Search
Filters
Close

Online Seam Treatment of ERW pipes for proper material selection, process control and toughness improvement

Electric Resistance Welded (ERW) pipes X60M / X65M API 5L PSL2, with resistance to ductile fracture propagation as per API 5L PSL2 Annex G [1] are achieved not only by setting the proper welding parameters and the steel cleanliness, but also by a combination of metallurgical processes affecting the final weld line and HAZ microstructure. The steel chemistry is the starting point to minimize the presence of inclusions, central segregation and the toughness impairment due to harmful elements, S, P, etc. on the pipe body, with a given casting and rolling technology. During the welding process, the right parameters combination is needed to avoid cold weld, penetrators, and other weld imperfections. At the last stage, the Seam Heat Treatment (SHT) has to be adjusted in a way that the steel response to the thermal cycles leads to the compliance of mechanical requirements at the weld line and Heat Affected Zone (HAZ). This heat treatment is performed through electromagnetic induction using several coils, which allows it to have a rapid and localized heating of the HAZ into the austenitic region, and that is followed by air cooling. The objective is to refine the structure and to eliminate brittle constituents around the weld line. As the SHT strongly affects the weld performance, the optimum processing conditions such as austenitization temperature and cooling rate may not be the same for all steel chemistry, and has to be carefully selected. The capability to model the thermal cycle after the ERW process and the understanding of the metallurgical behavior of different steel chemistries and dimensional configuration becomes the main target of any ERW pipe manufacturer aiming supply reliable Line Pipes as per API 5L PSL2 Annex G. In this work, a numerical thermal model of the SHT is presented along with validation and simulation results. A summary of metallurgical thermal cycle simulations by means of a Gleeble® 3500, applied on different steels is also included.

Product Number: MPWT19-14408
Author: C. Cincunegui, M. Coloschi, P. Marino, E. Martínez, and M. Valdez
Publication Date: 2019
$0.00
$0.00
$0.00
Also Purchased
Picture for 08150 A Case Study: ERW Seam Weld Failure
Available for download
Picture for 02088 ASSESSMENT OF CORROSION IN LOW...
Available for download

02088 ASSESSMENT OF CORROSION IN LOW TOUGHNESS PIPE MATERIAL

Product Number: 51300-02088-SG
ISBN: 02088 2002 CP
Author: Julia Race and Stephen Peet
$20.00
Picture for 98036 QUALIFYING ERW TUBULAR PRODUCTS
Available for download

98036 QUALIFYING ERW TUBULAR PRODUCTS FOR SWEET PETROLEUM PRODUCTION ENVIRONMENTS

Product Number: 51300-98036-SG
ISBN: 98036 1998 CP
Author: R. E. Lewis, D. K. Barbin, J. T. Bulla, J. C. Hassell, H. J. Choi
$20.00