Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Picture for NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories
Available for download

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Product Number: NACE SP0291-2023
Publication Date: 2023
Industries: Oil and Gas Exploration , Oil and Gas , Gas/Liquid Pipelines , Oil and Gas Production , Pipelines, Tanks, and Underground Systems , Coatings and Linings , Coatings
$109.00
$109.00
$109.00

Or

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Keywords: internally-coated, protection of oilfield tubular goods, handling, installation, protection from damage, bolsters, tie-downs, transportation requirements.

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Keywords: internally-coated, protection of oilfield tubular goods, handling, installation, protection from damage, bolsters, tie-downs, transportation requirements.

Product tags
Also Purchased
Picture for NACE SP0191-2023, Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories
Available for download

NACE SP0191-2023, Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

Product Number: NACE SP0191-2023
Publication Date: 2023
$109.00

This standard addresses initial inspection of the tubular goods and accessories prior to coating, surface preparation, coatingapplication,coatinginspection,coupling/connectionmake-up,qualitycontrol,handling,storage,shipping,and marking.
Picture for NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations
Available for download

NACE SP0775-2023, Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Hydrocarbon Operations

Product Number: NACE SP0775-2023
Publication Date: 2023
$109.00

This standard is presented for the use of metallic corrosion coupons in hydrocarbon production and processing facilities, including but not limited to drilling, production, and transportation operations on land, onshore and offshore. Hydrocarbon operations handle fluids including but not limited to oil, water, gas, condensate, and drilling fluids.
Picture for NACE No. 1 SSPC SP-5 White Metal Blast Cleaning
Available for download

SSPC-SP 5/NACE No. 1-2006, White Metal Blast Cleaning

Product Number: 21065-SG
ISBN: 1-57590-107-2
Publication Date: 2006
$109.00

Requirements for "White Metal"  - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives.  (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support