Menu
Search
Filters
Close
Menu

Sour Service Limit Of 17% Cr Stainless Steels Grades For OCTG

Picture for Sour Service Limit Of 17% Cr Stainless Steels Grades For OCTG
Available for download
Product Number: 51321-16637-SG
Author: Toshiyuki SUNABA/ Susumu HIRANO/ Thiago MESQUITA/ FranceHerve MARCHEBOIS/ Thierry CASSAGNE
Publication Date: 2021
$0.00
$20.00
$20.00

Recently, the use of 17% Cr seamless steel tubing has been a cost-effective solution for preventing high pressure and high temperature (HP/HT) CO2 corrosion environment with small amount of H2S. This paper focuses on the sulfide stress cracking (SSC) results of 17% Cr stainless steels in simulated conditions for HP/HT gas wells. In the frame of a qualification program, NACEa Standard Tensile Test, Method A was adopted in accordance with NACE TM0177. The influence of partial pressure of H2S was investigated at condensed and formation water conditions where SSC is likely to occur. In addition, a previous work on the localized corrosion and the stress corrosion cracking behavior of those grade is also discussed in this paper. The results were summarized in a sour service domain map and compared with previous published data. The results showed the applicability of this alloy for selected gas well conditions. .

Key words: 17%Cr, OCTG, CO2, H2S, SSC

Recently, the use of 17% Cr seamless steel tubing has been a cost-effective solution for preventing high pressure and high temperature (HP/HT) CO2 corrosion environment with small amount of H2S. This paper focuses on the sulfide stress cracking (SSC) results of 17% Cr stainless steels in simulated conditions for HP/HT gas wells. In the frame of a qualification program, NACEa Standard Tensile Test, Method A was adopted in accordance with NACE TM0177. The influence of partial pressure of H2S was investigated at condensed and formation water conditions where SSC is likely to occur. In addition, a previous work on the localized corrosion and the stress corrosion cracking behavior of those grade is also discussed in this paper. The results were summarized in a sour service domain map and compared with previous published data. The results showed the applicability of this alloy for selected gas well conditions. .

Key words: 17%Cr, OCTG, CO2, H2S, SSC

Product tags
Also Purchased
Picture for 03102 LIMITATIONS OF 17- 4 PH METALLURGICAL, MECHANICAL AND CORREOSION ASPECTS
Available for download

03102 LIMITATIONS OF 17- 4 PH METALLURGICAL, MECHANICAL AND CORROSION ASPECTS

Product Number: 51300-03102-SG
ISBN: 03102 2003 CP
Author: T. Cassagne, M. Bonis, C. Duret, J.L. Crolet
Publication Date: 2003
$20.00

In context of acceptability of 17-4 PH in sour service, an literature survey of complex metallurgy of this grade was done following a mechanical rupture in service. In addition, three 17-4 PH materials were studied in terms of microstructure, mechanical properties and susceptibility to sulfide stress cracking.
Picture for Enhanced Corrosion-Resistant Stainless Steel OCTG of 17Cr for Sweet and Sour Environments
Available for download

51313-02436-Enhanced Corrosion-Resistant Stainless Steel OCTG of 17Cr for Sweet and Sour Environments

Product Number: 51313-02436-SG
ISBN: 02436 2013 CP
Author: Yasuhide Ishiguro
Publication Date: 2013
$20.00
Picture for Failures of 17-4 pH Steel Parts in Non Sour Enviroments
Available for download

51314-4298-Failures of 17-4 pH Steel Parts in Non Sour Enviroments

Product Number: 51314-4298-SG
ISBN: 4298 2014 CP
Author: Annelise Zeemann
Publication Date: 2014
$20.00

This paper presents a failure of a material that was overloaded during testing although the raw material was approved based on certified mechanical properties. The failure was due to unsuitable microstructures.

 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support