AMPP Store - Products tagged with 'installation'

Available for download

51317--9494-Considerations for Repairing Live Piping Using Engineered Composite Repair Systems

Product Number: 51317--9494-SG

ISBN: 9494 2017 CP

Author: Matt Green

Publication Date: 2017

$20.00

Composite materials are being widely implemented for repair scenarios within refineries – domestically and around the world. This paper will discuss concerns, considerations, and needs typically encountered when using Engineered Composite Repair systems to repair live, operating piping systems in a plant environment.

Available for download

Development and Implementation of High-Pressure Large-Diameter RTR Pipe Systems for Oil and Gas Transmission Pipelines

Product Number: MECC23-20061-SG

Author: Alwin Fahrer; Lamont Inglehart

Publication Date: 2023

$20.00

To maintain production levels, oil fields in the Middle East increasingly require water injection to maintain pressure in hydrocarbon reservoirs. The injected water increases the water cut of the produced fluids, resulting in a very corrosive mixture for metallic piping. Therefore, nonmetallic pipe systems have become more widely accepted as alternative pipe materials for transporting produced fluids and injection water.

Available for download

Fallacy Concerning Life Expectancy of Polymer Linings and Repairing Them

Product Number: 41210-528-SG

Author: David Brysacz

Publication Date: 2010

$20.00

The intent of this presentation is to outline a procedure that if followed Polymer Linings will protect the customer’s assets for many years. The perception is that Polymer Linings only last for 6-8 years then they have to be totally removed. This presentation will show if proper procedures are followed Polymer Linings that have been in service for many tears do not necessarily have to be totally removed.

Available for download

Linear Anode for Pipeline Rehabilitation – Thirty Years Later

Product Number: MECC23-19993-SG

Author: Ted Huck

Publication Date: 2023

$20.00

There is a long and successful history of using linear anodes to cathodically protect older generation pipelines with aging coatings. The use of linear anodes to address poor cathodic protection distribution has proven to be easier and more cost effective than large scale recoating projects. While the use of linear anodes is common in the United States, there are many similar vintage pipelines in Europe, the Middle East and Asia which struggle with the same challenges and for whom this technology should be of great interest.

Available for download

Mesh Free Epoxy Passive Fire Protection - The Challenge: Advancements in Intumescent Epoxy Rapid Rise Passive Fire Protection Reduced Labor and Installation Costs

Product Number: 41214-867-SG

Author: Gordon Walker

Publication Date: 2014

$20.00

Since the inception of Epoxy Passive Fire Protection (EPFP), the industry has depended upon systems that require mesh reinforcement. The addition of this mesh adds at least $3.72 USD/sq. ft. to the applied systems. To avoid any risk of failure when exposed to fire reinforcement mesh must be correctly installed in accordance with the product’s certification and type approvals.

Available for download

NACE SP0200-2023, Steel-Cased Pipeline Practices

Product Number: NACE SP0200-2023

Publication Date: 2023

$109.00

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations

Product Number: NACE SP0775-2023

Publication Date: 2023

$109.00

This standard is presented for the use of metallic corrosion coupons in hydrocarbon production and processing facilities, including but not limited to drilling, production, and transportation operations on land, onshore and offshore. Hydrocarbon operations handle fluids including but not limited to oil, water, gas, condensate, and drilling fluids.

Available for download

Pre-Manufactured Architectural Fire Protection

Product Number: 41210-533-SG

Author: Bill Dempster

Publication Date: 2010

$20.00

A recent technology has been introduced where improved mechanical durability and aesthetically pleasing finish is achieved using pre-manufactured intumescent fire protection. This paper will detail how the pre-manufactured intumescent technology will provide an attractive alternative to spray application to achieve up to 2-hour rating with simple installation techniques that result in ultra smooth, no orange peel finish. This alternative process can be used on new construction, maintenance and building retrofits with little disruption on the job site.

Available for download

RP0298-HD1998-Sheet Rubber Linings for Abrasion and Corrosion Service-HD1998

Product Number: 21085-HD1998

ISBN: 1-57590-070-X

Author: NACE International

Publication Date: 1998

$179.00

Requirements for sheet rubber lining of various equipment for protection against corrosion and/or abrasion. This standard can be used in design, installation, inspection, testing, and storage of rubber-lined equipment. Historical Document 1998

Available for download

RP0572-HD1995-SG Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds-HD1995

Product Number: 21007-HD1995

Author: NACE International

Publication Date: 1995

$179.00

Methods for the design, installation, operation, and maintenance of deep groundbeds that discharge impressed current for cathodic protection of underground or submerged metallic structures. Historical Document 1995

Products tagged with 'installation'

Association for Materials Protection and Performance