AMPP Store - Products tagged with 'ampp conference papers'

Available for download

Corrosion Behavior of Fe-Cr-Ni Alloys in Molten NaNO3-KNO3 Salt Mixture and Vapor

Product Number: 51323-18909-SG

Author: Qingyang Liu, Frederick Pessu

Publication Date: 2023

$20.00

The serious challenges for harvesting solar energy from solar power tower is the inherent intermittence caused by altering of day and night and by the weather event changes, posing a significant threat to the continuous supply of solar electricity. The most promising solution explored by the researchers during the last few decades would be integrating the thermal storage system with the Concentrated Solar Power Plant (CSP) to stabilise and provide the high-quality electrical energy at night or anytime without sufficient solar irradiance. Typical thermal energy storage system enables the CSP plants to store solar energy by heating the sensible storage medium, like molten nitrate salt in a hot tank.

Available for download

Corrosion Behavior of Martensite-Based Stainless Steels in Chloride Solutions Saturated with CO2 Containing Impurity Gases

Product Number: 51323-18908-SG

Author: Yuichi Kamo, Kenichiro Eguchi, Hiroyuki Takai

Publication Date: 2023

$20.00

Carbon Capture and Storage (CCS) is a countermeasure for the global warming issue, and the number of CCS projects has increased. One type of CCS is Enhanced Oil Recovery (EOR), in which CO2 is injected into oil or natural gas reservoirs. Because formation water, which usually has a high concentration of chloride, exists at the bottom of these reservoirs, the injection tubing will suffer corrosion when the formation water flows back to the tubing. Stainless steels have been applied as tubing materials for Oil Country Tubular Goods (OCTG), and showed excellent corrosion resistance under high temperature and high CO2 pressure conditions. Martensite-based stainless steels bearing 13 mass% Cr to 17 mass% Cr are one of these tubing materials and are also expected to be used in CO2 injection tubing.

Available for download

Corrosion Behavior Of Stainless Steel Food Processing Equipment In Low Ph Environments

Product Number: 51322-17783-SG

Author: Suresh Divi, Harbinder Pordal

Publication Date: 2022

$20.00

Food consists mainly of proteins, carbohydrates, and fats. Processed foods contain diverse aqueous solutions, syrups, and additives, used to improve food appearance, taste, quality and preservation. They have a wide pH range, components such as, salt, water, and vinegar impact food corrosivity.

Available for download

Corrosion Behavior Of Welded Austenitic Stainless Steels In Coastal Atmospheric Environment

Product Number: ED22-18359-SG

Author: Mei-Lin Chen, Tsung-Kuang Yeh, Mei-Ya Wang

Publication Date: 2022

$20.00

Austenitic stainless steels (SS) are the candidate materials for dry storage canisters. In general, high corrosion resistance is one of the advantageous properties of austenitic stainless steels. However, austenitic stainless steels are susceptible to chloride induced stress corrosion cracking (CISCC) when three criteria are satisfied: susceptible materials, tensile stress and corrosive environments. Dry storage canisters are located at a coastal site in Taiwan, as a result, canisters are exposed to high concentration of moisture and chloride salts under atmospheric environments.

Available for download

Corrosion Characterization And Performance Evaluation Of Co-Cr Alloys By Laser Powder Bed Fusion And Suitability Of Their Use For Pressure Containing Down-Hole Wear Components

Product Number: 51322-17580-SG

Author: Krutibas Panda, Reece Goldsberry, Brendan Voglewede

Publication Date: 2022

$20.00

Cobalt (Co) - Chromium (Cr) based alloys are known for exhibiting a superior combination of corrosion resistance, erosion resistance, galling resistance, and high temperature strength. They have found a wide variety of applications in automotive, aerospace, chemical and biomedical applications. They are frequently known as the Stellite† grade of families (ex: Stellite† 1, Stellite† 6, Stellite† 12, Stellite† 21, etc.) and are broadly classified into the Co-Cr-Mo-C and the Co-Cr-W-C systems. The relatively high Carbon (C)and Tungsten (W) containing (Co-Cr) alloys are mostly used for their high wear properties.

Available for download

Corrosion Condition Assessment Program For Marine Asset Management

Product Number: 51322-17750-SG

Author: Jeffrey S. West, Casey Jones, Stephen W. Foster

Publication Date: 2022

$20.00

This paper describes the development of a formal corrosion inspection and condition assessment program to support corrosion and asset management planning for maritime structures at Port Houston. A hierarchical, elemental-based inspection approach was developed using visual inspection criteria and prescribed measurements to characterize the condition of coatings and cathodic protection systems for above- and underwater elements in maritime structures.

Available for download

Corrosion Control In Water Injection Pipelines

Product Number: 51322-17692-SG

Author: Jonathan Marsh

Publication Date: 2022

$20.00

Dubai Petroleum (the Operator) operates five offshore oil fields in the Emirate of Dubai (Fateh, South West Fateh, Falah, Jallilah and Rashid), in addition to various onshore gas production, storage, distribution and import facilities, and LNG import facilities. The assets within these offshore fields consist of approximately 80 platforms of various sizes, comprising central bridge linked processing facilities in Fateh and South West Fateh, and outlying normally unmanned wellhead production platforms. These platforms are linked by a network of over 150 subsea pipelines, of which over 30 are presently operational sea water injection pipelines.

Available for download

Corrosion Fatigue Of X80 Weld In Mild Sour Environment

Product Number: 51322-17778-SG

Author: Laurent Ladeuille, Richard Jones, Yifei Zeng, Xin Yue, Chih-Hsiang Kuo, Florian Thébault, Grégory Toguyeni

Publication Date: 2022

$20.00

Pipelines and rigid risers made in conventional X65 grade require large wall thickness to withstand the high loads imposed during installation and under operating conditions in deep and ultra-deepwater field developments. The use of high-strength steels like X80 is an attractive alternative since it improves catenary weight by reducing wall thickness.

Available for download

Corrosion In Confined Environments - The Importance Of High Supersaturation Of Dissolved Corrosion Products

Product Number: 51322-18025-SG

Author: Arne Dugstad, Simona Palencsár

Publication Date: 2022

$20.00

The paper discusses how SR_FeCO3 affects the stability of the corrosion product films and how SR_FeCO3 can be used to estimate the equilibrium pressure of H₂S in the annulus.

Available for download

Corrosion In Dense Slurry And Models Performance

Product Number: 51322-17743-SG

Author: Kofi Freeman Adane, Aaron Fuhr

Publication Date: 2022

$20.00

Slurry pipeline systems are used for the extraction of bitumen from mined ore in the oil sands industry in Alberta, Canada. Most of these extraction processes are open to atmosphere resulting in significant air ingress and entrainment within the slurry pipelines used to transport mined ore and tailings. In addition, for short hydrotransport slurry pipelines, the slurry is conditioned by air to create bubbles coated with a bitumen film called “air-sacks”.

Available for download

Corrosion Inhibition Of Automotive Parts In Water-Ethylene Glycol Solutions

Product Number: 51322-17593-SG

Author: Behzad Bavarian, Koushik Kosanam, Lisa Reiner

Publication Date: 2022

$20.00

The efforts to lower automotive component weight to make cars more fuel efficient has increased the demand for aluminum alloys. In these applications, substantial amounts of heat are generated due to engine combustion, making it necessary to cool the engine systems. Metals in an engine application will rely on coolant to transfer heat. Corrosion behavior is another consideration for metals. Aluminum alloys, similar to the metals they are replacing, are sensitive to corrosion, especially in an aqueous alkaline environment.

Available for download

Corrosion Inhibition Of Carbon Steel In Carbonate Acidizing At Elevated Temperature

Product Number: 51322-17562-SG

Author: Limin Xu, Tao Chen, Ming Han, Mohammed Bataweel

Publication Date: 2022

$20.00

A suitable acid package in matrix acidizing application is very important to the stimulation employed to improve the productivity of carbonate reservoirs. Typically, concentrated acids between 5 and 28 wt% are used and the most used mineral acid for carbonate acidizing treatment is hydrochloric acid (HCl) ^1,2. A significant challenge of acidizing treatment is corrosion loss of metal tubulars due to the high reactivity of acid and metal, especially at high temperatures. Corrosion inhibitors are needed to reduce the corrosion loss of steel surface of facilities exposed in acidic environment.

Products tagged with 'ampp conference papers'

Association for Materials Protection and Performance