AMPP Store - Products tagged with 'marine'

Available for download

Avoiding Corrosion in Desalination Plants (e-book)

Product Number: 37647-e

ISBN: 978-1-57590-390-3

Author: Roger Francis

Publication Date: 2019

$147.00

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants tells the reader how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to MSF, MED, and SWRO desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACE e-book

Available for download

Cathodic Protection on Steel Reinforced Concrete Marine Structures

Product Number: 51317--9219-SG

ISBN: 9219 2017 CP

Author: Douglas Leng

Publication Date: 2017

$20.00

The use of cathodic protection has become the preferred method for mitigating corrosion of steel reinforcement in concrete. A wide variety of both impressed current and sacrificial systems have been effectively used to control the effects of corrosion.

Available for download

Corrosion Engineer's Reference Guide - Fourth Edition

Product Number: 37608-pdf

ISBN: 978-1-57590-450-4

Author: Robert Baboian

Publication Date: 2016

$170.00

MUST HAVE CLASSIC: The objective of the NACE Corrosion Engineer's Reference Book, published in 2016, is to provide scientists, engineers, technologists, and students with useful and important information and data on corrosion investigation and control.

This handbook starts out with a comprehensive glossary that includes standard terminology and acronyms related to corrosion. It also contains more than 325 tables, graphs, and charts.

2016 NACE, 570 pages

Available for download

Corrosion: The Destructive Stowaway on Marine Vessels Determining the Cost-Benefit of Protecting Marine Coating Systems

Product Number: 41215-930-SG

Author: E. Bud Senkowski

Publication Date: 2015

$20.00

Marine coating systems installed aboard commercial and military vessels are exposed to extremely aggressive environmental conditions during maritime operation. A key element in prolonging the useful life of any ship, both commercial and military, lies in the selection and installation of cost-effective corrosion control methods and materials at newbuild.

Available for download

Design and Implementation of an Offshore Remote Monitoring System for Corrosion, Coating and Cathodic Protection Performance

Product Number: 51323-19265-SG

Author: Andreas Junker Olesen, Lars Vendelbo Nielsen, Lisbeth Rischel Hilbert, Frank Fontenay

Publication Date: 2023

$20.00

Remote monitoring of corrosion and cathodic protection using various methods have matured for decades with the onshore pipeline industry. With increasing activity offshore, and the highly corrosive and inaccessible environment taken into consideration, it is only natural that remote monitoring technology will find its way into this field. Offshore structures of steel are protected against corrosion with protective coatings and/or cathodic protection.

Available for download

Determination of the Corrosion Rate of Thermally Spayed Aluminum (TSA) in Simulated Marine Service

Product Number: 51320-14650-SG

Author: Shiladitya Paul, Dave Harvey

Publication Date: 2020

$20.00

Operators desire extended life of offshore facilities, structures and components to improve affordability, and to increase their availability in later years of operation. Whilst maintenance and replacement of topside facilities is possible, critical to this objective is the design and construction of supporting infrastructure and facilities capable of withstanding splash and tidal zone corrosion for the lifetime of the structure with minimum maintenance.

Thermally sprayed aluminum (TSA) is increasingly applied in marine environments as a corrosion mitigation solution but few studies provide quantitative corrosion rate data, from which a lifetime of little or no maintenance can be predicted. A technology review was undertaken to establish current working practice and experience related to the mitigation of splash and tidal zone corrosion. A number of coating systems (thermally sprayed, organic paints and duplex combined thermal spray and paint), currently used in the splash and tidal zone of offshore structures, were identified. Thermal spray coatings with and without aluminum-silicone sealant were prepared and tested in alternate immersion using linear polarisation resistance (LPR) methods. The data were analysed and corrosion rates values were obtained.

Available for download

Epoxy/Silicone: The Ecological Evolution of Speed, Efficiency and Durability in High Performance Marine Coatings

Product Number: 41212-676-SG

Author: Duane Palmateer, Ian Germain, John Kilgour

Publication Date: 2012

$20.00

Success with the elite sailing world coincided with a renewed interest in the rest of the marine industry to find high performance, non-toxic coatings for commercial and recreational ship hulls. It begged the question of could the technology be applicable to shipping where clean hulls, fuel efficiency and durability are the primary performance requirements.

Available for download

Evaluation of Alloys for Marine Exhaust Scrubbers

Product Number: 51317--8972-SG

ISBN: 8972 2017 CP

Author: Brian DeForce

Publication Date: 2017

$20.00

Permissible level of sulfur emissions from ocean vessels have been reduced. Diesel exhaust scrubbers are one response. The scrubber environment requires corrosion resistant alloys. This study compares multiple alloys in several simulated scrubber environments.

Available for download

How Can Companies Go Greener? (-...Psst: Without Loosing Performance)

Product Number: 41213-734-SG

Author: Anders Braekke

Publication Date: 2013

$20.00

The Global coating market is having a lot of pressure from official bodies and customers to take the business into a green direction. A greener approach will create need for new products and specifications. Increased global trade will put further pressure on producer to serve similar qualities to all countries

Available for download

Implementation of Pulsed Laser Ablation Technology in Surface Preparation Processes

Product Number: 51324-20982-SG

Author: Matt Binsfield

Publication Date: 2024

$40.00

The transition of pulsed laser ablation (PLA) technology into the hands of maintainers within shipyards and the transportation industry requires an assessment of multiple factors. From the technical perspective relative to surface preparation and corrosion mitigation, it is essential to understand the impact of PLA energy into substrates and the resultant adhesion characteristics of subsequent coatings. Technical areas to be discussed include metallurgical properties, such as stress corrosion cracking, weldability, bulk properties, fatigue life, as well as adhesion. The effective application of laser ablation is of critical concern to preservation professionals, which requires an understanding of how the process works, the proper appearance of a laser ablated surface, whether that is a tightly adhered existing coating prepared for re-coating, or to expose some or all of the base metal substrate. Accordingly, both laser operators and inspectors need specific information and training to appropriately use the technology to meet preservation objectives and requirements. These needs will be addressed through a forthcoming AMPP Laser Ablation Standard, Technical Guide, and Visual Guide. Determining where to apply PLA based on extensive test data currently available, as well as understanding where future investigation is required, will be summarized.

Available for download

Intellisyn™ - A New Class Of Multifunctional Smart Particles For Advanced Corrosion Protection

Product Number: 51322-17959-SG

Author: Benjamin Pearman, Xuejun Zhang, Dillon Campbell, Victoria Scarborough, Stephen Dickey

Publication Date: 2022

$20.00

Left unprotected, metals corrode quickly which over time contributes to the loss of structural integrity and the failure of buildings, bridges, oil & gas platforms, airplanes, cars and many other metal assets, all of which pose a risk to human safety and the surrounding environment. In 2016, the National Association for Corrosion Engineers (NACE) – now known as AMPP – published a landmark study, well-known to those attending this conference, that estimated the direct cost of corrosion to the world economy as $2.5T per year, equivalent to 3.4% of the Gross World Product (1). In the United States, the annual cost of corrosion is estimated at 3.1% of gross domestic product (2), equivalent to $635B (2018). When including indirect costs, such as asset downtime, ship dry-docking and the impact of bridge collapses, the cost of corrosion is estimated at twice that amount.

Available for download

Modernizing Shipbuilding with Blast and Paint Facilities: General Dynamics NASSCO redesigned its shipyard and operations to become a US leader in shipbuilding.

Product Number: 41213-796-SG

Author: Katie Urbas

Publication Date: 2013

$20.00

General Dynamics NASSCO proved that by modernizing its facilities and changing its operations it could build ships similarly to the industry leaders in Asia.

Products tagged with 'marine'

Association for Materials Protection and Performance