Menu
Search
Filters
Close
Menu

Protection of Interfaces in Natural Gas Compressor Stations and Petroleum Tank Farms

Protection of Interfaces in Natural Gas Compressor Stations and Petroleum Tank Farms
Available for download

This paper focuses on properly inspecting the performance of the coatings on pipe to support interfaces and soil to air interfaces, and what can be done to adequately plan for corrosion prevention and protect ambient temperature piping at natural gas compressor stations and petroleum tank farms.

Product Number: 51218-158-SG
Author: Chrissy Stewart
Publication Date: 2018
Industries: Pipelines, Tanks, and Underground Systems , Coatings
$0.00
$20.00
$20.00

An interface is best described as a point of contact between two objects, systems, or phases. In most industrial complex, piping systems and their interfaces are numerous and vary in types, including pipe to support, soil to air, pipe to wall, pipe to water, and hot to cold temperature gradients. Each type of interface requires special consideration, as its condition and accessibility may generate damage to the pipe, accelerate corrosion, or erode coating thickness over time. Designing protection of the interfaces where the pipe meets the pipe support or where the pipe enters the soil is a challenge and creates areas that require special attention and regular inspections. This paper focuses on properly inspecting the performance of the coatings on pipe to support interfaces and soil to air interfaces, and what can be done to adequately plan for corrosion prevention and protect ambient temperature piping at natural gas compressor stations and petroleum tank farms.

An interface is best described as a point of contact between two objects, systems, or phases. In most industrial complex, piping systems and their interfaces are numerous and vary in types, including pipe to support, soil to air, pipe to wall, pipe to water, and hot to cold temperature gradients. Each type of interface requires special consideration, as its condition and accessibility may generate damage to the pipe, accelerate corrosion, or erode coating thickness over time. Designing protection of the interfaces where the pipe meets the pipe support or where the pipe enters the soil is a challenge and creates areas that require special attention and regular inspections. This paper focuses on properly inspecting the performance of the coatings on pipe to support interfaces and soil to air interfaces, and what can be done to adequately plan for corrosion prevention and protect ambient temperature piping at natural gas compressor stations and petroleum tank farms.

Product tags
Also Purchased
Picture for 01238 CENTRIFUGAL COMPRESSOR IMPELLER STRESS
Available for download

01238 CENTRIFUGAL COMPRESSOR IMPELLER STRESS CORROSION AND CONRROSION FATIGUE CASE STUDY

Product Number: 51300-01238-SG
ISBN: 01238 2001 CP
Author: Qian Wang, Russell A. Houston, Ermanno Pasinetti
$20.00
Picture for Failure of a Vaned Diffuser in a Sour Gas Compressor
Available for download

Failure of a Vaned Diffuser in a Sour Gas Compressor

Product Number: 51317--9073-SG
ISBN: 9073 2017 CP
Author: Vishwas Gadgil
Publication Date: 2017
$20.00

Failure of a diffuser (with vanes, made from material P265GH) is investigated. The gas compressor was in service for over 10 years. The gas contained both CO2 and H2S. Relative humidity of the gas was 100 %. It was found that the diffuser was fractured in 3 locations.
Picture for 00683 FAILURE OF 13% CHROMIUM STAINLESS STEEL
Available for download

00683 FAILURE OF 13% CHROMIUM STAINLESS STEEL IMPELLER FROM HYDROGEN RECYCLE COMPRESSOR

Product Number: 51300-00683-SG
ISBN: 00683 2000 CP
Author: R. B. Setterlund, P.E., V.K. Malhotra and L. K. Friesen
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support