Search
Filters
Close

09479 Erosion-Corrosion Failure of a Carbon Steel Pipe Elbow - A Case Study

An elbow leak was encountered after 3 years of operation of a carbon steel flow line from an artificial lift (rod pump) well.  Methods for prevention of similar failure are discussed in terms of design and inhibition.

Product Number: 51300-09479-SG
ISBN: 09479 2009 CP
Author: Rick Mcnealy, Ming Gao and Samarth Tandon
Publication Date: 2009
$0.00
$20.00
$20.00

An elbow leak was encountered after 3 years of operation of a carbon steel flow line from an artificial lift (rod pump) well. Examination of the interior surface of the elbow revealed that the surface was entirely protected by a black corrosion scale with no active corrosion except at the small area localized near the down stream girth weld where the leak occurred. Calculations showed that the flow rates were an order of magnitude below the critical flow rates for erosion/corrosion per API RP14E, suggesting erosion was not the sole reason for the observed leak. Based on the macroscopic and XRD analyses, a two-step mechanism is proposed: (a) impingement of sand-containing fluid flow that destroys protective film and scale and (b) exposes the base metal (localized anode) and attacks it by galvanic corrosion where reformation of the protective scale is impeded due to constant impingement by localized fluid/particle flow. This self-facilitated process can result in a rate of localized corrosion orders of magnitude greater than those caused by pure erosion or corrosion and explains the observed leak. Methods for prevention of similar failure are discussed in terms of design and inhibition.

Keywords: Erosion-Corrosion, Carbon Steel Elbow leak, CO2 corrosion, O2 Corrosion, Chemical inhibition

An elbow leak was encountered after 3 years of operation of a carbon steel flow line from an artificial lift (rod pump) well. Examination of the interior surface of the elbow revealed that the surface was entirely protected by a black corrosion scale with no active corrosion except at the small area localized near the down stream girth weld where the leak occurred. Calculations showed that the flow rates were an order of magnitude below the critical flow rates for erosion/corrosion per API RP14E, suggesting erosion was not the sole reason for the observed leak. Based on the macroscopic and XRD analyses, a two-step mechanism is proposed: (a) impingement of sand-containing fluid flow that destroys protective film and scale and (b) exposes the base metal (localized anode) and attacks it by galvanic corrosion where reformation of the protective scale is impeded due to constant impingement by localized fluid/particle flow. This self-facilitated process can result in a rate of localized corrosion orders of magnitude greater than those caused by pure erosion or corrosion and explains the observed leak. Methods for prevention of similar failure are discussed in terms of design and inhibition.

Keywords: Erosion-Corrosion, Carbon Steel Elbow leak, CO2 corrosion, O2 Corrosion, Chemical inhibition

Also Purchased
Picture for Erosion-Corrosion Study of Oilfield Materials Due to Liquid Impact
Available for download
Picture for 11245 Flow-Induced Corrosion and Erosion-Corrosion Assessment of Carbon Steel Pipework
Available for download

11245 Flow-Induced Corrosion and Erosion-Corrosion Assessment of Carbon Steel Pipework in Oil and Gas Production

Product Number: 51300-11245-SG
ISBN: 2011 11245 CP
Author: Richard Barker, Xinming Hu and Anne Neville
Publication Date: 2011
$20.00