Menu
Search
Filters
Close
Menu

ANSI/NACE MR0175-HD1996-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 1998

ANSI/NACE MR0175-HD1996-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 1998
Available for download

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment & field processing facilities to be used in  H2S-bearing hydrocarbon service.  Historical Document 1996

Product Number: 21302-HD1996
ISBN: 1-57590-021-1
Author: NACE International
Publication Date: 1996
Industry: Corrosion Monitoring and Control
$179.00
$179.00
$179.00

This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for
petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in
hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard is applicable to the materials and/or equipment specified by the materials standards institutions listed in Table 5 (or by equivalent standards or specifications of other agencies). This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower- strength steels used for pipelines and vessels may be subjected to failure by blister cracking or stepwise cracking as a result of hydrogen damage associated with general corrosion in the presence of H2S. Also, austenitic stainless steels and even more highly alloyed materials may fail by a type of chloride stress corrosion cracking that is promoted by elevated temperature, aggravated in some cases by the presence of H2S.

Historical Document1996

This standard presents metallic material requirements for resistance to sulfide stress cracking (SSC) for
petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in
hydrogen sulfide (H2S)-bearing hydrocarbon service. This standard is applicable to the materials and/or equipment specified by the materials standards institutions listed in Table 5 (or by equivalent standards or specifications of other agencies). This standard does not include and is not intended to include design specifications. Other forms of corrosion and other modes of failure, although outside the scope of this standard, should also be considered in design and operation of equipment. Severely corrosive conditions may lead to failures by mechanisms other than SSC and should be mitigated by corrosion inhibition or materials selection, which are outside the scope of this standard. For example, some lower- strength steels used for pipelines and vessels may be subjected to failure by blister cracking or stepwise cracking as a result of hydrogen damage associated with general corrosion in the presence of H2S. Also, austenitic stainless steels and even more highly alloyed materials may fail by a type of chloride stress corrosion cracking that is promoted by elevated temperature, aggravated in some cases by the presence of H2S.

Historical Document1996

Product tags
Also Purchased
Picture for Metallic Materials for Sucker Rod Pumps for Hydrogen Sulfide Environments
Available for download

NACE MR0176-HD1976-SG Metallic Materials for Sucker Rod Pumps for Hydrogen Sulfide Environments-HD1976

Product Number: 21303-HD1976
$179.00

Supplement API Standard 11AX (6th ed., 1971) specifying the material requirements of metallic materials for the construction of sucker-rod pumps for service in hydrogen sulfide environments. Only pumps with one-piece barrels and metal plungers have been considered in this standard.
NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
Available for download

NACE Emergency Guideline 1-HD1995-SG Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

Product Number: 21391-HD1995
Publication Date: 1995
$179.00

Factors that make electrical substation painting unique.  Worker safety and painting of radiators.  Providing owners, engineers, and maintenance personnel with sample specifications that they may modify to meet their specific requirements. Historical Document 1995
MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996
Available for download

MR0274-HD1995-SG Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings-HD1996

Product Number: 21301-HD1995
Author: NACE International
Publication Date: 1995
$179.00

Material requirements for three types of polyolefin-based, cold-applied tapes used in coating pipelines - including pressure-sensitive and butyl-laminate tapes. Historical Document 1995
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support