Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

The Four “W’s” of Dehumidification; Why, What, When, and Where

The Four “W’s” of Dehumidification; Why, What, When, and Where
Available for download

This presentation compares the operation, features, benefits and costs associated with different types of dehumidification equipment, including the newer mechanical type, in order to provide the audience with a better understanding of seasonal equipment selection.

Product Number: 41206-233-SG
Author: Tom Dillon
Publication Date: 2006
Industry: Corrosion Monitoring and Control
$0.00
$20.00
$20.00

This presentation compares the operation, features, benefits and costs associated with different types of dehumidification equipment, including the newer mechanical type, in order to provide the audience with a better understanding of seasonal equipment selection.

This presentation compares the operation, features, benefits and costs associated with different types of dehumidification equipment, including the newer mechanical type, in order to provide the audience with a better understanding of seasonal equipment selection.

Product tags
Also Purchased
Ultra High Pressure Waterjetting as a Means of Surface Preperation for Marine Coatings Systems
Available for download

Ultra High Pressure Waterjetting as a Means of Surface Preperation for Marine Coatings Systems

Product Number: 41206-218-SG
Author: David P. Allerton, Nicole S. Bokisa, Brian S. Skerry
Publication Date: 2006
$20.00

The objective of this study was to examine the effects of an ultra-high pressure (UHP) waterjetting surface preparation (>25,000 psi) on the performance properties of select marine/offshore coating epoxy systems. Uncoated steel panels had been allowed to rust in an outdoor atmospheric environment and then were subjected to UHP waterjetting
Using Dehumidification to Dry a Concrete Slab Prior to Coating
Available for download

Using Dehumidification to Dry a Concrete Slab Prior to Coating

Product Number: 41206-222-SG
Author: Russ Brown
Publication Date: 2006
$20.00

Moisture is a key component of concrete.  It is critical to the curing and strengthening process of the product. It is however the use or misuse of this critical component that may cause expensive and unavoidable problems over the life of the floor
The Performance of Waterborne Acrylic Coatings in an Accelerated Testing Protocol
Available for download

The Performance of Waterborne Acrylic Coatings in an Accelerated Testing Protocol

Product Number: 41206-226-SG
Author: Colleen Campbell, Leo J. Procopio
Publication Date: 2006
$20.00

Traditionally, a zinc-rich primer, epoxy midcoat and polyurethane topcoat have been the standard 3-coat solvent borne system used for coating structural steel, such as in the maintenance of bridges. This study describes the performance of waterborne acrylic coating systems in an accelerated testing protocol including corrosion resistance and cyclic weathering. A comparison of systems based solely on waterborne acrylic coatings, as well as hybrid systems (e.g., zinc rich primer with waterborne topcoats), to the industry standard will be discussed.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support