggests Kindle for optimized viewing. The Kindle app is available for free on Amazon for iOS (Apple devices), Android devices, MACs, and PCs at https://www.amazon.com/kindleapps

Once you download your e-books, they will automatically open in your Kindle app. To find your book in the future, open the app and click on library. This is where all your future NACE e-books (and all your other mobi e-books) will appear, in your personalized library.

NACE e-book, 2020

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition--POD

Product Number: 37657-POD

ISBN: 978-1-57590-407-8

Author: Ali Morshed

Publication Date: 2020

$155.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

In the eight years since the first edition of this book was published by NACE International, the demand for corrosion management expertise and services (i.e., training, auditing, consultancy, and field implementation) has been growing, both within the hydrocarbon and the non-hydrocarbon industries.

This latest edition is almost a total revamp of the previous one and greatly benefits from the author’s, Ali Morshed, continuous learning process through his frequent involvement with various oil and gas sectors and different industries as a corrosion management trainer, auditor, and consultant.

2020 NACE, softbound, B&W, 150 pages, 6 x 9 trim size.

Available for download

An Introduction to Corrosion Management in Industry (E-book)

Product Number: 37633-E

ISBN: 978-1-57590-364-4

Author: Ali Morshed

Publication Date: 2017

$130.00

Corrosion management for any non-hydrocarbon industrial sector where corrosion is a threat. For engineers involved in corrosion, maintenance, reliability, inspection, CP and coating. Owners, operators and managers. 2017 NACE

Books

eBooks

AC Corrosion of Pipelines

AC Corrosion of Pipelines-Chapter 2: Sources and Principles of AC Interfernce

AC Corrosion of Pipelines--POD

Advances in Biomedical Corrosion

Advances in Biomedical Corrosion

Advances in Measurements of Corrosion Manifestation in Oil and Gas Production

Advances in Measurements of Corrosion Manifestations

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, 2nd edition (e-book)

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition (e-book)

An Introduction to Asset Corrosion Management in the Oil and Gas Industry, Third Edition--POD

An Introduction to Corrosion Management in Industry (E-book)

Association for Materials Protection and Performance