Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

11245 Flow-Induced Corrosion and Erosion-Corrosion Assessment of Carbon Steel Pipework in Oil and Gas Production

Picture for 11245 Flow-Induced Corrosion and Erosion-Corrosion Assessment of Carbon Steel Pipework
Available for download
Product Number: 51300-11245-SG
ISBN: 2011 11245 CP
Author: Richard Barker, Xinming Hu and Anne Neville
Publication Date: 2011
$0.00
$20.00
$20.00
A flow-induced corrosion and erosion-corrosion investigation was conducted to determine the degradation rates and mechanisms that had been experienced in service in the pipework of an offshore facility. The investigation reviewed the flow-induced corrosion and erosion-corrosion performance of the carbon steel parent metal of the pipework in comparison to the heat affected zone (HAZ) and the nickel-molybdenum weld material. The programme of experiments assessed the potential of two corrosion inhibitors to adequately control the material degradation caused by static corrosion, flowinduced corrosion and erosion-corrosion on the three regions. Static corrosion tests were performed using linear polarisation in CO2 saturated conditions. Flow-induced corrosion and erosion-corrosion experiments were conducted utilising a submerged impinging jet (SIJ) in CO2 saturated conditions at a fluid velocity of 7m/s with sand loadings of 0mg/L and 100mg/L. The effects of flow-induced corrosion and erosion-corrosion were studied using gravimetric techniques. Mechanisms were discussed based upon results obtained from micro-structural studies.

Key words: erosion, corrosion, flow-induced, erosion-corrosion, nickel-molybdenum weld, submerged impinging jet, carbon dioxide, velocity, sand, inhibitor.
A flow-induced corrosion and erosion-corrosion investigation was conducted to determine the degradation rates and mechanisms that had been experienced in service in the pipework of an offshore facility. The investigation reviewed the flow-induced corrosion and erosion-corrosion performance of the carbon steel parent metal of the pipework in comparison to the heat affected zone (HAZ) and the nickel-molybdenum weld material. The programme of experiments assessed the potential of two corrosion inhibitors to adequately control the material degradation caused by static corrosion, flowinduced corrosion and erosion-corrosion on the three regions. Static corrosion tests were performed using linear polarisation in CO2 saturated conditions. Flow-induced corrosion and erosion-corrosion experiments were conducted utilising a submerged impinging jet (SIJ) in CO2 saturated conditions at a fluid velocity of 7m/s with sand loadings of 0mg/L and 100mg/L. The effects of flow-induced corrosion and erosion-corrosion were studied using gravimetric techniques. Mechanisms were discussed based upon results obtained from micro-structural studies.

Key words: erosion, corrosion, flow-induced, erosion-corrosion, nickel-molybdenum weld, submerged impinging jet, carbon dioxide, velocity, sand, inhibitor.
Product tags
Also Purchased
Picture for 09479 Erosion-Corrosion Failure of a Carbon Steel Pipe Elbow - A Case Study
Available for download

09479 Erosion-Corrosion Failure of a Carbon Steel Pipe Elbow - A Case Study

Product Number: 51300-09479-SG
ISBN: 09479 2009 CP
Author: Rick Mcnealy, Ming Gao and Samarth Tandon
Publication Date: 2009
$20.00

An elbow leak was encountered after 3 years of operation of a carbon steel flow line from an artificial lift (rod pump) well.  Methods for prevention of similar failure are discussed in terms of design and inhibition.
Picture for Erosion-Corrosion Study of Oilfield Materials Due to Liquid Impact
Available for download

Erosion-Corrosion Study of Oilfield Materials Due to Liquid Impact

Product Number: 51315-6136-SG
ISBN: 6136 2015 CP
Author: Hadi Arabnejad Khanouki
Publication Date: 2015
$20.00

The goal of this work is to determine erosion-corrosion damage caused by liquid impact in the oil and gas industry.

Picture for 08572 Erosion-Corrosion in Disturbed Liquid/Particle Flow
Available for download

08572 Erosion-Corrosion in Disturbed Liquid/Particle Flow

Product Number: 51300-08572-SG
ISBN: 08572 2008 CP
Author: Joshua Addis, Srdjan Nesic, and Bruce Brown
Publication Date: 2008
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support