FBE coatings are known to absorb moisture and pass current. They allow current to pass and
exhibit a reduced electrical resistance under cathodic protection. The results of cathodic
disbonding and EIS tests for FBE coatings show that with increasing of permittivity factor of
coating, the radius of cathodic disbandment increases. When epoxy exposes in electrolyte, the
diffusion of ions and water in coating caused of reduction of electrical resistance. The cathodic
disbonding radius (r) decreases with diminish passing ions and water from epoxy coating. The
precise mode by which water and ions enter organic coatings when subjected to corrosive
environments remains unresolved. Local electrochemical methods have provided insight into
the local nature of the under film degradation process. But these local electrochemical
methods have not provided conclusive evidence as to whether the transport of water and ions
occur through discrete or regional heterogeneities within the organic film. The mode of water
diffusion and interaction with liquid and powder epoxy coatings that used for internal and
external coating of pipe line with fluorescence microscopy and AFM methodology was
investigated. It seems that the flux of water and ions across the film by the presence of small
imperfections or pores which extend through the thickness of coating and have cross-sections
that are larger than free areas typically present between the molecular chains of matrix for the
ions passing through the bulk matrix of the polymer film. Furthermore, there are regional
differences within a single coating with regards to ion selectivity.
Key words: Fluorescence, AFM, Electrolyte, Ions, Liquid and Powder Epoxy Coating, Diffusion