Menu
Search
Filters
Close
Menu

Individual Conference Papers

View as
Sort by
Display per page
Picture for Comparison Results Between Multi-Functional Probe (Pit Detection + Electrical Resistance) and Weight-Loss Coupons
Available for download

Comparison Results Between Multi-Functional Probe (Pit Detection + Electrical Resistance) and Weight-Loss Coupons

Product Number: 51323-19245-SG
Author: Byeongho Ki, Cheolho Kang
Publication Date: 2023
$20.00

Pipeline internal corrosion is an important issue that threatens pipeline safety operations. Catastrophic failures of pipelines and equipment due to corrosion-related shortcomings can lead to fires, explosions, and the release of toxic materials into the environment. Regulator noted that more than 9000 failures occurred due to internal corrosion from 1990 to 2012.
Picture for Compatibility & Interactions Between Cathodic Protection and Vapor Phase Corrosion Inhibitors
Available for download

Compatibility & Interactions Between Cathodic Protection and Vapor Phase Corrosion Inhibitors

Product Number: 51317--9232-SG
ISBN: 9232 2017 CP
Author: Calvin Pynn
Publication Date: 2017
$20.00

Laboratory experiments to evaluate the mutual compatibility and interactions between a particular amine carboxylate based inhibitor and cathodic protection.
cathodic protection, electrical grounding, oil/gas stations, numerical simulation
Available for download

Compatibility Analysis of Regional CP System and Electrical Grounding System in Oil/Gas Stations

Product Number: 51317--9254-SG
ISBN: 9254 2017 CP
Author: Liang Dong
Publication Date: 2017
$20.00

Numerical simulation was used to calculate the potential and current distribution for cases with: (1) electrical isolation between grounding system and CP system; (2) different electrical grounding materials; (3) Optimization of anode beds (near/remote); (4) isolation of partial grounding electrodes.
Picture for Compatibility Evaluations of Sealing Materials with Aged Biofuels
Available for download

Compatibility Evaluations of Sealing Materials with Aged Biofuels

Product Number: 51317--8847-SG
ISBN: 8847 2017 CP
Author: Margit Weltschev
Publication Date: 2017
$20.00

The objective of this research was to determine the resistance of frequently used sealing materials such as EPDM, FKM, FVMQ, CR, CSM, IIR, NBR, PA, PUR and VMQ in aged biodiesel and heating oil B10 with 10 % biodiesel.
Picture for Compatibility of Dope Free Solution with Dense CO2 Streams
Available for download

Compatibility of Dope Free Solution with Dense CO2 Streams

Product Number: 51324-20930-SG
Author: Cecile Millet; Guillaume Néel; Florian Thébault; Pierre Mauger
Publication Date: 2024
$40.00
In the framework of the injection of anthropogenic CO2 for supporting energy transition, more and more wells will be used for injecting dense CO2 streams. Dope free solutions for premium OCTG connections to replace both storage and running thread compounds are beneficial for saving time (lower running time), for environmental considerations (no discharge of dope) as well as improving running performances. However, they have never been qualified in dense CO2 stream environments containing brines, while dense CO2 is known to be a good solvent toward polymers. A test protocol has been designed for that purpose, that combines an exposure to dense CO2 stream then to CO2 saturated brine environment. The objective is to duplicate a CO2 injection well life, from the start of the production, shut-in phases with formation water going up the tubing and restart (saturation of the brines with high CO2 pressure). Evaluation of the performance of a proprietary dope free solution was done by direct comparison with conventional running compounds. It has been observed a resistance of the dope free connection to dense CO2 at least as good as the dope connection on a super duplex material.
Picture for Compatibility of Polymers Exposed to Heating Oil Blends With 10 % and 20 % Biodiesel (FAME)
Available for download

Compatibility of Polymers Exposed to Heating Oil Blends With 10 % and 20 % Biodiesel (FAME)

Product Number: 51321-16222-SG
Author: Sina Pötzsch/Ralph Bäßler/Margit Weltschev
Publication Date: 2021
$20.00
Compatibility of Steels at 450°-650°C in Supercritical CO2 with O2 and H2O Additions
Available for download

Compatibility Of Steels At 450°-650°C In Supercritical CO2 With O2 And H2O Additions

Product Number: 51322-18018-SG
Author: B. A. Pint, M. J. Lance, R. Pillai, J. R. Keiser
Publication Date: 2022
$20.00

Using supercritical CO2 (sCO2) as a working fluid is being explored for a number of power generation technologies including fossil, nuclear, geothermal, concentrating solar power (CSP) and waste heat recovery1-7.  The various sCO2 cycles are attractive because of the low critical point (31°C/73.8 bar) and the reduced work of compression compared to an ideal gas.  While CO2 is sometimes described as inert, there is a long history of component degradation in subcritical and supercritical CO2 and a particular concern about internal carburization8-16. 
Picture for Compatibility Of Steels In Supercritical CO2 At 450°-650°C
Available for download

Compatibility Of Steels In Supercritical CO2 At 450°-650°C

Product Number: 51321-16724-SG
Author: B. A. Pint; R. Pillai; J. R. Keiser
Publication Date: 2021
$20.00
Picture for Compatibility Study of HDPE Internal Lining in Carbon Steels for Polymer Injection and Mixing Applications
Available for download

Compatibility Study of HDPE Internal Lining in Carbon Steels for Polymer Injection and Mixing Applications

Product Number: 51324-20607-SG
Author: Ahmed Al Yahyaai; Amjad Al Kharusi; Bushra Al Hudar; Hilal Al Shuhumi; Mohammed Al Maqbali
Publication Date: 2024
$40.00
Oil and gas production consider the nature of the reservoir and the complexity of the forming layers as a governing factor. One of the major challenges that are faced in the oil and gas upstream industry is the complexity of the reservoir in which the production requires enhanced recovery process. Polymer injection is one of the methods that is used widely to enhance the production and increase it accordingly. However, after the polymer preparation and mixing process, a system of flowlines and pipelines is utilized to carry over the final polymer product to the injection wells. This requires a comprehensive study of the material selection options for the pipelines and flowlines that are considered based on their performance, low maintenance requirement, and cost effectiveness. This paper focuses on the testing and qualification of high-density polyethylene (HDPE) internal lined carbon steel that is considered as one of the material selection options for polymer transfer. Further, material selection options are discussed along with the testing and qualification requirements. Compatibility of the high concentrated polymer liquid with HDPE material was tested to design HDPE liner inside CS pipes to transport and inject the polymer into the wells.
Compating Corrosion of Nuts & Bolts (Support Rods & Fasteners)
Available for download

Compating Corrosion of Nuts & Bolts (Support Rods & Fasteners)

Product Number: 51220-244-SG
Author: John Glass, Edwin Welles
Publication Date: 2020
$20.00

The presentation will discuss the challenges, overall objective and unique characteristics of the viscous-elastic semi-solid compound and bolt cap protection system. Testing, installation procedures and previous projects will be covered. One of the projects to be covered is the system used to protect the support rods of the recently constructed San Francisco Bay Bridge connecting Oakland to San Francisco. The bridge made the news prior to opening when it was determined that a portion of the support rods were experiencing fatigue and showing signs of premature failure.
Picture for Complete Project Coating Inspection Includes Inspecting Shop Applied Coatings
Available for download

Complete Project Coating Inspection Includes Inspecting Shop Applied Coatings

Product Number: 51323-19217-SG
Author: Murray Heywood
Publication Date: 2023
$20.00

Critical procedures at blasting and coating shops and steel fabricating shops, include surface preparation, application of primer coats, often shop applications include intermediate coat application, as well as occasionally including topcoat application. These phases of the process are absolutely critical to the long-term success of coating/lining projects. If the industry is serious about quality, specifiers must include language in the project specifications to include mandatory independent qualified coating inspection during shop coating applications.
Completion of Phase 1 of the Single Coat Research Program
Available for download

Completion of Phase 1 of the Single Coat Research Program

Product Number: 41207-347-SG
Author: Eric S. Kline, William D. Corbett
Publication Date: 2007
$20.00

Corrosion on steel bridges has long been recognized as a major concern. Over the years, technology has advanced from lead-based paints used for a century to three-coat systems. Recently, two-coat systems have been developed and are gaining acceptance. Research which is now underway to develop a one-coat system is described in this paper, along with the results of the Phase 1 testing which has been completed.
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support