AMPP Store - Products tagged with 'cathodic protection'

Available for download

Overview Of Latest Advances In Understanding The Limited Ability Of Fusion Bonded Epoxy To Stop Corrosion Within Disbondments

Product Number: 51321-16808-SG

Author: Facundo Varela; Mauricio Latino; Yongjun Tan; Maria Forsyth

Publication Date: 2021

$20.00

Available for download

Painting Practices for Floating, Storage and Offloading Systems

Product Number: 41211-655-SG

Author: Michael B. Surkein, Robert H Rogers, Sophia Woodley

Publication Date: 2011

$20.00

Floating production storage offloading (FPSO) system hulls physically resemble ocean going transport vessels but operate more like fixed offshore structures. FPSOs normally are moored in deep water and are connected to unique riser systems. As these production systems are typically designed for long life, 20 to 30 years, corrosion control of the hull is extremely critical to help assure the required performance is obtained.

Available for download

Performance of Distributed Galvanic Anode Systems in Bridge Structures

Product Number: 51323-19214-SG

Author: Ben Ricker, Max Nie, Liao Haixue

Publication Date: 2023

$20.00

Corrosion of reinforcing steel is recognized as the major cause of the deterioration of reinforced concrete structures. Exposure to de-icing salts, seawater and chloride-containing set accelerators, plays a significant role in reinforcing steel corrosion (Figure 1). When the chloride content at the rebar level exceeds the threshold for initiation of corrosion, the passivation protective film on the rebar surface is destroyed and a corrosion cell can form either on the same piece of rebar with anodic and cathodic sites adjacent to each other, or a macro-cell between two different layers of reinforcement.

Available for download

Ph Measurement During Cathodic Protection And DC Interference

Product Number: 51321-16766-SG

Author: Mehdi Attarchi; Andrea Brenna; Marco Ormellese

Publication Date: 2021

$20.00

Pipeline Coatings

Product Number: 37616-POD

ISBN: 978-1-57590-335-4

Author: Y. Frank Cheng

$130.00

This is a print-on-demand (POD) book that will be produced just for you in 2-5 days after your order. It should arrive at your door in about one to two weeks. However, due to supply chain and logistic challenges currently affecting the industry, it may take longer. Allow three weeks for international orders.

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.

2017 NACE, 7" x 9", soft cover, 264 pages

Available for download

Pipeline Coatings

Product Number: 37616-pdf

ISBN: 978-1-57590-443-6

Author: Y. Frank Cheng

$130.00

Pipeline Coatings provides the reader with a history of generic pipeline coating types, technical information about testing, application, and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection (CP), CP shielding by coatings, and other related issues with the various coating systems related to CP.

Potential Theory Applied to Cathodic Protection Design, 2nd Edition

Product Number: 37694-POD

ISBN: 978-1-57590-495-5

Author: Rogelio de las Casas, Ronald Bianchetti

Publication Date: 2024

$155.00

NEW! The first edition of Potential Theory Applied to Cathodic Protection Design showcases the mathematical development of analytical equations for the design of cathodic protection (CP) systems for underground structures with anode groundbeds having various configurations. Equations include calculations for the resistance and voltage (potential) to assist the CP design engineer.

This second edition has several important changes including updates on integral and analytic solutions for horizontal anodes in the same trench, an approach that was insufficiently developed in the first edition.

Also new for the second edition is an index for enhanced reader experience.

Other updates include:

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•By means of the use of integral formulations, particularizes the use of the APM for any combination of underground anode systems.

2024 AMPP

Available for download

Premature Failure of API 650 Oil Storage Tank Bottom Plates Due to Soil Side Corrosion

Product Number: 51317--9025-SG

ISBN: 9025 2017 CP

Author: Naif Abri

Publication Date: 2017

$20.00

The above ground storage tanks in the refinery are experiencing bottom plate underside (soil) corrosion at a high rate of 1mm/year. Results: Failure of 4 tanks within a period of 9 years. Observations, details of the CP survey, tests, results and forward path taken up.

Available for download

Process Development for Mechanistic Corrosion Models: Building, Validating, and Leveraging for Robust Outcomes

Product Number: 51324-20871-SG

Author: Daniel Fingas; Scott McKelvey; Keith Parker

Publication Date: 2024

$40.00

Computer modelling and simulation holds the promise of improved outcomes and more efficient resource allocation. However, attaining these results requires careful consideration of model inputs, robust mechanistic or probabilistic characterizations, delineation of assumptions, validation of outputs versus available data, and the appropriate use of model results. Formalizing these steps is necessary to ensure that checks and balances are implemented transparently and can be audited if necessary. A process has been developed by which a mechanistic corrosion model can be built, validated, and used. The most critical aspect of the process is the validation, by which the model can be tested and shown to be accurate within an acceptable tolerance. Nevertheless, the clear definition of the overall process allows the model to be properly understood, including the necessary context of inputs, assumptions, limitations, and uncertainty. Thus, the process allows the model output to be relied upon for managing risk and maintaining system integrity by both operators and regulators.

Available for download

Protecting Steel Reinforcement by Coating Concrete with Thermal Spray Zinc

Product Number: 51324-20750-SG

Author: Bernardo Duran; Wade Campbell; Evan Stuart

Publication Date: 2024

$40.00

This paper, which serves to accompany a presentatiopn at the AMPP Annual Conference 2024, discusses the preperation and coating of coincrete with thermal spray zinc to protect the underlying steel reinforcement from corrosion on two bridges in regon. Descriptions cover the inspection, preperation, and repair of the concrete, and then follow up woth explanations on the application of the thermal zinc coating. Lastly, the presentation will summarize how the anode provided by the zinc coating protects the underlying steel reinforcement, and how it can be maintained and inspected over ites expected service life.

Available for download

Reassessment Of CP Effectiveness In A Multifaceted Electrolyte

Product Number: 51321-16863-SG

Author: Paul Murray, C.E.T.; Wolfgang Fieltsch, P.Eng.; Samay-Sanat Sahoo, P.Eng.; Stephen Gibson, P.Eng.; Lyndon Crone, E.I.T.

Publication Date: 2021

$20.00

Available for download

Reinforced Concrete Protection Using Thermal Sprayed Coatings

Product Number: 41211-609-SG

Author: Thomas D. Gibbons

Publication Date: 2011

$20.00

Reinforced concrete structures are subject to many types of deterioration. Many of these are visible; however, one that is not is the crevice corrosion that occurs internally at the reinforcing bars. To detect, mitigate and delay this type of insidious corrosion, a form of cathodic protection in the form of thermal sprayed coatings will be discussed. To implement this as a corrective action as well as a preventive action is the theme of this paper.

Products tagged with 'cathodic protection'

Association for Materials Protection and Performance