Menu
Search
Filters
Close
Menu

11043 The Effect of Substrate Topography on Cathodic Delamination

Picture for 11043 The Effect of Substrate Topography on Cathodic Delamination
Available for download
Product Number: 51300-11043-SG
ISBN: 2011 11043 CP
Author: Claus E. Weinell, Per A. Soerensen, Soeren Kiil
Publication Date: 2011
$0.00
$20.00
$20.00
The effect of steel substrate topography on cathodic delamination has been investigated in this study. Different surface preparation methods have been used to prepare different surface contours. The rate of delamination was found to be reduced by a greater tortuosity of the coating-steel interface. Furthermore it was found that the tortuosity of the coating-steel interface can be controlled by e.g. the grain size of the blasting material and the impact velocity of the applied abrasive. In other words the study showed that the surface preparation can be used to control and minimize the rate of cathodic delamination. However, the peak density should not be too high because the valleys may become too narrow for complete wetting. This may be particularly important for pigmented coatings because pigment particles may get trapped in the valley and prevent complete wetting of the substrate. In other words, the coating’s physical properties should be optimized with maximum wetting properties so that substrates with high tortuosity can be utilised.

Key words: Cathodic delamination, substrate topography, tortuosity.
The effect of steel substrate topography on cathodic delamination has been investigated in this study. Different surface preparation methods have been used to prepare different surface contours. The rate of delamination was found to be reduced by a greater tortuosity of the coating-steel interface. Furthermore it was found that the tortuosity of the coating-steel interface can be controlled by e.g. the grain size of the blasting material and the impact velocity of the applied abrasive. In other words the study showed that the surface preparation can be used to control and minimize the rate of cathodic delamination. However, the peak density should not be too high because the valleys may become too narrow for complete wetting. This may be particularly important for pigmented coatings because pigment particles may get trapped in the valley and prevent complete wetting of the substrate. In other words, the coating’s physical properties should be optimized with maximum wetting properties so that substrates with high tortuosity can be utilised.

Key words: Cathodic delamination, substrate topography, tortuosity.
Product tags
Also Purchased
Picture for 11052 Cathodic Protection Behavior of API X-52 and API X-65 Steels Buried in Natural Soil
Available for download

11052 Cathodic Protection Behavior of API X-52 and API X-65 Steels Buried in Natural Soil

Product Number: 51300-11052-SG
ISBN: 11052 2011 CP
Author: Diego Mendoza, Andres Aguilar and Ramiro Perez
Publication Date: 2011
$20.00
Picture for 11028 Accelerated Aging of Fusion Bonded Epoxy Coatings
Available for download

11028 Accelerated Aging of Fusion Bonded Epoxy Coatings

Product Number: 51300-11028-SG
ISBN: 2011 11028 CP
Author: Fabio Aguirre and Don Kirkpatrick
Publication Date: 2011
$20.00
Picture for 11037 A Review of the Robustness of Epoxy Passive Fire Protection (PFP) to Offshore Environments
Available for download

11037 A Review of the Robustness of Epoxy Passive Fire Protection (PFP) to Offshore Environments

Product Number: 51300-11037-SG
ISBN: 2011 11037 CP
Author: Robin Wade
Publication Date: 2011
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support