Save 20% on select titles with code HIDDEN24 - Shop The Sale Now
Testing procedures on a buried or submerged steel, cast iron, copper, or aluminum pipeline. Instrumentation and measurement guidelines. Voltage drop considerations for pipe-to-electrolyte measurements.
Provides testing procedures to comply with the requirements of a criterion at a test site on a buried or submerged steel, cast iron, copper, or aluminum pipeline. Contains instrumentation and general measurement guidelines. Includes methods for voltage drop considerations when making pipe-to-electrolyte potential measurements and provides guidance to prevent incorrect data from being collected and used. THIS PRODUCT IS DOWNLOADABLE PDF ONLY.
Key words: cathodic protection, measurement, pipelines, tanks, underground corrosion, test methods, standards and reports developed by STG 35 – pipelines, well casings
HISTORICAL DOCUMENT. This standard test method provides descriptions of the measurement techniques and cautionary measures most commonly used on underground and submerged piping other than offshore piping to determine whether a specific criterion has been met at a test site. This standard contains instrumentation and general measurement guidelines. It includes methods for voltage drop considerations when structure-to-electrolyte potential measurements are made and provides guidance to minimize incorrect data from being collected and used. This standard is maintained by Task Group 020.
We are unable to complete this action. Please try again at a later time.
If this error continues to occur, please contact AMPP Customer Support for assistance.
Error Message:
Please login to use Standards Credits*
* AMPP Members receive Standards Credits in order to redeem eligible Standards and Reports in the Store
You are not a Member.
AMPP Members enjoy many benefits, including Standards Credits which can be used to redeem eligible Standards and Reports in the Store.
You can visit the Membership Page to learn about the benefits of membership.
You have previously purchased this item.
Go to Downloadable Products in your AMPP Store profile to find this item.
You do not have sufficient Standards Credits to claim this item.
Click on 'ADD TO CART' to purchase this item.
Your Standards Credit(s)
1
Remaining Credits
0
Please review your transaction.
Click on 'REDEEM' to use your Standards Credits to claim this item.
You have successfully redeemed:
Go to Downloadable Products in your AMPP Store Profile to find and download this item.
This guide covers and describes the factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include apparatus, sampling, test specimen, test conditions (test solution composition, temperature, gas sparging, fluid motion, solution volume, method of supporting test specimens, duration of test), methods of cleaning test specimens, imterpretation of results, and calulation of corrosion rates. This guide also emplasizes the importance of recording all pertinent data and provides a checklist for reporting test data.
Defines the Light Cleaning (WJ-4) degree of surface cleanliness of metallic substrates by the use of waterjet cleaning. One of four (Clean to Bare Substrate, Very Thorough, Thorough, Light).