Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

RP-01-80-HD1980-SG, Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers-HD1980

Picture for Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers
Available for download

NACE RP-01-1972 final publication as NACE RP0180-2001 was withdrawn by NACE International on 6/1/2010. This document was not replaced.

 

HISTORICAL DOCUMENT. Accepted practices for the cathodic protection of those metallic components of effluent clarifiers which are in contact with water. 

Product Number: 53137-HD1980
Author: NACE International
Publication Date: 1980
Industries: Cathodic Protection , Water/Wastewater
$179.00
$179.00
$179.00

NACE RP-01-1972 final publication as NACE RP0180-2001 was withdrawn by NACE International on 6/1/2010. This document was not replaced.

HISTORICAL DOCUMENT.

The current emphasis by government authorities on environmental quality has prompted many pulp and paper mills to install treatment systems for plant effluent, including clarifiers to concentrate insoluble solids for further treatment. This Recommended Practice is intended to serve as a general guide to the establishment of an effective cathodic protection system for any effluent clarifier. It does not provide exact procedures for specific equipment as clarifiers exist in many sizes and variations of design.

This Recommended Practice was prepared by Task Group. T-SH-2 of Unit Committee T-SH on Corrosion Problems in the Pulp and Paper Industry and is issued by Group Committee T-S on Corrosion Problems in the Process Industries.

 

This Recommended Practice presents accepted practices for the cathodic protection of those metallic components of effluent clarifiers which are in contact with water.

The provisions of this Recommended Practice should be applied under the direction of a corrosion engineer. The term corrosion engineer, as used in this Recommended Practice, refers to a person, who, by reason of his knowledge of the physical sciences and the principles of engineering and mathematics, acquired by professional education and related practical experience, is qualified to engage in the practice of corrosion control.

 Historical Doument 1980

NACE RP-01-1972 final publication as NACE RP0180-2001 was withdrawn by NACE International on 6/1/2010. This document was not replaced.

HISTORICAL DOCUMENT.

The current emphasis by government authorities on environmental quality has prompted many pulp and paper mills to install treatment systems for plant effluent, including clarifiers to concentrate insoluble solids for further treatment. This Recommended Practice is intended to serve as a general guide to the establishment of an effective cathodic protection system for any effluent clarifier. It does not provide exact procedures for specific equipment as clarifiers exist in many sizes and variations of design.

This Recommended Practice was prepared by Task Group. T-SH-2 of Unit Committee T-SH on Corrosion Problems in the Pulp and Paper Industry and is issued by Group Committee T-S on Corrosion Problems in the Process Industries.

 

This Recommended Practice presents accepted practices for the cathodic protection of those metallic components of effluent clarifiers which are in contact with water.

The provisions of this Recommended Practice should be applied under the direction of a corrosion engineer. The term corrosion engineer, as used in this Recommended Practice, refers to a person, who, by reason of his knowledge of the physical sciences and the principles of engineering and mathematics, acquired by professional education and related practical experience, is qualified to engage in the practice of corrosion control.

 Historical Doument 1980

Product tags
Also Purchased
Picture for Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations
Available for download

RP0475-1975, Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations

Product Number: 53028-HD1975
Author: NACE
Publication Date: 1975
$179.00

HISTORICAL DOCUMENT. Selecting corrosion resistant metallic materials for supply, storage, pumping and injection of water encountered in oil field operations. Historical Document 1975
MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996
Available for download

MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996

Product Number: 21301-HD1995
Author: NACE International
Publication Date: 1995
$179.00

Material requirements for three types of polyolefin-based, cold-applied tapes used in coating pipelines - including pressure-sensitive and butyl-laminate tapes. Historical Document 1995
NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
Available for download

NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

Product Number: 21391-HD1995
Publication Date: 1995
$179.00

Factors that make electrical substation painting unique.  Worker safety and painting of radiators.  Providing owners, engineers, and maintenance personnel with sample specifications that they may modify to meet their specific requirements. Historical Document 1995
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support