AMPP Store - Corrosion Monitoring and Control

Available for download

TM0274-HD1995-SG Dynamic Corrosion Testing of Metals in High-Temperature Water-HD1995

Product Number: 21207-HD1995

Author: NACE International

Publication Date: 1995

$179.00

A pilot plant method for determining the extent and rate of corrosion of metals in circulating high-temperature water at temperatures > 100°C (212°F) but < ~360°C (680°F). Historical Document 1995

Available for download

TM-02-84-HD1984-SG, Evaluation of Pipeline Steels for Resistance to Stepwise Cracking-HD1984

Product Number: TM-02-84-HD1984

Author: NACE

Publication Date: 1984

$179.00

Evaluating the resistance of pipeline steels to stepwise cracking induced by hydrogen absorption from aqueous sulfide corrosion. Applies to line pipe with wall thicknesses of 5 to 30 mm. Historical Document 1984

Available for download

TM0284-HD2003-SG Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking-HD2003

Product Number: 21215-HD2003

ISBN: 1-57590-163-3

Author: NACE International

Publication Date: 2003

$179.00

This standard establishes a test method for evaluating the resistance of pipeline and pressure vessel plate steels to HIC caused by hydrogen absorption from aqueous sulfide corrosion. Historical Document 2003

Available for download

TM0286-1988, Cooling Water Test Units Incorporating Heat Transfer Surfaces

Product Number: 53058-HD1988

Author: NACE International

Publication Date: 1988

$179.00

Three types of test heat exchangers...valuable in many operating cooling towers: (1) Multiple tube steam-heated exchanger (2) Two tube steam-heated exchanger (3) Single tube electrically heated visual monitor Historical Document 1988

Available for download

TM0398-HD1998-SG Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Above 100°C (212°F)-HD1998

Product Number: 21234-HD1998

ISBN: 1-57590-062-9

Author: NACE International

Publication Date: 1998

$179.00

A simple test method for measuring the relative corrosiveness of solutions used for chemical cleaning in a static system at temperatures greater than 100°C (212°F). Historical Document 1998

Available for download

To Cycle or Not to Cycle: That is the Question

Product Number: 51217-037-SG

Author: Carl Reed, Travis Boerma, Kat Coronado, Steve Vento

Publication Date: 2017

$20.00

Previous papers by two of the authors have examined 1) the futility of attempting to correlate accelerated corrosion testing results to real world corrosion observations, and 2) how corrosion testing is useful as an indicator of performance without the need for real world correlation and what may be expected in a corrosive environment and how these results can be usefully applied in the real world. This third paper in the trilogy, examines a specific attribute of accelerated corrosion testing, that being the utility of wet/dry cycling testing versus continuous fog methods.

Available for download

Toward Objective Evaluation Of FRP Corrosion Barrier Condition

Product Number: 51322-17669-SG

Author: Geoff Clarkson

Publication Date: 2022

$20.00

Fiber reinforced polymer (FRP) and other polymeric materials are used in many ways to reduce and manage corrosion damage for industrial, infrastructure and municipal applications. It is common practice to use the term “resin” for polymers in these materials. This paper uses polymer interchangeably with resin. This paper will also only consider glass fiber reinforcements.

Available for download

TR01105-2020, Sacrificial Cathodic Protection of Reinforced Concrete Elements—A State-of-the-Art Report

Product Number: TR01105-2020

Publication Date: 2020

$109.00

This technical report presents state-of-the-art information on several commercially available galvanic cathodic protection/prevention systems for protecting atmospherically exposed reinforced concrete structures. The information contained in this report has been provided by key manufacturers of these systems and is intended as a technical resource for engineers responsible for the rehabilitation of reinforced concrete structures. It may also be useful to owners, contractors, and other practitioners related to the field of galvanic cathodic protection (CP). All information related to galvanic CP is intended for atmospherically exposed concrete structures and may not be applicable to concrete containing epoxy-coated reinforcing steel, galvanized, or other coated or nonferrous reinforcement.

Available for download

TR3T199-2020, Techniques for Monitoring and Measuring Corrosion and Related Parameters in Field Applications

Product Number: TR3T199-2020

Publication Date: 2020

$109.00

Revised in 2020! Assessment of corrosion in the field is complex because of the variety of applications, process conditions, and fluid phases that exist in industrial plants where corrosion occurs. A wide range of direct and indirect measurement techniques is available, but each technique has its strengths and weaknesses. In some applications, certain techniques cannot be used. Some techniques can be used online, while others are used off-line. Commonly, more than one technique is used so the weaknesses of one are compensated for by the strengths of another. In other cases, a combination of different techniques can be synergistic, such as process sampling along with detection of corrosion upset.

The purpose of this technical committee report is to analyze the various techniques with respect to their benefits and limitations across the broad spectrum of industries in which they are used.

This revision incorporates Guided Wave Monitoring (GWM), On-Line Gas Chromatography (GC), and Acoustic Solid Detection (ASD) techniques and updates references to NACE standards.

Available for download

TR46107-2020 “Control of Corrosion, Deposition, and Microbiological Growth in Heating, Ventilation, and Air Conditioning Recirculating Water Systems in Buildings”

Product Number: TR46107-2020

Publication Date: 2020

$109.00

This technical report applies to water-using cooling and heating systems in buildings. It provides information for minimizing system damage and operational interference because of corrosion, scale, fouling, and microbiological growth in building heating, ventilation, and air conditioning (HVAC) systems. This includes open and closed circulating water systems, low-pressure steam boilers and hot water “boilers.” The document also addresses thermal energy storage systems, but does not address potable water or fire protection systems. It is intended for use by building owners and engineering, maintenance, and operations management personnel. It is also intended for use by those involved in the design and construction of building HVAC systems so that corrosion, scale, fouling, and microbiological growth problems described above can be understood, anticipated, and minimized through appropriate design decisions.

Available for download

Tralopyril Antifouling Agent

Product Number: 41213-753-SG

Author: David Hunter

Publication Date: 2013

$20.00

Tralopyril was developed as a marine antifouling agent for use in antifouling coatings. The compound has been registered with the US EPA since 2007. Since then, a range of marine coatings have been developed utilizing tralopyril for control of barnacles and other invertebrate animal fouling organisms, frequently, but not exclusively, in combination with a soft fouling control agent.

Available for download

Translational Corrosion Science

Product Number: 41215-888-SG

Author: D. Dunmire, G. Keller

Publication Date: 2015

$20.00

Translational science itself is not a new scientific process. Since investigative science experiments were established and results measured, basic and applied science has been translated into useful applications. However, science has not always been investigative or effectively translated into useful applications. And when it has, the translation often consumed a significant amount of time and faced considerable implementation obstacles.

Corrosion Monitoring and Control

Association for Materials Protection and Performance