Search
Filters
Close

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a)           to remove material from the surface that can cause early failure of the coating, and

b)           to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

 

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

 

Degree of Surface Cleanliness

Designation

White Metal Blast Cleaning

SSPC-SP5/NACE No. 1

Near-White Metal Blast Cleaning

SSPC-SP10/NACE No. 2

Commercial Blast Cleaning

SSPC-SP6/NACE No. 3

Industrial Blast Cleaning

SSPC-SP14/NACE No. 8

Brush-Off Blast Cleaning

SSPC-SP7/NACE No. 4

Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance

SSPC-SP18

 

Product Number: SSPC-SP 10/NACE No. 2-2024
Publication Date: 2024
$109.00
$109.00
$109.00

Or

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a)           to remove material from the surface that can cause early failure of the coating, and

b)           to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

 

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

 

Degree of Surface Cleanliness

Designation

White Metal Blast Cleaning

SSPC-SP5/NACE No. 1

Near-White Metal Blast Cleaning

SSPC-SP10/NACE No. 2

Commercial Blast Cleaning

SSPC-SP6/NACE No. 3

Industrial Blast Cleaning

SSPC-SP14/NACE No. 8

Brush-Off Blast Cleaning

SSPC-SP7/NACE No. 4

Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance

SSPC-SP18

 

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a)           to remove material from the surface that can cause early failure of the coating, and

b)           to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

 

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

 

Degree of Surface Cleanliness

Designation

White Metal Blast Cleaning

SSPC-SP5/NACE No. 1

Near-White Metal Blast Cleaning

SSPC-SP10/NACE No. 2

Commercial Blast Cleaning

SSPC-SP6/NACE No. 3

Industrial Blast Cleaning

SSPC-SP14/NACE No. 8

Brush-Off Blast Cleaning

SSPC-SP7/NACE No. 4

Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance

SSPC-SP18

 

Also Purchased
NoP Commerce Standards image
Available for download
NoP Commerce Standards image
Available for download

SSPC-SP 1-2016, Solvent Cleaning

Product Number: SSPC-SP 1-2016
Publication Date: 2016
$109.00