Menu
Search
Filters
Close
Menu

Avoiding Corrosion in Desalination Plants (e-book)

  • /
  • Avoiding Corrosion in Desalination Plants (e-book)
Avoiding Corrosion in Desalination Plants (e-book)
Available for download

Over the past decade, the author, Roger Francis, has looked at some very expensive corrosion failures in desalination plants. Avoiding Corrosion in Desalination Plants tells the reader how to avoid existing corrosion problems and how to avoid them in new builds.

This book looks at corrosion problems specific to MSF, MED, and SWRO desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACE e-book

 

Product Number: 37647-e
ISBN: 978-1-57590-390-3
Author: Roger Francis
Publication Date: 2019
$110.25
$147.00
$147.00

The world’s population is steadily increasing and with it is an increasing demand for water—for both drinking and irrigation. In many areas of the world, particularly in warmer climates, there are limited sources from rivers and wells, so desalination is being increasingly used to produce water to satisfy both requirements. Although desalination is sometimes carried out on brackish waters and highly saline well waters, most desalination plants generate fresh water from seawater.

There are three main processes used in desalination plants, the oldest of which is multistage flash (MSF), where the water is essentially boiled at low pressure and the steam that flashes off is condensed for drinking water. The second process is multiple-effect distillation (MED), in which low-pressure steam is used to force evaporation of seawater and the vapor is then condensed for drinking water. Although actual MSF and MED plants (large-scale) are land based, small-scale units have been fitted to large ships, such as cruise liners, to generate fresh water. 

The third process is seawater reverse osmosis (SWRO), where chloride is selectively removed from water by forcing it at high pressure through a special membrane. This method involves no heat transfer but requires enough electricity to power the high-pressure pumps that are required. All three of these methods have advantages and disadvantages.

This book looks at corrosion problems specific to MSF, MED, and SWRO desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACEe-book

The world’s population is steadily increasing and with it is an increasing demand for water—for both drinking and irrigation. In many areas of the world, particularly in warmer climates, there are limited sources from rivers and wells, so desalination is being increasingly used to produce water to satisfy both requirements. Although desalination is sometimes carried out on brackish waters and highly saline well waters, most desalination plants generate fresh water from seawater.

There are three main processes used in desalination plants, the oldest of which is multistage flash (MSF), where the water is essentially boiled at low pressure and the steam that flashes off is condensed for drinking water. The second process is multiple-effect distillation (MED), in which low-pressure steam is used to force evaporation of seawater and the vapor is then condensed for drinking water. Although actual MSF and MED plants (large-scale) are land based, small-scale units have been fitted to large ships, such as cruise liners, to generate fresh water. 

The third process is seawater reverse osmosis (SWRO), where chloride is selectively removed from water by forcing it at high pressure through a special membrane. This method involves no heat transfer but requires enough electricity to power the high-pressure pumps that are required. All three of these methods have advantages and disadvantages.

This book looks at corrosion problems specific to MSF, MED, and SWRO desalination plants, describing their causes, some solutions, and the relative performance of various materials. It gives advice on procuring materials for desalination plants to avoid quality problems.

2019 NACEe-book

Product tags
Also Purchased
Picture of Corrosion and Materials Fundamentals for Engineers in Wastewater Treatment Plants & Collection Systems, 3rd Edition (E-book)
Available for download

Corrosion and Materials Fundamentals for Engineers in Wastewater Treatment Plants & Collection Systems, 3rd Edition (E-book)

Product Number: 37609-E
ISBN: 978-1-57590-327-9
Author: David C. Bennett and Robert A. (Randy) Nixon
Publication Date: 2016
$105.00

For engineers and maintenance personnel who design, operate, and maintain large, multi–stage wastewater treatment plants (WWTP) Basics of corrosion of metals and degradation of non–metals, including concrete, and how to mitigate them.  3rd edition 2016 NACE E-Book
Picture of Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines (E-book)
Available for download

Field Guide to Internal Corrosion Mitigation and Monitoring for Pipelines (E-book)

Product Number: 37610-E
ISBN: 978-1-57590-328-6
Author: Richard B. Eckert
Publication Date: 2016
$130.00

Managing internal corrosion on pipeline systems and processing, storage and distribution assets.  Strategies for applying this information. Threat assessment. Mitigation. Implementation. Monitoring. 2016 NACE E-Book
Picture for Corrosion and Its Control: An Introduction to The Subject, 2nd Edition (e-Book)
Available for download

Corrosion and Its Control: An Introduction to the Subject, Second Edition (e-Book)

Product Number: 37552-E
ISBN: 1877914711
Author: J.T.N. Atkinson and H. Van Droffelaar
Publication Date: 1995
$90.00

This NACE best-seller is based on the authors' course, The Corrosion & Protection of Metals.  This edition of this classic text is based on notes used by the authors for more than a decade in their course, The Corrosion and Protection of Metals. The authors emphasize the engineering aspects of corrosion and its control in ways that will be helpful to the practicing engineer. Topics covered include corrosion economics, detecting and monitoring corrosion, regulations, specifications, safety, and the selection and use of materials, with special emphasis on stainless steels.  1995 NACE E-BOOK 
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support