AMPP Store - Products tagged with 'ampp annual conference + expo 2023'

Available for download

The Advantages and Challenges of a Direct to Install AC Mitigation Approach: A Case Study

Product Number: 51323-19267-SG

Author: Joe Gallant, Darrell Cornet, Emer Flounders

Publication Date: 2023

$20.00

A large diameter, 1067 mm (42 in) and 914 mm (36 in), high pressure gas mainline, and four (4) smaller diameter lateral pipelines, between 406 mm (16 in) and 610 mm (24 in), were constructed in Alberta, Canada, between 1999 and 2000. At the time of construction, the pipelines were built in proximity to several high voltage alternating current (HVAC) transmission lines. In subsequent years, additional transmission lines were built near the pipeline system, bringing the total number of lines with significant proximity to eight (8).

Available for download

The Application of Zinc-Nickel for Corrosion Resistance Applications

Product Number: 51323-19347-SG

Author: Sarah Medeiros

Publication Date: 2023

$20.00

Electroplating is a coating technique used to apply a metallic deposit to alter the properties of the substrate surface. Traditional electroplating involves submerging a part into a tank of electrolyte plating solution and passing a current between the part and an anode, any area that should not be plated must be masked off. Brush electroplating is a portable method of electroplating localized areas without the use of an immersion tank.

Available for download

The Combined Influences of Microstructure, Strength, and Titanium Content on the Hydrogen Stress Cracking Resistance of Precipitation Hardened Nickel Alloys

Product Number: 51323-19348-SG

Author: Stephen A. McCoy, E. Buddy Damm, Brian A. Baker, William MacDonald

Publication Date: 2023

$20.00

Precipitation hardenable nickel alloys N09925, N07718, N09945, N09946 and N07725 provide high strength and excellent sour service corrosion resistance for critical downhole oilfield applications. This family of alloys achieves yield strength minimums ranging from 120 to 160 KSI (827-1103 MPa) and can withstand high temperatures and partial pressures of H2S. The primary strengthening mechanism is the formation of γ’ and γ” nanometer sized particles during an age hardening heat treatment.

Available for download

The Complex Synergy of Delayed Environmentally Assisted Cracking In Transmission Gear Assemblies

Product Number: 51323-19337-SG

Author: Joshua James

Publication Date: 2023

$20.00

Root cause analysis involves a detailed process of evidence collection, investigation of the evidence, subsequent analysis, and identification of corrective actions based on conclusions drawn from the evidence. The process when diagrammed out seems simple, however paramount to the process is identifying the problem or failure accurately. Misunderstanding the failure leads to misidentification of the root cause which in turn begets mitigation efforts that may or may not impactfully remediate the original failure.

Available for download

The Corrosion Susceptibility Index- A Physics-Based Indicator of Localized Corrosion and Environmental Assisted Cracking Susceptibility for Alloys

Product Number: 51323-19408-SG

Author: Christopher D Taylor

Publication Date: 2023

$20.00

During crack growth and localized corrosion, fresh metal surfaces become exposed to the chemical and electrochemical environment. Subsequent alteration of the material in the nascent pit or at the crack tip zone will be initiated by the surface chemical processes that template the subsequent reactivity. Quantum chemical calculations can provide a physics-based method to simulate the adsorption phenomena that occur in systems possessing multiple chemical species (such as water, chloride, hydrogen-sulfide, inhibitors, etc.), various pH levels, temperatures and electrochemical conditions.

Available for download

The Design and Operation of a Multi-System Approach for Cathodic Protection Systems of Inter-Bonded Complex Plants

Product Number: 51323-19264-SG

Author: Dr Kevin Kendell

Publication Date: 2023

$20.00

The use of a multi-system approach to cathodic protection is primarily driven by the increasing complexity of the types of structures, which are part of the common cathode in modern plants.

Traditionally cathodic protection systems and their designs were based on single cathode structures like cross country pipelines or individual tanks. As the technology matured CP was applied to a wider range of structures but usually the design philosophies adopted remained unchanged.

Available for download

The Development of a New Accelerated Corrosion Test Method Using Controlled Relative Humidity

Product Number: 51323-19475-SG

Author: Alexander Lilly, Mirella Vargas, Erica Macha, Dr. Steven Kopitzke, James Dante, Dr. Victor Rodriguez-Santiago

Publication Date: 2023

$20.00

Hexavalent chromium is utilized for the purpose of providing corrosion inhibition on many DoD assets in the form of surface treatments and primers. However, hexavalent chromium is also a known carcinogen and environmental toxin. As a result, processes which involve the application of hexavalent chromium will likely face increased regulation in the future.

Available for download

The Development of Mercaptan Scavenging Test Methods and the Evaluation of Scavenger Chemistries

Product Number: 51323-18839-SG

Author: Jody Hoshowski, Alyn Jenkins, Adnan Alhammoud, Rolando Perez Pineiro

Publication Date: 2023

$20.00

Despite its volatility the petroleum industry is still one of the leading sectors in the world economy in terms of revenue and job creation. The global oil and gas market size reached $5,870.13 billion in 2021 and there is optimism that it will surpass that mark in 2025 at a compound annual growth rate (CAGR) of 6%. To make this prediction possible it is important to ensure the continuous flow of oil and gas by implementing an efficient integrity management system to avoid pipeline failures.

Available for download

The Effect of Dissolved Calcium on Sour Corrosion

Product Number: 51323-19060-SG

Author: Jon Kvarekvål, Gaute Svenningsen, Marion Seiersten

Publication Date: 2023

$20.00

A large part of the remaining natural gas reserves worldwide is sour, i.e. H2S-containing. Many oil and gas fields, especially in North America, Central Asia and the Middle East, are highly sour with an H2S fraction of several percent. Internal corrosion in sour environments is associated with a high risk of severe localized corrosion attacks.

Available for download

The Effect of Halides on SCC Susceptibility of Carbon Steels Used in Nuclear Waste Tanks

Product Number: 51323-18830-SG

Author: B.C. Rollins, S. Chawla, J. Gerst, J.A. Beavers, J.S. Page, C.L. Girardot, S.T. Campbell, N. Sridhar

Publication Date: 2023

$20.00

The Hanford Nuclear Reservation contains radioactive and chemically hazardous wastes arising mostly from weapons production, beginning with World War II and continuing through the Cold War. The wastes are stored in 177 carbon steel underground storage tanks, of which 149 are single-shell tanks (SSTs) and the remaining are double-shell tanks (DSTs). The U.S. Department of Energy, Office of River Protection is responsible for retrieving the tank wastes, treating them in order to encapsulate them in glass logs, and then permanently closing the tanks and associated facilities.

Available for download

The Effect of Laboratory Atmospheric Environmental Parameters on Corrosion Fatigue Damage

Product Number: 51323-19396-SG

Author: Sarah E Galyon Dorman, Justin Rausch, Nathan Houser, Jenifer S. (Warner) Locke

Publication Date: 2023

$20.00

Age-hardenable aluminum alloys are used for many aerospace applications, where high strength and low density are required. In service, these alloys must withstand both demanding mechanical loads and corrosive environmental conditions. For components made of these alloys, problems may occur when mechanical stresses are present with a corrosive environment.

Available for download

The Effect of Long-Term Exposure Conditions on the Concrete Resistivity of Polymer-Modified Concrete Repair Mortars

Product Number: 51323-18842-SG

Author: Martin Cheytani, Sammy Lap Ip Chan

Publication Date: 2023

$20.00

In the rectification process of reinforced concrete structures, one of the primary considerations made is the selection of concrete repair methodology and repair products. The suitability of concrete repair products is determined by the structure’s function, and some of the main technical aspects which are considered include compressive strength, bond strength, shrinkage and expansion, tensile strength, chemical resistance, and flow characteristics.

Products tagged with 'ampp annual conference + expo 2023'

Association for Materials Protection and Performance