AMPP Store - Gas/Liquid Pipelines

Available for download

NACE SP0116-2022, Multiphase Flow Internal Corrosion Direct Assessment (MP-ICDA) Methodology for Pipelines

Product Number: NACE SP0116-2022

Publication Date: 2022

$109.00

This standard practice outlines a methodology to assess pipeline integrity because of the threat internal corrosion in on- shore and offshore pipelines and other piping systems that normally carry multiphase fluids (gas, water, and oil) termed multiphase flow internal corrosion direct assessment (MP-ICDA). Liquid separators (drips), compressing stations, vessels, and other equipment not related to pipelines are not included in this standard. This standard applies to pipelines, and piping systems both onshore and offshore, containing carbon dioxide (CO₂), hydrogen sulfide (H₂S), oxygen (O₂), and other corrosive species. Additionally, this standard applies to pipelines that continuously contain a liquid phase (water and condensate and/or oil and/or petroleum compounds), a possible solids content of various mineral scales, biofilms, or corrosion product compounds, and a continuous gas phase with fluid conditions that are not specifically covered by NACE SP0110 for wet gas internal corrosion direct assessment (WG-ICDA). Additionally, solids may be included as a phase by itself and may also be included in multiphase flow analysis of fluid streams

Available for download

NACE SP0185-2024, Extruded Two-Layer Polyolefin Resin Coating Systems with Adhesives for Underground or Submerged Pipe

Product Number: NACE SP0185-2024

Publication Date: 2024

$109.00

This standard practice provides the material characteristics, application methods, and handling, shipping, and installation procedures for polyolefin resin coating systems extruded over adhesives for the prevention of external corrosion of underground or submerged pipelines. This standard applies to both carbon steel (CS) pipe and ductile iron (DI) pipe when the application of extruded external coatings is described. This standard is intended for use by coating applicators, engineers, and pipeline owners as a guide to specifying application parameters.

Available for download

NACE SP0188-2006 (formerly RP0188), Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

Product Number: 21038-SG

Publication Date: 2006

$179.00

Provides a procedure for electrical detection of minute discontinuities in coating systems that are liquid-applied to conductive substrates other than pipelines.

Available for download

NACE SP0191-2023, Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

Product Number: NACE SP0191-2023

Publication Date: 2023

$109.00

This standard addresses initial inspection of the tubular goods and accessories prior to coating, surface preparation, coatingapplication,coatinginspection,coupling/connectionmake-up,qualitycontrol,handling,storage,shipping,and marking.

Available for download

NACE SP0200-2023, Steel-Cased Pipeline Practices

Product Number: NACE SP0200-2023

Publication Date: 2023

$109.00

The use of cased carrier pipe for pipelines crossing under highways and railroads has been common practice in the industry. The first cased crossings were made using large-diameter pipe. The carrier pipe was mechanically coupled and pushed through the casing, and the coupling or collars were in direct contact with it. When coatings came into general use, isolating spacers were made of hemp rope saturated with pipe-coating enamel. End seals consisting of either concrete or pipe-coating enamel were poured into each end of the casing. The current practice of installing cased carrier pipe has changed only slightly since the beginning of its use. External loading of the carrier pipe has now been eliminated by the installation of heavy-wall casing pipe, and isolating spacers are used to prevent electrical contact between the casing and the carrier pipe. End seals are used to keep electrolyte (e.g., mud, water) out of the annular space between the carrier pipe and casing.

Available for download

NACE SP0206-2006, Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

Product Number: NACE SP0206-2006

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. This standard practice formalizes a methodology termed internal corrosion direct assessment for pipelines carrying normally dry natural gas (DG-ICDA)^1,2,3 that can be used to help ensure pipeline integrity. The methodology is applicable to natural gas pipelines that normally carry dry gas, but may suffer from infrequent, short-term upsets of liquid water (or other electrolyte). This standard is intended for use by pipeline operators and others who manage pipeline integrity.

Available for download

NACE SP0291-2023, Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

Product Number: NACE SP0291-2023

Publication Date: 2023

$109.00

This standard practice covers the care, handling, transportation, and installation of internally plastic-coated (IPC) oilfield tubular goods and accessories (IPC material). Some internal plastic coatings are inherently brittle or may be incom- patible with various chemicals used in oil and gas production operations and therefore are susceptible to damage from poor handling procedures, well operations, and chemical attack. Coating damage (e.g., cracks, chips, and disbond- ment) reduces coating effectiveness and results in premature coating failure.

Available for download

NACE SP0304-2023, Design, Installation and Operation of Thermoplastic Liners for Oilfield Pipelines

Product Number: NACE SP0304-2023

Publication Date: 2023

$109.00

Thermoplastic liners are used to protect new and rehabilitated pipelines from internal corrosion in oilfield service. This Standard Practice is intended for use by liner designers and installers, owners of lined pipelines, liner materials suppliers, consultants, and construction and engineering firms engaged in the subject field. It is intended to provide guidance to designers, specifiers, installers, and operators of oilfield pipelines that use thermoplastic liners as a corrosion and/or abrasion mitigation method.

Available for download

NACE SP0394-2023, Application, Performance, and Quality Control of Plant-Applied Single-Layer Fusion-Bonded Epoxy External Pipe Coating

Product Number: NACE SP0394-2023

Publication Date: 2023

$109.00

Note: This document was originally published with an error in Section H4.4, Equation (H2), page 33, Section H4.3.3 has a note added, page 33, and Figure H2, Figure H3, Figure H4, and Figure H5, pages 35-38 were enlarged to improve accuracy. These identified errors are corrected. The Errata sheet is included.

This standard practice presents guidelines for establishing requirements to ensure proper application and performance of plant-applied single-layer fusion-bonded epoxy (FBE) coatings to the external surfaces of carbon steel pipe.

Available for download

NACE SP0399-2024, Plant-Applied External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

Product Number: NACE SP0399-2024

Publication Date: 2024

$109.00

This standard establishes minimum requirements to ensure proper application and performance of a plant-applied coal tar enamel system to the external surfaces of pipe. Included are methods for qualifying and controlling the quality of a coal tar enamel system, guidelines for its proper application, and inspection and repair techniques to ensure its long-term performance.

Available for download

NACE SP0402-2023, Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

Product Number: NACE SP0402-2023

Publication Date: 2023

$109.00

This AMPP standard practice provides the most current technology and industry practices for the use of field-applied, fusion-bonded epoxy (FBE) external pipe coating systems for girth weld joints. This standard is intended for use by corrosion control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to underground steel pipelines.

Available for download

NACE SP0602-2023, Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

Product Number: NACE SP0602-2023

Publication Date: 2023

$109.00

STABILIZATION NOTICE: This document has been declared “Stabilized” by AMPP Standards Committee (SC) 03 and will no longer be subjected to periodic reviews for currency.

This AMPP standard practice provides the most current technology and industry practices for the use of field-applied coal tar enamel external pipe coating systems. This standard is intended for use by corrosion-control personnel, design engineers, project managers, purchasing personnel, and construction engineers and managers. It is applicable to underground steel pipelines in the oil and gas gathering, distribution, and transmission industries.

Gas/Liquid Pipelines

Association for Materials Protection and Performance