Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

RP0189-HD2002-SG Online Monitoring of Cooling Waters-HD2002

Picture for RP0189-Online Monitoring of Cooling Waters-HD2002
Available for download

Devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems. Methods for collecting test data to determine fouling and corrosion rates. Historical Document 2002

Product Number: 21041-HD2002
ISBN: 1-57590-159-5
Author: NACE International
Publication Date: 2002
Industries: Water/Wastewater , Corrosion Monitoring and Control
$179.00
$179.00
$179.00

 

This NACE standard describes a variety of devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems. Methods, are presented for collecting test data to determine fouling and corrosion rates that can be used for, but are not limited to, (1) predicting the expected service life of heat-exchange equipment, (2) optimizing the cooling system operation, (3) detecting operating problems and upset conditions, (4) monitoring corrective actions taken when such conditions occur, (5) assisting in problem solving, and (6) evaluating alternate chemical treatment programs. This standard is intended for the use of operators of open recirculating cooling water systems and those organizations that supply treatment materials and consulting services to them.

This standard was originally prepared in 1989 by NACE Task Group T-3T-1, a component of Unit Committee T-3T on On-Line Monitoring Technology, and revised in 1995 by T-3T-4. It was revised in 2002 by NACE Task Group (TG) 241 on On-Line Monitoring of Cooling Waters and Cooling Water Test Units. TG 241 is administered by Specific Technology Group (STG) 11 on Water Treatment. This standard is issued by NACE International under the auspices of STG 11.

 

1.1 The purpose of this standard is to describe technologies applicable to the on-line monitoring of cooling water systems. The standard focuses on those technologies that provide data on a short-term basis (minutes to hours) and provide output in a form that may be used by the operator to deal with changing conditions in real time.

1.2 For the purpose of this standard, an on-line monitor for a cooling water system is defined as a device, or combination of devices, that measures corrosion rates and determines changes in heat transfer coefficients (fouling factors) by measuring pertinent parameters under steady-state conditions that simulate critical conditions in an operating heat exchanger in a reliable and objective manner and with acceptable precision and accuracy. (Nomenclature and abbreviations used in this standard are defined in Appendix A.) Historical Document 2002

 

This NACE standard describes a variety of devices used for on-line monitoring of fouling, corrosion, and other parameters in recirculating cooling tower water systems. Methods, are presented for collecting test data to determine fouling and corrosion rates that can be used for, but are not limited to, (1) predicting the expected service life of heat-exchange equipment, (2) optimizing the cooling system operation, (3) detecting operating problems and upset conditions, (4) monitoring corrective actions taken when such conditions occur, (5) assisting in problem solving, and (6) evaluating alternate chemical treatment programs. This standard is intended for the use of operators of open recirculating cooling water systems and those organizations that supply treatment materials and consulting services to them.

This standard was originally prepared in 1989 by NACE Task Group T-3T-1, a component of Unit Committee T-3T on On-Line Monitoring Technology, and revised in 1995 by T-3T-4. It was revised in 2002 by NACE Task Group (TG) 241 on On-Line Monitoring of Cooling Waters and Cooling Water Test Units. TG 241 is administered by Specific Technology Group (STG) 11 on Water Treatment. This standard is issued by NACE International under the auspices of STG 11.

 

1.1 The purpose of this standard is to describe technologies applicable to the on-line monitoring of cooling water systems. The standard focuses on those technologies that provide data on a short-term basis (minutes to hours) and provide output in a form that may be used by the operator to deal with changing conditions in real time.

1.2 For the purpose of this standard, an on-line monitor for a cooling water system is defined as a device, or combination of devices, that measures corrosion rates and determines changes in heat transfer coefficients (fouling factors) by measuring pertinent parameters under steady-state conditions that simulate critical conditions in an operating heat exchanger in a reliable and objective manner and with acceptable precision and accuracy. (Nomenclature and abbreviations used in this standard are defined in Appendix A.) Historical Document 2002

Product tags
Also Purchased
Picture for TM0183-2006 Historical Document-Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
Available for download

TM0183-HD2006-SG Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment-HD2006

Product Number: 21213-HD2006
ISBN: 1-57590-100-5
Author: NACE International
Publication Date: 2006
$179.00

Provides manufacturers, applicators, and users of internal pipe coatings with a method of comparing the performance of these coatings.  Historical Document 2006
Picture for TM0498-2014 Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture
Available for download

TM0498-HD2014-SG Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture-HD2014

Product Number: 21235-HD2014
Publication Date: 2014
$179.00

Historical Document. Two methods of evaluating relative carburization resistance of alloys used in ethylene cracking furnace tubes.  Standardized data that allows evaluation of tube supplier carburization data.
Picture for TM0399-2005 Standard Test Method for Phosphonate in Brine
Available for download

TM0399-HD2005-SG Standard Test Method for Phosphonate in Brine

Product Number: 21238-HD2005
ISBN: 1-57590-084-X
Author: NACE International
Publication Date: 2005
$179.00

 This standard is intended for use in analyzing low concentrations of phosphonate in brine containing interfering elements.  Historical Document 2005

 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support