Menu
Search
Filters
Close
Menu

RP0392-HD1995-SG Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems-HD1995

Picture for RP0392-Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems-HD1995
Available for download

Guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. Historical Document 1995

Product Number: 21055-HD1995
Author: NACE International
Publication Date: 1995
Industry: Water/Wastewater
$179.00
$179.00
$179.00

This standard recommended practice presents guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. The procedures presented in this standard in ro way preclude the use of other procedures but are presented as a consensus of experience gained over the years in a variety of plants. The provisions of this standard should be applied under the direction of qualified water-treatment personnel from water-treatment suppliers and/or consultants and plant personnel.

This standard was originally prepared in 1992 and subsequently revised in 1995 by Task Group T-7A-15, a component of Unit Committee T-7A on Cooling Water. The task group is composed of representatives from the refining, petrochemical, chemical, and water-treatment industries. This standard is published by NACE International under the auspices of Group Committee T-7 on Corrosion by Waters.

1.1 The discussions and procedures in this standard are applicable to low-carbon steel metallurgy. They need to be modified for systems that contain copper-based alloys, stainless steels, other metals, and other materials of construction. Low pH excursions are perhaps the most devastating of all cooling water system upsets. The inadvertent reduction in pH because of acid overfeed, process leaks, or airborne acid gases can result in a number of serious problems. Examples of these problems follow:…

This standard recommended practice presents guidelines for preplanning for, recovering from, and repassivation after a low pH excursion in open recirculating water systems, no matter what the cause. The procedures presented in this standard in ro way preclude the use of other procedures but are presented as a consensus of experience gained over the years in a variety of plants. The provisions of this standard should be applied under the direction of qualified water-treatment personnel from water-treatment suppliers and/or consultants and plant personnel.

This standard was originally prepared in 1992 and subsequently revised in 1995 by Task Group T-7A-15, a component of Unit Committee T-7A on Cooling Water. The task group is composed of representatives from the refining, petrochemical, chemical, and water-treatment industries. This standard is published by NACE International under the auspices of Group Committee T-7 on Corrosion by Waters.

1.1 The discussions and procedures in this standard are applicable to low-carbon steel metallurgy. They need to be modified for systems that contain copper-based alloys, stainless steels, other metals, and other materials of construction. Low pH excursions are perhaps the most devastating of all cooling water system upsets. The inadvertent reduction in pH because of acid overfeed, process leaks, or airborne acid gases can result in a number of serious problems. Examples of these problems follow:…

Product tags
Also Purchased
Picture for RP0375-Wax Coating Systems for Underground Piping Systems-HD1994
Available for download

RP0375-HD1994-SG Wax Coating Systems for Underground Piping Systems-HD1994

Product Number: 21013-HD1994
Author: NACE Internation
Publication Date: 1994
$179.00

Hot-applied wax and component wrappers, cold-applied wax and component wrappers, and wax-tape coating systems for the protection of underground pipe, fittings, and valves. Historical Document 1994

 
Picture for RP0390-Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures-HD2006
Available for download

RP0390-HD1998-SG Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures-HD2006

Product Number: 21044-HD1998
ISBN: 1-57590-059-9
Author: NACE International
Publication Date: 1998
$179.00

This standard presents corrosion control guidelines that are applicable to existing atmospherically exposed structures made of conventionally reinforced concrete. Historical Document 1998
Picture for RP0375-Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control-HD2006
Available for download

RP0375-HD2006-SG Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control-HD2006

Product Number: 21013-HD2006
ISBN: 1-57590-089-0
Publication Date: 2006
$179.00

Wax coating systems are designed to provide underground pipes with protection against corrosive environments. This standard recommended practice covers surface preparation, material requirements, application, and handling of hot- and cold-applied wax and component wrappers and wax-tape coating systems for the protection of underground pipe, fittings, and valves. This standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, and construction engineers and managers. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support