Menu
Search
Filters
Close
Menu

Rust Creepage Mechanism for Offshore Atmospheric Coatings

Picture for Rust Creepage Mechanism for Offshore Atmospheric Coatings
Available for download

The service life of current offshore platform coatings are normally less than 10 years. It is very expensive ($100/ft2) to rehabilitate the offshore platform coatings in the field. Therefore, facility owners are very anxious to select the long-life coatings. The candidate coatings are normally tested in the lab following the ISO 12944-91 or the AMPP TM216122 standard.

Product Number: 51323-18754-SG
Author: Benjamin T. A. Chang
Publication Date: 2023
Industries: Oil and Gas , Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

Rust creepage test is the most frequently used qualification test to assess the corrosion resistance of candidate offshore atmospheric coatings. End users and coating manufacturers are using either the ISO 12944-9 or AMPP TM21612 test standard to measure the rust creepage of candidate coating systems in the lab. The lab test results are used by end users for the offshore coating selection. Lots of effort are spending on this lab test without a good understanding of the mechanism. It takes six months to run the ISO 12944-9 test and three months to run AMPP 21612 test. It is of great advantage to understand the rust creepage mechanism. The purpose of this work is to study the underfilm corrosion to shed light on the rust creepage mechanism. With a good understanding of the mechanism, the coating manufacturers may speed up the development of successful protective coating systems for the offshore coating industry.

Rust creepage test is the most frequently used qualification test to assess the corrosion resistance of candidate offshore atmospheric coatings. End users and coating manufacturers are using either the ISO 12944-9 or AMPP TM21612 test standard to measure the rust creepage of candidate coating systems in the lab. The lab test results are used by end users for the offshore coating selection. Lots of effort are spending on this lab test without a good understanding of the mechanism. It takes six months to run the ISO 12944-9 test and three months to run AMPP 21612 test. It is of great advantage to understand the rust creepage mechanism. The purpose of this work is to study the underfilm corrosion to shed light on the rust creepage mechanism. With a good understanding of the mechanism, the coating manufacturers may speed up the development of successful protective coating systems for the offshore coating industry.

Product tags
Also Purchased
Picture for Lessons Learned from Offshore Coating Programs
Available for download

Lessons Learned from Offshore Coating Programs

Product Number: 51317--9226-SG
ISBN: 9226 2017 CP
Author: Michael Yee
Publication Date: 2017
$20.00

This paper will cover the background of increasing regulations and audits, the reasons why many coatings and fireproofing systems prematurely fail, and also the solutions that may help address these issues that many operators face today.
Picture for Testing of Coatings for Offshore Service
Available for download

51318-10886-Testing of Coatings for Offshore Service

Product Number: 51318-10886-SG
Author: Abdulhameed Al-Hashem / Nusrat Tanoli
Publication Date: 2018
$20.00

A test protocol was developed to provide an assessment of the effects of various film defects as well as to perform post-exposure qualitative and quantitative evaluations on eight different coatings systems.
Picture for Surface Soluble salt concentration effect on long life offshore coatings systems performance
Available for download

51318-11132-Surface Soluble salt concentration effect on long life offshore coatings systems performance

Product Number: 51318-11132-SG
Author: The purpose of this work is to study the impact of the quality of steel surface preparation and the level of soluble salt contamination on the performance and durability of protective coating systems.
Publication Date: 2018
$20.00

The purpose of this work is to study the impact of the quality of steel surface preparation and the level of soluble salt contamination on the performance and durability of protective coating systems.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support