Menu
Search
Filters
Close
Menu

Save 20% on select titles with code HIDDEN24 - Shop The Sale Now

51316-7117-Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Coated Pressure Safety Valve from an Eocene Sub Centre at Partitioned Zone (Kingdom of Saudi Arabia and Kuwait). – A Case Study

  • /
  • /
  • /
  • 51316-7117-Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Coated Pressure Safety Valve from an Eocene Sub Centre at Partitioned Zone (Kingdom of Saudi Arabia and Kuwait). – A Case Study
Picture for Biocide Injection to Eliminate the Risk of Bacterial Growth and Corrosion Failure in Non Internal Co
Available for download

The case study demonstrates different approaches towards what went wrong and why on pressure safety valve susceptible to MIC growth. The Eocene Sub Centre-1 Shipping Pump discharge header connected pressure safety valve (01PSV172) reported leaking from the body and POD requested Asset Integrity Division to conduct Root Cause Analysis with recommendation.

Product Number: 51316-7117-SG
ISBN: 7117 2016 CP
Author: Hamed Al-Shammary
Publication Date: 2016
Industry: Science of Corrosion
$0.00
$20.00
$20.00

Consider the existence of mixed-mode failure in which one mechanism or mode of failure is predominant by microbiologically influenced corrosion (MIC) failures which cause leaks in process equipment and pipelines particularly in the oil and gas industry and prevention of Microbiological corrosion will avoid costly replacement of equipments and thus avoid leaks of gases and discharges of oil. Such failures can have catastrophic results in fire loss of life and reduction in production with consequential impact upon the economics of the operation. The case study demonstrates different approaches towards what went wrong and why on pressure safety valve susceptible to MIC growth. The Eocene Sub Centre-1 Shipping Pump discharge header connected pressure safety valve (01PSV172) reported leaking from the body and POD requested Asset Integrity Division to conduct Root Cause Analysis with recommendation. The PSV was found leaking through a perforation on the valve body caused by an internal corrosion found in discharge side of PSV and sample collected from internal valve perforated area to know the corrosion related to MIC In addition to that water sample collected to analyse physical chemical properties and as well as microorganisms. All the testing methods contributed to MIC Growth.

Key words: conference papers, 2016 conference papers, downloadable, Root Cause Analysis (RCA), Microbiologically Influenced Corrosion (MIC), Corrosion Morphology, Sulfate Reducing Bacteria (SRB), General Aerobic Bacteria (GAB), Coating

Consider the existence of mixed-mode failure in which one mechanism or mode of failure is predominant by microbiologically influenced corrosion (MIC) failures which cause leaks in process equipment and pipelines particularly in the oil and gas industry and prevention of Microbiological corrosion will avoid costly replacement of equipments and thus avoid leaks of gases and discharges of oil. Such failures can have catastrophic results in fire loss of life and reduction in production with consequential impact upon the economics of the operation. The case study demonstrates different approaches towards what went wrong and why on pressure safety valve susceptible to MIC growth. The Eocene Sub Centre-1 Shipping Pump discharge header connected pressure safety valve (01PSV172) reported leaking from the body and POD requested Asset Integrity Division to conduct Root Cause Analysis with recommendation. The PSV was found leaking through a perforation on the valve body caused by an internal corrosion found in discharge side of PSV and sample collected from internal valve perforated area to know the corrosion related to MIC In addition to that water sample collected to analyse physical chemical properties and as well as microorganisms. All the testing methods contributed to MIC Growth.

Key words: conference papers, 2016 conference papers, downloadable, Root Cause Analysis (RCA), Microbiologically Influenced Corrosion (MIC), Corrosion Morphology, Sulfate Reducing Bacteria (SRB), General Aerobic Bacteria (GAB), Coating

Product tags
Also Purchased
Picture for Marine Crevice Corrosion Of Stainless Steel Alloys Under Biofilmed And Sterile Conditions
Available for download

51316-7109-Marine Crevice Corrosion Of Stainless Steel Alloys Under Biofilmed And Sterile Conditions

Product Number: 51316-7109-SG
ISBN: 7109 2016 CP
Author: James Stott
Publication Date: 2016
$20.00

As part of a project to develop a database of seawater corrosion resistance including resistance to microbiologically-influenced corrosion (MIC) seawater, MIC exposure tests of five stainless steel alloys were undertaken for three and six month durations.
Picture for Risk Assessment And Downhole Chemical Treatment Program For Production Wells Within The Wafra Field
Available for download

51316-7115-Risk Assessment And Downhole Chemical Treatment Program For Production Wells Within The Wafra Field

Product Number: 51316-7115-SG
ISBN: 7115 2016 CP
Author: Tariq Kamshad
Publication Date: 2016
$20.00

Chemical treatment of reservoir fluids within the wellbore is essential for the control of associated corrosion and scale deposition. The Wafra Risk Assessment was developed with the Likelihood of Failure (LoF) based on historical corrosion well workover failures and the Consequence of Failure (CoF) directly tied to oil daily oil production.
Downloadable, Microbial induced corrosion, Surface Enhanced Raman, In-Situ Characterization, SRB
Available for download

51316-7102-In-Situ Monitoring Of Bacteria Under High Pressure And Temperature Conditions

Product Number: 51316-7102-SG
ISBN: 7102 2016 CP
Author: Todd Mintz
Publication Date: 2016
$20.00

A preliminary evaluation of the use of Surface Enhanced Raman spectroscopy (SERS) to monitor Biofilm. SERS was used to monitor the growth of Desulfovibrio vulgaris and Desulfovibrio desulfuricans on UNS S30400 stainless steel samples in-situ from pre-inoculation through the initial hours of growth at 37 °C and atmospheric pressure.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support