Menu
Search
Filters
Close
Menu

NACE SP0200-2023, Steel-Cased Pipeline Practices

Picture for NACE SP0200-2023, Steel-Cased Pipeline Practices
Available for download

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Product Number: NACE SP0200-2023
Publication Date: 2023
Industries: Oil and Gas , Gas/Liquid Pipelines , Pipelines, Tanks, and Underground Systems
$109.00
$109.00
$109.00

Or

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Keywords: Pipelines, steel-cased, design, fabrication, installation, and maintenance

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Keywords: Pipelines, steel-cased, design, fabrication, installation, and maintenance

Product tags
Also Purchased
Picture for SP0286-2007
Available for download

SP0286-2007-SG (formerly RP0286), Electrical Isolation of Cathodically Protected Pipelines

Product Number: 21032-SG
ISBN: 1-57590-041-6
Publication Date: 2007
$109.00

Requirements to ensure adequate isolation of cathodically protected pipelines, especially those with high-quality dielectric coatings. 
Picture for SP0207-2007
Available for download

SP0207-2007, Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines

Product Number: 21121-SG
ISBN: 1-57590-211-7
Publication Date: 2007
$109.00

Presents procedures for performing close-interval DC pipe-to-electrolyte potential surveys on buried or submerged metallic pipelines.
Picture for SP0193-2016 (formerly RP0193)
Available for download

SP0193-2016-SG (formerly RP0193) External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

Product Number: 21061-SG
ISBN: 1-57590-014-9
Publication Date: 2016
$109.00

Application of CP to control external corrosion of carbon steel on-grade storage tank bottoms that are in contact with an electrolyte.  Both galvanic anode CP systems and impressed current CP systems. 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support