AMPP Store - Products tagged with 'crevice corrosion'

Available for download

51316-7361-Corrosion Behavior of Duplex Stainless Steel UNS 31803 in Artificial Geothermal Waters

Product Number: 51316-7361-SG

ISBN: 7361 2016 CP

Author: Ralph Baessler

Publication Date: 2016

$20.00

Due to the elevated temperatures and chemical composition of hydrothermal fluids, service conditions in geothermal facilities can be extreme in terms of corrosion. This evaluation of corrosion behavior of duplex steel S31803 (318LN, X2CrNiMoN22-5-3, 1.4462) was conducted by electrochemical measurements and exposure tests.

Available for download

51317--9747-Recent Failures of 2205 Duplex Stainless Steel in FGD Scrubbers - Could They Have Been Avoided?

Product Number: 51317--9747-SG

ISBN: 9747 2017 CP

Author: Bud Ross

Publication Date: 2017

$20.00

Over 5 years, 70 to 80 FGD scrubber units have exhibited corrosion problems. Many were after only a few months of service. This paper will provide an overview of readily available technical information in the published literature and past experience that could have been used to minimize corrosion problems in these FGD units.

Available for download

51318-11185-Case Studies of Amine Sweetening Corrosion Incidents

Product Number: 51318-11185-SG

Author: Eric Teletzke / James Daughtry

Publication Date: 2018

$20.00

Five case studies of corrosion related failures in alkanolamine acid gas removal systems including the following types of corrosion: Uniform, Pitting, Chloride Induced Crevice, Cavitation, and Microbiologically Induced Corrosion (MIC).

Available for download

51318-11557-Failure Analysis of Gas Separator Cooler Tube Leak during service after passing Inspection test duri

Product Number: 51318-11557-SG

Author: Mohamud M. Farah / Muazu Mohammed

Publication Date: 2018

$20.00

Investigation revealed an erroneous selection of Incoloy 800 material for the gas separator tube instead of Inconel 625 and Incoloy 825 which have shown excellent pitting corrosion resistance.

Available for download

51318-11559-New Design/Material Solution for Pipeline Chemicals and Permeation

Product Number: 51318-11559-SG

$20.00

Results of both laboratory testing and field evaluation will display the performance weaknesses of glass reinforced epoxy (GRE) gaskets. A newly developed technological solution for pipelines requiring isolation will be presented.

Available for download

A Comparison of the Pitting and Crevice Corrosion of Directional Drilling Alloys With Oilfield Production Alloys

Product Number: 51320-14432-SG

Author: Manuel Marya

Publication Date: 2020

$20.00

The pitting corrosion and crevice corrosion of oilfield production alloys (e.g., 13Cr/UNS S41000, 17-4PH/UNS S17400, 25Cr/UNS S32750, A286/UNS S66286, 718/UNS N07718) and proprietary austenitic stainless steels for directional drilling (PREN between ~20 to ~45) has been investigated. Specifically, series of electrochemical tests have been conducted to rank the alloys, establish simple correlations between electrochemical parameters, PRENmod, and 3-to-60-day immersion tests in 3.5% NaCl at ambient temperature. For all but one alloy, pitting was absent in stark contrast to crevices. Upon tracking populations and dimensional characteristics of crevices over time, trendlines comparing the susceptibility of the alloys towards crevice corrosion were established. Practical conclusions were reached, including the following: (1) 13Cr consistently developed crevices within days, (2) 17-4PH as well as all traditional directional drilling stainless steels developed crevices within one to five weeks, and, (3) neither 718, 25Cr, nor newer directional drilling alloys with both high nickel and high PRENmod showed any sign of crevices upon being tested up to 60 days. Through a variety of comparisons, this investigation also reveals useful technical directions for the development of new, economical, and fit-for-service Oil & Gas alloys for both production and drilling.

Available for download

Alloy UNS N08827: A New and Advanced Version of Alloy UNS N08825 With Better Corrosion and Hot Cracking Resistance

Product Number: 51321-16398-SG

Author: Julia Botinha; Bodo Gehrmann; Martin Wolf; Helena Alves

Publication Date: 2021

$20.00

Available for download

Applicability of 15%Cr and 17%Cr Martensite-Based Stainless Steel OCTG Materials for Seawater Injection Service

Product Number: 51321-16310-SG

Author: Yasuhide Ishiguro/Yusuke Mizuno/Takashi Koga/Yuichi Kamo/Tsuyoshi Yoneyama

Publication Date: 2021

$20.00

Available for download

Comparison of Pitting and Crevice Corrosion - The Effect of Alloying Elements

Product Number: 51317--8975-SG

ISBN: 8975 2017 CP

Author: Brian DeForce

Publication Date: 2017

$20.00

Corrosion resistance of stainless steels and nickel alloys is due to alloying elements. The most important elements are Cr, Mo, N and sometimes W. This paper compares the effect of these elements in pitting and crevice corrosion.

Available for download

Contribution Of Cathodic Reaction Inside Crevice On Propagation Of Crevice Corrosion Of 304L SS In Chloride Solution

Product Number: ED22-17321-SG

Author: Kazuki Yakata, Yutaka Watanabe, Yuichi Fukaya

Publication Date: 2022

$20.00

On March 2011 at Fukushima Daiichi NPS, seawater was injected into spent fuel pools just after the accident for emergency cooling. The temperature of the water in a pool raised up to 93 ℃, and the chloride ion concentration raised up to 1,944 ppm (maximum) after seawater injection. In this high temperature and high chloride ion concentration environment, localized corrosion including crevice corrosion may have occurred on components made of passive metals such as stainless steels. The environment is assumed to be susceptible to crevice corrosion for 304 SS based on laboratory experiments and the concept of ER, CREV. There is a low possibility of initiating localized corrosion after the water was purified and deoxygenated. However, it is not certain whether localized corrosion, once initiated and propagated under the severe condition, will repassivate after the bulk water is purified. It is necessary to examine the continuity of crevice corrosion propagation when the bulk water is purified and deaerated, which means the cathodic reactions outside the crevice will no longer contribute to the propagation of the corrosion.

Available for download

Corrosion of Stainless Steels and Titanium in Bromide-Containing Solutions

Product Number: 51312-01253-SG

ISBN: 01253 2012 CP

Author: Bahri Ozturk

Publication Date: 2012

$20.00

Experiments to determine the critical pitting temperature of several alloys in calcium bromide solutions using the ASTM G150 electrochemical critical pitting test procedures. Similar experiments were also conducted in solutions containing equal concentrations (by weight) of chlorides and bromide.

Available for download

Corrosion Properties Of UNS S83071, Super Duplex Stainless Steel With High Acid Corrosion Resistance

Product Number: 51322-17925-SG

Author: Oscar Öhlin, Daniel Gullberg

Publication Date: 2022

$20.00

Austenitic-ferritic stainless steels, commonly known as duplex stainless steels (DSSs), are a group of materials typically consisting of equal amounts austenite and ferrite. DSSs are well-known materials in chemical industry and are often a cost-effective alternative as they combine high mechanical strength and fatigue resistance with good corrosion properties. Contributing to the cost-effectiveness is the low nickel content compared to austenitic stainless steels. Advantages with DSSs are high chloride stress corrosion cracking resistance (SCC), where austenitic steels with moderate nickel content are inherently more sensitive. In combinations with carbon steel it can be a benefit to use DSSs since carbon steel and DSSs have matching thermal expansion.

Products tagged with 'crevice corrosion'

Association for Materials Protection and Performance