AMPP Store - Test Method

Available for download

Equifinality: Specifying Performance

Product Number: 41216-963-SG

Author: Troy Fraebel, Tony Ippoliti

Publication Date: 2016

$20.00

The authors look toward the future of specifying coating projects starting with the traditional prescriptive, means-and-methods, coating formula-based specifications. The popular qualified product list (QPL) approach is presented along with its drawbacks. The design/build (DB) ideal and limitations of specifying only performance is presented.

Available for download

Formulating High Performance Coatings with Novel Adhesion Test Methods

Product Number: 41215-939-SG

Author: Yutao Yang

Publication Date: 2015

$20.00

Adhesion performance is required for every coating system. The adhesion between coatings and substrates is one of the most critical determining factors in the overall success of any coating material. Material design and formulation are key components of high-performance coatings and rely heavily on the accurate measurement and evaluation of adhesion in the coating systems.

Available for download

Formulators in the Field: The Effect of Over-Cure or Under-Cure of Polyclamine Cured Epoxy Linings

Product Number: 41216-993-SG

Author: Mike O’Donoghue, Vijay Datta, Travis Gafka

Publication Date: 2016

$20.00

Advanced technology high performance tank linings are often applied by plural spray equipment and occasionally one of the components could be off ratio. Worse still, some well-intentioned field personnel might add more curing agent to speed up the cure, or alter other properties, or may not utilize the entire curing agent portion in a single leg application. This paper investigates the effects of under-cure or over-cure on the performance of two high temperature tank linings by deliberately mis-mixing the two components.

Available for download

Importance Of Quality Control Of Wear Resistant Overlays In Oil Sands Production Operations.

Product Number: 51322-17838-SG

Author: Satya Kompally, Jeff Liu

Publication Date: 2022

$20.00

Canadian Oil Sands mining operations have been producing oil from sand ore from the early 1960s. Oil Sands mainly consists of high hardness quartz, silica, bitumen and water. Bitumen production processes include mining the sand, washing it with hot water, slurry transportation, tailing disposal and bitumen production. Abrasion, gouging wear, impact wear, erosion and erosion-corrosion are predominant degradation mechanisms in Oil Sand mining operations.

Available for download

Introductory Handbook for NACE MR0175/ISO 15156 (E-book)

Product Number: 37607-E

ISBN: 978-1-57590-320-0

Author: Derek Milliams

Publication Date: 2016

$59.00

ANSI/NACE MR0175/ISO 15156 standard in context of the corrosion science and the forms of cracking that led to its development. Usage. User Support. Documents. Laboratory tests to confirm cracking resistance of materials in O & G environments. 2016 NACE E-BOOK

Available for download

It’s All About Adhesion

Product Number: 51216-016-SG

Author: Guerman Vainblat, Timur Kolchinskiy

Publication Date: 2016

$20.00

A long-term project such as the current Brooklyn Bridge Rehabilitation Program, known as Brooklyn Bridge Contract 6, presents a great opportunity to collect vast amounts of data and records relating to the total coating replacement on a historic landmark. On any project, especially one of this scope, the project team has to deal with many obstacles, both expected and unexpected, and significant unknowns.

Available for download

Magnesium Special Issue - Corrosion Journal (digital) February 2021

Product Number: 32142-351-SG

ISBN: 1938-159X

Author: Geraint Williams / Joey Kish / T.W. Cain / C.F. Glover / J.S. Laird / N. Birbilis / J.R. Scully / R.L. Liu / E.A. McNally / S. Mahboubi / J.R. McDermid / H.N. McMurray / Michele Curioni / Meng Lyu / Andrea Cioncolini / Fabio Scenini / Christos Kousis / Patrick Keil / Ronald N. Clark / James Humpage / Robert Burrows / Hugh Godfrey / Mustufa Sagir / S.H. Salleh / Z.R. Zeng / M. Musameh / K. Venkatesan / S. Thomas / B. Zaghloul / C. Feiler / D. Mei / B.J.C. Luthringer-Feyerabend / S.V. Lamaka / M.L. Zheludkevich / Michael Höhlinger / Mark Bruns / Lukas Dahlem / Sannakaisa Virtanen / Jun-Lan Wang / Ming-Shi Song / Karla G. Contreras / Ivan Cole / Xiao-Bo Chen / Mohammad Umar Farooq Khan / Taban Larimian / T. Borkar / R.K. Gupta / M. Shahabi-Navid / M. Halvarsson / J.E. Svensson / A. Allanore / L.G. Johansson / M. Esmaily

Publication Date: 2021

$150.00

CORROSION journal's February 2021 special issue provides readers with the current trends in magensium corrosion research. This single download contains all articles from the issue and explores topics such as novel alloying additions, novel experimental methods and techniques, biomedical applications, atmospheric corrosion, and more.

Available for download

Measurement of Internal Coating Stresses of MIL-PRF-23377 Top Coated with MIL-PRF-8528

Product Number: 41216-954-SG

Author: Devin Clark, Richard C. Ferguson, James W. Rawlins

Publication Date: 2016

$20.00

Internal coatings stress (ICS) develops in coatings applied to a rigid substrates. During drying, volume changes due to solvent loss and/or cure induces stresses in the films. Differences in the thermal expansion coefficients of the coating and substrate also affect the ICS. ICS affects the interfacial adhesion and results in delamination once the stress exceeds the force of adhesion.

Available for download

Measurement of Internal Coating Stresses of MIL-PRF-23377 Top Coated with MIL-PRF-8528

Product Number: 41215-884-SG

Author: Devin Clark, Richard C. Ferguson, James W. Rawlins

Publication Date: 2015

$20.00

Internal coatings stress (ICS) develops in coatings applied to a rigid substrates. During drying, volume changes due to solvent loss and/or cure induces stresses in the films. Differences in the thermal expansion coefficients of the coating and substrate also affect the ICS. ICS affects the interfacial adhesion and results in delamination once the stress exceeds the force of adhesion.

Available for download

Measuring Chemical Composition Of Pipeline Steel Using Laser Induced Breakdown Spectroscopy (LIBS) Technology

Product Number: 51322-18193-SG

Author: Brian Wilson

Publication Date: 2022

$20.00

LIBS is a type of optical emission spectroscopy used to measure elemental concentrations in a material. LIBS operates by using a pulsed, focused laser that is fired at a sample with sufficient pulse energy as to create a plasma around the area struck. Bound atomic electrons are stripped from the atoms comprising the material. As the plasma cools, atoms recombine with electrons and in the process emit light in the UV, optical and IR regimes.

Available for download

Measuring Sodium Chloride, Salt and Soluble Contaminants

Product Number: 41216-964-SG

Author: Nico Frankhuizen

Publication Date: 2016

$20.00

This paper deals with the issue of surface contaminates analyses presently available on the market. The amount of variations of analyses and more important statements of the results cause great problems on the market. Described in the paper are not only the analyses possible, but also the interpretations belonging to them. However, salt measurements are used worldwide, its basics often appear to be a worldwide mystery. This paper should clarify the most common made mistakes.

Available for download

Method for Measuring Energy Savings on Highly Reflective Coatings

Product Number: 41215-886-SG

Author: Francisco Cortes, Pablo Aragón

Publication Date: 2015

$20.00

Real energy savings data for residential buildings is scarce and difficult to find. To address this concern, two identical houses were built in the outskirts of Monterrey, Mexico, where summer temperatures are usually very high (˜113°F). Energy consumptions using different waterproof coatings with different values of solar reflectance were evaluated.

Test Method

Association for Materials Protection and Performance