Menu
Search
Filters
Close
Menu

RP0286-1986, The Electrical Isolation of Cathodically Protected Pipelines

RP0286-1986, The Electrical Isolation of Cathodically Protected Pipelines
Available for download

This standard was prepared to supplement NACE Standards RP-01-69, RP-06-75 and RP-01-77.  Full details are provided of the  requirements to ensure adequate isolation of cathodically protected pipelines. Historical Document 1986

 

Product Number: 53060-HD1986
ISBN: 1-57590-041-6
Author: NACE/ICST
Publication Date: 1986
Industries: Pipelines, Tanks, and Underground Systems , Oil and Gas Production
$179.00
$179.00
$179.00

This standard is to be used in conjunction with NACE Standards RP-01-69 "Control of External Corrosion on Underground or Submerged Metallic Piping Systems (latest revision)," RP-06-75 "Control of Corrosion on Offshore Steel Pipelines," and RP-01-77 "Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems (latest revision)." In each of these standards, reference is  made to "electrical isolation" or "isolation joints," but details are not provided. This standard was prepared to supplement those standards, giving ffull details of the  requirements necessary to ensure adequate isolation of cathodically protected pipelines. It must be emphasized that pipeline corrosion control by cathodic protection may be ineffective or impossible if the necessary isolation is not provided. Electrical isolation is of particular importance where cathodic protection is to be applied to a pipeline with a high quality dielectric coating.

This standard does not discuss situations in which isolating devices are incorporated purely for safety reasons. In these situations, reference should be made to the relevant electrical safety code.

This standard was prepared by Task Group T-10A-15 on Electrical Isolation of Cathodically Protected Pipelines, a component of Unit Committee T-10A on Cathodic Protection, and is issued by NACE under the auspices of Group Committee T-10 on Underground Corrosion Control. The T-10A-15 Task Group was initiated by the UK Corrosion Control Engineering Joint Venture (CCEJV), a joint venture between NACE and the Institution of Corrosion Science and Technology (Birmingham, England).

Historical Document 1986

 

This standard is to be used in conjunction with NACE Standards RP-01-69 "Control of External Corrosion on Underground or Submerged Metallic Piping Systems (latest revision)," RP-06-75 "Control of Corrosion on Offshore Steel Pipelines," and RP-01-77 "Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems (latest revision)." In each of these standards, reference is  made to "electrical isolation" or "isolation joints," but details are not provided. This standard was prepared to supplement those standards, giving ffull details of the  requirements necessary to ensure adequate isolation of cathodically protected pipelines. It must be emphasized that pipeline corrosion control by cathodic protection may be ineffective or impossible if the necessary isolation is not provided. Electrical isolation is of particular importance where cathodic protection is to be applied to a pipeline with a high quality dielectric coating.

This standard does not discuss situations in which isolating devices are incorporated purely for safety reasons. In these situations, reference should be made to the relevant electrical safety code.

This standard was prepared by Task Group T-10A-15 on Electrical Isolation of Cathodically Protected Pipelines, a component of Unit Committee T-10A on Cathodic Protection, and is issued by NACE under the auspices of Group Committee T-10 on Underground Corrosion Control. The T-10A-15 Task Group was initiated by the UK Corrosion Control Engineering Joint Venture (CCEJV), a joint venture between NACE and the Institution of Corrosion Science and Technology (Birmingham, England).

Historical Document 1986

 

Product tags
Also Purchased
Picture for Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations
Available for download

RP0475-1975, Selection Of Metallic Materials to be Used in All Phases of Water Handling for Injection into Oil Bearing Formations

Product Number: 53028-HD1975
Author: NACE
Publication Date: 1975
$179.00

HISTORICAL DOCUMENT. Selecting corrosion resistant metallic materials for supply, storage, pumping and injection of water encountered in oil field operations. Historical Document 1975
Picture for Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems
Available for download

RP0392-1992, Recovery and Repassivation After Low pH Excursions in Open Recirculating Cooling Water Systems

Product Number: 53089-HD1992
Author: NACE International
Publication Date: 1992
$179.00

Guidelines for preparing for, recovering from, and repassivation after a low pH excursion... Procedures applicable to mild steel and need to be modified for other materials. Historical Document 1992
Picture for Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape
Available for download

RP0287-1991, Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape

Product Number: 53064-HD1991
Author: NACE International
Publication Date: 1991
$179.00

Procedure for on-site measurement of the surface profile of abrasive blast cleaned steel.  Compares well with laboratory measurements on surfaces rated as NACE Nos. 1, 2, or 3 standards. Suggestions for implementation. Historical Document 1991

 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support