AMPP Store - Gas/Liquid Pipelines

Available for download

NACE TM0102-2023, Measurement of Protective Coating Electrical Conductance on Underground Pipelines

Product Number: NACE TM0102-2023

Publication Date: 2023

$109.00

This Association for Materials Protection and Performance (AMPP) standard test method presents guidelines and procedures for use primarily by corrosion control personnel in the pipeline industry to determine the general condition of a pipeline coating. These techniques are used to measure the coating conductance (inverse of coating resistance) on sections of underground pipelines. This test method applies only to pipe coated with dielectric coatings.

When surveying a coated pipeline system, it may be necessary to determine the conductance of the coating. The conductance of a coating can vary considerably along the pipeline. Variations may be caused by changes in average soil resistivity, terrain, and quality of construction. To obtain data for coating conductance calculations, interrupted structure-to-electrolyte potentials and line current readings are taken at pre-selected intervals. It should be noted that the average soil resistivity has a direct effect on the coating conductance measurement. Because soil resistivity can affect the coating conductance, it must be known when evaluating a section of a pipeline coating.

Available for download

NACE TM0177-2005, Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments

Product Number: NACE TM0177-2005

Publication Date: 2005

$179.00

HISTORICAL DOCUMENT.

This standard addresses the testing of metals for resistance to cracking failure under the combined action of tensile stress and corrosion in aqueous environments containing hydrogen sulfide (H2S). This phenomenon is generally termed sulfide stress cracking (SSC) when operating at room temperature and stress corrosion cracking (SCC) when operating at higher temperatures. In recognition of the variation with temperature and with different materials this phenomenon is herein called environmental cracking (EC). For the purposes of this standard, EC includes only SSC, SCC, and hydrogen stress cracking (HSC).

Available for download

NACE TM0186-2016, Holiday Detection of Internal Tubular Coatings of 355 to 760 μm (14 to 30 mils) Dry-Film Thickness

Product Number: 21218-SG

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Nondestructive test method for the detection of holidays in polymeric coatings of 250 to 760 µm (10 to 30 mils) in metallic tubular goods used in the oil and gas industry. Apparatus, Procedure, Reporting.

Available for download

NACE TM0186-2023, Holiday Detection of Internal Tubular Coatings of 330 to 760 µm (13 to 30 mils) Dry Film Thickness

Product Number: NACE TM0186-2023

Publication Date: 2023

$109.00

This standard covers internal tubular polymeric coatings on a steel pipe/piping substrate. The standard defines and provides a procedure for the determination of the presence of holidays in a thick-film coating. This test method is based on the current technology and experience of the petroleum production industry This standard is intended for end users, manufacturers, applicators, corrosion engineers, and quality inspectors of internally coated metallic tubular goods.

Available for download

NACE TM0384-2016, Detection of Internal Tubular Coatings of Less Than 250 μm (10 mils) Dry-Film Thickness

Product Number: 21216-SG

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT. Test method for evaluating the application of polymeric coatings of less than 250 µm (10 mils) dry-film thickness to the internal surfaces of metallic tubular goods used in the oil and gas industry.

Available for download

NACE TM0384-2023, Holiday Detection of Internal Tubular Coatings of Less Than 330 µm (13 mils) Dry Film Thickness

Product Number: NACE TM0384-2023

Publication Date: 2023

$109.00

This nondestructive test method describes a procedure to detect discontinuities (“holidays”) in thin-film polymeric coatings of less than 330 µm (13 mils) dry film thickness (DFT) applied to the internal surfaces of metallic tubular goods used in the oil and gas industry. The apparatus and the recommended procedure for performing the test are described, as are methods of reporting the test data.

A separate test method, NACE TM0186, addresses holiday detection of internal tubular good coatings of 330 to 760 µm (13 to 30 mils) dry-film thickness.

Available for download

NACE TM21420-2023, Test Method for Measurement of Peel Strength of Multilayer Polyolefin Coating Systems

Product Number: NACE TM21420-2023

Publication Date: 2023

$109.00

This test method describes a reliable methodology for determining the peel strength of polyolefin-based multilayer pipeline coating systems, generally for coating thickness less than 12 mm (0.47 in). This standard provides a method to measure the peel strength of polyolefin-based multilayer coating systems, such as 2-layer polyethylene coating (2LPE), 3-layer polyethylene (3LPE), 3-layer polypropylene (3LPP), and heat shrink sleeve (HSS) field joint coating. It provides essential information on the quality of the applied coating. This is particularly important for field-applied coatings, of which the application process is significantly impacted by the environmental conditions and the skill set of the field applicators.

Available for download

NACE TM21431-2020, Test Methods to Evaluate Thermal Properties and Performance of Insulative Coatings

Product Number: 21431-2020

Publication Date: 2020

$179.00

HISTORICAL DOCUMENT. The purpose of this NACE International standard test method is to specify test methods and test conditions used to evaluate thermal properties, insulation values, and performance/integrity before and after thermal aging of insulative coatings. Testing for corrosion resistance is not included in this test method.

Available for download

Peabody's Control of Pipeline Corrosion, 3rd Edition (E-Book)

Product Number: 37617-E

ISBN: 978-1-57590-336-1

Author: by A.W. Peabody, edited by Ronald Bianchetti

Publication Date: 2018

$150.00

NEW EDITION!! For nearly 50 years Control of Pipeline Corrosion, written by A.W. Peabody, has been the most trusted resource in the field of pipeline corrosion. Now completely revised and updated, the third edition of this classic reference continues the tradition of excellence by providing the most thorough and authoritative coverage of the prevention and control of pipeline corrosion, and now includes a chapter on AC interference.

Peabody's Control of Pipeline Corrosion, Third Edition, edited by Ronald Bianchetti, blends traditional corrosion engineering practices with modern technologies to make this the single source for corrosion control. Chapters have updated information and graphics to expand on the user-friendly nature of the original book.

2018 NACE E-Book.

Available for download

Pipeline Coatings (E-book)

Product Number: 37616-E

ISBN: 978-1-57590-335-4

Author: Y. Frank Cheng & Richard Norsworthy

Publication Date: 2017

$130.00

All NACE e-books are available as mobi files. The mobi is a common e-book format that can be opened by many e-book readers, though NACE suggests Kindle for optimized viewing. The Kindle app is available for free on Amazon for iOS (Apple devices), Android devices, MACs, and PCs at https://www.amazon.com/kindleapps

Once you download your e-books, they will automatically open in your Kindle app. To find your book in the future, open the app and click on library. This is where all your future NACE e-books (and all your other mobi e-books) will appear, in your personalized library.

This book provides the reader with a history of generic pipeline coating types, technical information about testing, application and use. There is very practical information about selection and evaluation methods for each type of coating system to help those who design pipeline systems. There is also discussion of how coatings work with cathodic protection, cathodic protection shielding by coatings and other related issues with the various coating systems related to CP.

2017 NACE

Potential Theory Applied to Cathodic Protection Design, 2nd Edition

Product Number: 37694-POD

ISBN: 978-1-57590-495-5

Author: Rogelio de las Casas, Ronald Bianchetti

Publication Date: 2024

$155.00

NEW! The first edition of Potential Theory Applied to Cathodic Protection Design showcases the mathematical development of analytical equations for the design of cathodic protection (CP) systems for underground structures with anode groundbeds having various configurations. Equations include calculations for the resistance and voltage (potential) to assist the CP design engineer.

This second edition has several important changes including updates on integral and analytic solutions for horizontal anodes in the same trench, an approach that was insufficiently developed in the first edition.

Also new for the second edition is an index for enhanced reader experience.

Other updates include:

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•Generalization of groundbed resistance combining the equation for anodes with different length and depth, with the equation for different distance between anodes.

•Calculation of anode’s current in a groundbed, based on the crowding factor.

•By means of the use of integral formulations, particularizes the use of the APM for any combination of underground anode systems.

2024 AMPP

Available for download

Role of Crack Tip Strain Rate on the Fatigue and Fracture Behavior of Line Pipe Steel in Sour Environments

Product Number: 51317--9203-SG

ISBN: 9203 2017 CP

Author: Thodla Ramgopal

Publication Date: 2017

$20.00

Fatigue and fracture of line pipe steels in a sour inhibited environment is presented. Fatigue crack growth rate (FCGR) was investigated as a function of frequency at several different K values at a pH of 3.5 and 0.21psia (0.00144MPa) H2S.