Menu
Search
Filters
Close
Menu

51316-7102-In-Situ Monitoring Of Bacteria Under High Pressure And Temperature Conditions

Downloadable, Microbial induced corrosion, Surface Enhanced Raman, In-Situ Characterization, SRB
Available for download

A preliminary evaluation of the use of Surface Enhanced Raman spectroscopy (SERS) to monitor Biofilm. SERS was used to monitor the growth of Desulfovibrio vulgaris and Desulfovibrio desulfuricans on UNS S30400 stainless steel samples in-situ from pre-inoculation through the initial hours of growth at 37 °C and atmospheric pressure.

Product Number: 51316-7102-SG
ISBN: 7102 2016 CP
Author: Todd Mintz
Publication Date: 2016
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

Microbial induced corrosion (MIC) is a phenomenon where by microorganisms presence and activities result in the degradation of a material or component. In particular for the oil and gas industry various bacteria such as sulfate reducing bacteria (SRB) acid producing bacteria general aerobic bacteria and general anaerobic bacteria have been linked to accelerated corrosion. While MIC may be attributed to a single group of organisms MIC is more severe when the population in a biofilm contains many types of microorganisms. There has been a lot of research focused on identifying the key microorganisms that control corrosion in oil and gas pipelines. Much of this work includes bioassays of the microorganism followed by metagenomics. While this may be successful at identifying the microorganisms present in the biofilm it does not provide in-situ data on how the bacteria may be contributing to the pipeline corrosion. In order to accomplish this an in-situ technique needs to be developed. The work described in the paper examines how Surface Enhanced Raman spectroscopy (SERS) was used to evaluate two different strains of SRBs in-situ. SERS was used to monitor the growth ofD. vulgaris and D. desulfuricans on stainless steel samples in-situ from pre-inoculation through the initial hours of growth at 37 °C and atmospheric pressure. The results showed distinct spectra that could be attributed to the growth of the SRB on the surface of the stainless steel samples. Furthermore the SERS results showed that there were differences between the spectral patterns of the two SRBs that could be used to differentiate the two SRBs. Finally testing was conducted in a gas flow loop at a pressure of 1000psi and temperature of 37°C to mimic conditions that might be experienced in a gas pipeline.D. vulgaris was grown in this gas flow loop and in-situ SERS measurements were made on the surface of a stainless steel sample contained in the flow loop. The high pressure and temperature SERS results appeared to indicate growth ofD.vulgaris on the exposed stainless steel sample.

Keywords: Downloadable, Microbial induced corrosion, Surface Enhanced Raman, In-Situ Characterization, SRB

Microbial induced corrosion (MIC) is a phenomenon where by microorganisms presence and activities result in the degradation of a material or component. In particular for the oil and gas industry various bacteria such as sulfate reducing bacteria (SRB) acid producing bacteria general aerobic bacteria and general anaerobic bacteria have been linked to accelerated corrosion. While MIC may be attributed to a single group of organisms MIC is more severe when the population in a biofilm contains many types of microorganisms. There has been a lot of research focused on identifying the key microorganisms that control corrosion in oil and gas pipelines. Much of this work includes bioassays of the microorganism followed by metagenomics. While this may be successful at identifying the microorganisms present in the biofilm it does not provide in-situ data on how the bacteria may be contributing to the pipeline corrosion. In order to accomplish this an in-situ technique needs to be developed. The work described in the paper examines how Surface Enhanced Raman spectroscopy (SERS) was used to evaluate two different strains of SRBs in-situ. SERS was used to monitor the growth ofD. vulgaris and D. desulfuricans on stainless steel samples in-situ from pre-inoculation through the initial hours of growth at 37 °C and atmospheric pressure. The results showed distinct spectra that could be attributed to the growth of the SRB on the surface of the stainless steel samples. Furthermore the SERS results showed that there were differences between the spectral patterns of the two SRBs that could be used to differentiate the two SRBs. Finally testing was conducted in a gas flow loop at a pressure of 1000psi and temperature of 37°C to mimic conditions that might be experienced in a gas pipeline.D. vulgaris was grown in this gas flow loop and in-situ SERS measurements were made on the surface of a stainless steel sample contained in the flow loop. The high pressure and temperature SERS results appeared to indicate growth ofD.vulgaris on the exposed stainless steel sample.

Keywords: Downloadable, Microbial induced corrosion, Surface Enhanced Raman, In-Situ Characterization, SRB

Product tags
Also Purchased
Picture for Marine Crevice Corrosion Of Stainless Steel Alloys Under Biofilmed And Sterile Conditions
Available for download

51316-7109-Marine Crevice Corrosion Of Stainless Steel Alloys Under Biofilmed And Sterile Conditions

Product Number: 51316-7109-SG
ISBN: 7109 2016 CP
Author: James Stott
Publication Date: 2016
$20.00

As part of a project to develop a database of seawater corrosion resistance including resistance to microbiologically-influenced corrosion (MIC) seawater, MIC exposure tests of five stainless steel alloys were undertaken for three and six month durations.
Picture for Relation Between Localized Corrosion And SCC In Nickel Based Alloys In HP/HT Oil And Gas Environment
Available for download

51316-7113-Relation Between Localized Corrosion And SCC In Nickel Based Alloys In HP/HT Oil And Gas Environments

Product Number: 51316-7113-SG
ISBN: 7113 2016 CP
Author: Thodla Ramgopal
Publication Date: 2016
$20.00

Fatigue and fracture performance of UNS N07718 (718) and UNS N07716 (625+) in sour environments over a range of temperatures (300 to 400°F) and chloride concentrations (0.15wt% to 25wt% NaCl). Rising displacement fracture toughness test performed in a range of environments.

 
Picture for Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Co
Available for download

51316-7117-Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Coated Pressure Safety Valve from an Eocene Sub Centre at Partitioned Zone (Kingdom of Saudi Arabia and Kuwait). – A Case Study

Product Number: 51316-7117-SG
ISBN: 7117 2016 CP
Author: Hamed Al-Shammary
Publication Date: 2016
$20.00

The case study demonstrates different approaches towards what went wrong and why on pressure safety valve susceptible to MIC growth. The Eocene Sub Centre-1 Shipping Pump discharge header connected pressure safety valve (01PSV172) reported leaking from the body and POD requested Asset Integrity Division to conduct Root Cause Analysis with recommendation.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support