Menu
Search
Filters
Close
Menu

Products tagged with 'biocide'

View as
Sort by
Display per page
Picture for Methodology adopted to minimize the Risk of Oil and Gas Surface Facility during a Prolonged Shutdown Within Partitioned Zone (Kingdom of Saudi Arabia and Kuwait).
Available for download

51318-11037-Methodology adopted to minimize the Risk of Oil and Gas Surface Facility during a Prolonged Shutdown Within Partitioned Zone (Kingdom of Saudi Arabia and Kuwait).

Product Number: 51318-11037-SG
Author: Naser Al-Rasheed \ Tariq Kamshad \ Manickavasagan Sabesan \ A/Rahman Al-Ghamdi \ Ravi Shankar Siriki \ Mohamed M. Farah
Publication Date: 2018
$20.00

The methodology developed involved initially flushing the facilities with less saline water to remove deposits and sediments, and subsequently treating the entire facility with a mixture of corrosion inhibitor, oxygen scavenger and biocide in brackish water.
Picture for The Impact of Biocide Choice and Dosing Strategy on Successful MIC Management under Anoxic and Flowing Conditions
Available for download

51318-11295-The Impact of Biocide Choice and Dosing Strategy on Successful MIC Management under Anoxic and Flowing Conditions

Product Number: 51318-11295-SG
Author: Nora Eibergen / Philip Maun / Matthew Wier / Brittany Caldwell / Geert van der Kraan / Kenneth Wunch
Publication Date: 2018
$20.00

This benchmarking study involved both the application of biocides to reduce biofilm formation on clean carbon steel and the application of biocide to established biofilm.
Picture for High Concentration Biocide Treatment of an Oil Pipeline
Available for download

51318-11616-High Concentration Biocide Treatment of an Oil Pipeline

Product Number: 51318-11616-SG
Author: Zach Broussard / Timothy J Tidwell / Renato De Paula / Victor Keasler
Publication Date: 2018
$20.00

An oil transmission pipeline in the Eagle Ford area was being treated with 150ppm of active biocide based on a five percent water hold up but good control of the microbial population was not being maintained.

 
Picture for A New High Performance Biguanide Polyammonium-Based Blend For Control Of Microbiological Fouling In Oil And Gas Stimulation
Available for download

A New High Performance Biguanide Polyammonium-Based Blend For Control Of Microbiological Fouling In Oil And Gas Stimulation

Product Number: 51321-16556-SG
Author: Christy C. Wentworth, Ph.D./ Jeffrey F. Kramer, Ph.D.
Publication Date: 2021
$20.00
Picture for A Novel Method for the Enhanced Kill of Sulfate Reducing Microorganisms
Available for download

A Novel Method for the Enhanced Kill of Sulfate Reducing Microorganisms

Product Number: 51320-14412-SG
Author: Gary E. Jenneman
Publication Date: 2020
$20.00

Hydrogen sulfide gas produced by sulfate reducing microorganisms (SRM) creates significant challenges in the petroleum industry including corrosion concerns, product devaluation, and significant health risks. Biocides and inhibitors are often employed to control these detrimental activities. Recently, co-injection of a synergistic blend of biocides and the SRM inhibitor, nitrite, was proposed as an effective means to control biogenic sulfide production, however, the method only addressed inhibition of SRM activity and not kill. Inhibition can have the undesirable consequence of allowing SRM to resume full activity once the inhibitor is depleted, thus requiring the continuous input of expensive chemicals to maintain control. On the other hand, biocides are designed to reduce SRM concentrations thus reducing the need to add additional chemical until the SRM population re-establishes. Lab results, using an SRM field enrichment, demonstrated that the sequential injection of nitrite inhibitor followed by glutaraldehyde led to an 8-log reduction in SRM while only a 2-log reduction when co-injecting these chemicals at equivalent concentrations. It is proposed that pretreatment with the inhibitor, nitrite, or other respiratory inhibitor, results in a reduction in cellular ATP of the SRM creating a sublethal stress response allowing for their enhanced kill upon subsequent biocide addition. 
Picture for A Novel Peptide at a Very Low Concentration Enhanced Biocide Treatment of Corrosive Biofilms
Available for download

A Novel Peptide at a Very Low Concentration Enhanced Biocide Treatment of Corrosive Biofilms

Product Number: 51317--8950-SG
ISBN: 8950 2017 CP
Author: Tingyue Gu
Publication Date: 2017
$20.00

A peptide (labeled as “Peptide A”) was used to enhance tetrakis hydroxymethyl phosphonium sulfate biocide to treat the corrosive sulfate reducing bacterium Desulfovibrio vulgaris and a tough field biofilm consortium on C1018 carbon steel coupons.
Picture for Assessment of Anticorrosion/Antifouling Performances of a Novel Hybrid Epoxy-Siliconized Coating
Available for download

Assessment of Anticorrosion/Antifouling Performances of a Novel Hybrid Epoxy-Siliconized Coating

Product Number: 51317--8906-SG
ISBN: 8906 2017 CP
Author: Rami Suleiman
Publication Date: 2017
$20.00

Protective polymeric coatings containing active biocides are an approach to address material loss due to corrosion and fouling of steel surfaces. Tests were done on a hybrid epoxy-siliconized coating was synthesized and embedded with biocides.
Picture for Asset Life Extension Through Deployment of Corrosion and Inspection Technologies: Corrosion Monitoring Vs. Condition Monitoring
Available for download

Asset Life Extension Through Deployment of Corrosion and Inspection Technologies: Corrosion Monitoring Vs. Condition Monitoring

Product Number: 51323-19279-SG
Author: Faisal M. Al-Mutahhar, Ibrahim A. Albrahim, Abdullah M. Alratoee, Rakan A. Al-Shebil, Ayman A. Alabdullatif, Ricardo S. Costa, Yousef A. Aldossary, Muntathir M. Al-Jumaah
Publication Date: 2023
$20.00

As facilities in the oil and gas industry age with time, corrosion mitigation and control become more important. Failure of processing equipment is likely to entail production loss, loss of containment, environmental impact, and/or human risk. Internal corrosion failures represent one of the major risks to process equipment and piping.
Picture for Biocide Evaluation And Optimization For PW Pipelines By Testing On System-Specific High-Risk Microorganism
Available for download

Biocide Evaluation And Optimization For PW Pipelines By Testing On System-Specific High-Risk Microorganism

Product Number: 51321-16664-SG
Author: Michael Lowe Jensen; Laura Tiano; Lone Tang; Tinna Staghoj Roesen; Rikke Markfoged
Publication Date: 2021
$20.00
Picture for Biocide Selection Score Card: A Numerical Approach to Product Selection
Available for download

Biocide Selection Score Card: A Numerical Approach to Product Selection

Product Number: MECC23-19919-SG
Author: Juan F. Hernández; Ridha H. Abbas; Saud A. Abudaly; Subhash Nair; Sreenivas KM
Publication Date: 2023
$20.00

Secondary oil production involves the injection of water into the reservoir, generally known as water flooding, to increase the reservoir pressure to its initial levels, to maximize the oil recovery out of the ground. The injected water flows through the formation to flush the oil from the formation into the production system. Injection systems are the portion of the field that is responsible for injecting the water into the formation. Source of water may be lake, river or sea water.
Biocide Storage Tank Internal Corrosion and A Mitigation Strategy – A Case Study
Available for download

Biocide Storage Tank Internal Corrosion And A Mitigation Strategy – A Case Study

Product Number: 51322-17906-SG
Author: Ayman A. Alabdullatif, Rakan A. Al-Shebil, Wakeel Ahmad
Publication Date: 2022
$20.00

Variability of operation and practices can lead to mechanical integrity issues of equipment. A similar case was observed when an external UT survey was conducted on a biocide storage tank that showed localized areas of metal loss in the tank wall. The tank was opened for inspection and extensive internal corrosion damage was observed mainly in the form of large isolated pits. Three potential corrosion mitigation options were evaluated: upgrading the tank material from coated carbon steel to 316 stainless steel, installing a non-metallic lining, or keeping using the coated carbon steel and changing the operation practices. Each mitigation option was evaluated based integrity, feasibility, and economic factors. It was found that keeping the coated carbon steel and adjusting the operation practices can ensure the integrity of the tank while lowering the required economical investment. As such, a new operation manual was issued for the biocide storage tanks that ensured that the corrosion inducing environments are avoided.
Picture for Biocide sustainability impacts Improve seawater pipeline integrity, HSE and groundwater withdrawal avoidance
Available for download

Biocide sustainability impacts Improve seawater pipeline integrity, HSE and groundwater withdrawal avoidance

Product Number: 51323-18991-SG
Author: Juan F. Hernandez, Ridha H. Abbas, Vinicius Giorgetti, Fahad N. Abeedi
Publication Date: 2023
$20.00



Uncontrolled microbial growth in oilfield systems leads to costly problems such as fouling, plugging,
corrosion and souring. It also directly impacts the safe operation, economic performance and
environmental compliance in all areas of production, transportation, refining and distribution. To reduce
the damaging effect of microbial growth; the oil industry typically uses a variety of toxic organic and
inorganic chemicals (biocides) to treat affected systems
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support