Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

A Comparison of the Pitting and Crevice Corrosion of Directional Drilling Alloys With Oilfield Production Alloys

Picture for A Comparison of the Pitting and Crevice Corrosion of Directional Drilling Alloys With Oilfield Production Alloys
Available for download

The pitting corrosion and crevice corrosion of oilfield production alloys (e.g., 13Cr/UNS S41000, 17-4PH/UNS S17400, 25Cr/UNS S32750, A286/UNS S66286, 718/UNS N07718) and proprietary austenitic stainless steels for directional drilling (PREN between ~20 to ~45) has been investigated. Specifically, series of electrochemical tests have been conducted to rank the alloys, establish simple correlations between electrochemical parameters, PRENmod, and 3-to-60-day immersion tests in 3.5% NaCl at ambient temperature. For all but one alloy, pitting was absent in stark contrast to crevices. Upon tracking populations and dimensional characteristics of crevices over time, trendlines comparing the susceptibility of the alloys towards crevice corrosion were established. Practical conclusions were reached, including the following: (1) 13Cr consistently developed crevices within days, (2) 17-4PH as well as all traditional directional drilling stainless steels developed crevices within one to five weeks, and, (3) neither 718, 25Cr, nor newer directional drilling alloys with both high nickel and high PRENmod showed any sign of crevices upon being tested up to 60 days. Through a variety of comparisons, this investigation also reveals useful technical directions for the development of new, economical, and fit-for-service Oil & Gas alloys for both production and drilling. 

Product Number: 51320-14432-SG
Author: Manuel Marya
Publication Date: 2020
$0.00
$20.00
$20.00
Product tags
Also Purchased
Picture for 04139 Corrosion Behavior of Carbon Steel, Low
Available for download

04139 Corrosion Behavior of Carbon Steel, Low Alloy Steel and CRA's in Partially Deaerated Sea Water and Commingled Produced Water

Product Number: 51300-04139-SG
ISBN: 04139 2004 CP
Author: Michael John Schofield / K.C. Waterton / Tim Evans
Publication Date: 2004
$20.00

A test programme was conducted to study corrosion behaviour of - 1. carbon and low alloy steels, 2. austenitic, martensitic and duplex stainless steels and 3. nickel-based Alloy 718 - in low oxygen content (20 & 200 ppb) seawater.

 

 
Picture for 11116 High Strength and Corrosion Resistant Superalloys for Oil & Gas
Available for download

11116 High Strength and Corrosion Resistant Superalloys for Oil & Gas

Product Number: 51300-11116-SG
ISBN: 11116 2011 CP
Author: Luca Foroni and Carlo Malara
Publication Date: 2011
$20.00
Picture for Comparison of Pitting and Crevice Corrosion - The Effect of Alloying Elements
Available for download

Comparison of Pitting and Crevice Corrosion - The Effect of Alloying Elements

Product Number: 51317--8975-SG
ISBN: 8975 2017 CP
Author: Brian DeForce
Publication Date: 2017
$20.00

Corrosion resistance of stainless steels and nickel alloys is due to alloying elements. The most important elements are Cr, Mo, N and sometimes W. This paper compares the effect of these elements in pitting and crevice corrosion.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support