AMPP Store - Products tagged with 'oilfield production equipment'

Available for download

51318-10534-The Application of Solid Scale Inhibitor in Deepwater Completion to Reduce Well Intervention Costs

Product Number: 51318-10534-SG

Author: Sumit Bhaduri / Crystal Lowe / Dong Shen / Marty Usie / D.V. Satya Gupta

Publication Date: 2018

$20.00

A high-strength, alumina-based solid scale inhibitor - developed for subsea applications – was applied to four zones in two deepwater Gulf of Mexico wells. Results were examined after 17 months of production.

Available for download

ANSI/NACE MR0103-2015/ISO 17945:2015 (R2023), Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments

Product Number: ANSI-NACE MR0103-2023

Publication Date: 2023

$200.00

Establishes material requirements for resistance to SSC in sour petroleum refining and related processing environments containing H2S either as a gas or dissolved in an aqueous (liquid water) phase with or without the presence of hydrocarbon. This International Standard does not include and is not intended to include design specifications. Other forms of wet H2S cracking, environmental cracking, corrosion, and other modes of failure are outside the scope of this International Standard. It is intended to be used by refiners, equipment manufacturers, engineering contractors, and construction contractors.

Specifically, this International Standard is directed at the prevention of SSC of equipment (including pressure vessels, heat exchangers, piping, valve bodies, and pump and compressor cases) and components used in the refining industry. Prevention of SSC in carbon steel categorized under P-No. 1 in Section IX of the ASME Boiler and Pressure Vessel Code (BPVC) is addressed by requiring compliance with NACE SP0472.

This international standard applies to all components of equipment exposed to sour refinery environments (see Clause 6) where failure by SSC would (1) compromise the integrity of the pressure-containment system, (2) prevent the basic function of the equipment, and/or (3) prevent the equipment from being restored to an operating condition while continuing to contain pressure.

Available for download

ANSI/NACE MR0103-2015/ISO 17945-2015, “Petroleum, petrochemical and natural gas industries -- Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments”

Product Number: 21305-SG

Publication Date: 2015

$180.00

HISTORICAL DOCUMENT. Material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments (i.e., environments that contain wet hydrogen sulfide [H2S]). AKA "wet H2S cracking".

CORRECTION OF PUBLICATION:

In January 2016, NACE published an incorrect version of ANSI/NACE MR0103/ISO 17945:2015 (Petroleum, petrochemical and natural gas industries — Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments). That document was incorrectly titled ANSI/NACE MR0103/ISO 17495:2016. The erroneous standard was retracted at the time and the NACE Store has the corrected version. NOTE: The contents of both versions of the standard are identical. The only discrepancies are in the title.

Available for download

ANSI/NACE MR0175/ISO 15156-2009

Product Number: 21307-HD2009

Publication Date: 2009

$400.00

2009 EDITION - HISTORICAL DOCUMENT.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in oil and natural gas production and treatment plants with H2S-containing environments.

ANSI/NACE MR0175/ISO 15156-2009 (Chinese), Petroleum and Natural Gas Industries—Materials for Use in H2S-Containing Environments in Oil and Gas Production

Product Number: 21310-SG

ISBN: 1-57590-176-5

Publication Date: 2009

$310.00

CHINESE TRANSLATION. Selection and qualification of carbon and alloy steels for service in oil and natural gas production & treatment in H₂S-containing environments. Multiple downloadable files.

ANSI/NACE MR0175/ISO 15156-2015

Product Number: 21307-SG

ISBN: MR0175/ISO15156

Publication Date: 2015

$255.00

HISTORICAL DOWNLOADABLE 2015 EDITION.

Selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment in oil and natural gas production and NG treatment plants in H2S-containing

ANSI/NACE MR0175-2021/ISO 15156:2020

Product Number: ANSI-NACE MR0175-2021

Publication Date: 2021

$495.00

Note: This document was originally published with errors in Table A.16, page 3-32. These identified errors are corrected. Errata sheet is included.

NACE MR0175/ISO 15156 gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels, corrosion-resistant alloys, and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure could pose a risk to the health and safety of the public and personnel or to the equipment itself.

Available for download

ANSI/NACE MR0175-HD1995-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment-HD1995

Product Number: 21302-HD1995

Author: NACE International

Publication Date: 1995

$179.00

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment, and field processing facilities to be used in hydrogen sulfide (H2S)-bearing hydrocarbon service. Historical Document 1995

Available for download

ANSI/NACE MR0175-HD1996-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment 1998

Product Number: 21302-HD1996

ISBN: 1-57590-021-1

Author: NACE International

Publication Date: 1996

$179.00

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment & field processing facilities to be used in H2S-bearing hydrocarbon service. Historical Document 1996

Available for download

ANSI/NACE MR0175-HD2002-SG Sulfide Stress Cracking Resistant Metallic Materials for Oilfield Equipment-HD2002

Product Number: 21304-HD2002

Author: NACE International

Publication Date: 2002

$179.00

Metallic material requirements for resistance to sulfide stress cracking (SSC) for petroleum production, drilling, gathering and flowline equipment in hydrogen sulfide (H2S)-bearing hydrocarbon service. Historical Document 2002

Available for download

ANSI/NACE MR0175-HD2003-SG Metals for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments-HD2003

Product Number: 21302-HD2003

ISBN: 1-57590-021-1

Author: NACE International

Publication Date: 2003

$179.00

Metallic material requirements to provide resistance to sulfide stress cracking (SSC) and/or stress corrosion cracking (SCC) for petroleum production, drilling, gathering and flow line equipment in H2S service. Historical document 2003

Available for download

ANSI/NACE/ISO MR0103-HD2010, Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

Product Number: 21305-HD2010

ISBN: 1-57590-168-4

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This NACE Standard establishes material requirements for resistance to sulfide stress cracking (SSC) in sour refinery process environments, i.e., environments that contain wet hydrogen sulfide (H2S). It is intended to be used by refineries, equipment manufacturers, engineering contractors, and construction contractors.

Products tagged with 'oilfield production equipment'

Association for Materials Protection and Performance