AMPP Store - Oil and Gas Production

Available for download

51316-7322-Methodology for the comparative evaluation of batch biocide performance against microbial corrosion

Product Number: 51316-7322-SG

ISBN: 7322 2016 CP

Author: Dennis Enning

Publication Date: 2016

$20.00

This study describes a laboratory test system which was specifically developed to assess the ability of biocides to lower microbial corrosion rates. It was found that the common oilfield biocides THPS and glutaraldehyde, dosed at concentrations of 300 ppm for 4 hours weekly over 5 weeks, could reduce MIC rates from 109.7 mpy to as low as 4.3 mpy

Available for download

51316-7328-Comparing Environmental Resistance of UNS R55400 Tubulars to Other Oilfield Titanium Alloys

Product Number: 51316-7328-SG

ISBN: 7328 2016 CP

Author: Ronald Schutz

Publication Date: 2016

$20.00

This paper presents an expanded laboratory test database on critical corrosion modes for UNS R55400 pipe exposed to relevant oilfield production environments which include sour well fluid brines, a heavy chloride/bromide brine well completion fluid, injected methanol, organic acid- and HCl-based well acidizing solutions, and seawater.

Available for download

51317--9527-Application of Encapsulated Scale Inhibitors - Understanding the Field Success Factors

Product Number: 51317--9527-SG

ISBN: 9527 2017 CP

Author: Mike Jackson

Publication Date: 2017

$20.00

This product slowly dissolves for long term scale/corrosion protection. This paper describes the chemical management system that reviewed: statistical interpretation of the results, laboratory methodologies, software simulations to calculate (a) the amount of encapsulated materials (b) frequency of treatment, (c) the economic analysis.

Available for download

51317--9622-Laboratory Test to Evaluate Lean Duplex UNS S32101 and UNS S32304 Flexible Pipe Carcass at Sour Service

Product Number: 51317--9622-SG

ISBN: 9622 2017 CP

Author: Merlin Bandeira

Publication Date: 2017

$20.00

The aim of this test program is to provide technical data to support the replacement of austenitic flexible pipe carcass, at Campos Basin, by low cost materials with suitable mechanical properties and corrosion resistance when the field conditions turn too aggressive to carcass materials in operation.

Available for download

51317--9623-Are Drill Pipe Conventional Coatings Suitable for Subsea Early Production Risers?

Product Number: 51317--9623-SG

ISBN: 9623 2017 CP

Author: Rodrigo Barreto

Publication Date: 2017

$20.00

This paper presents failures of the internal coating of drill pipe riser (DPR) systems that operated for 8 months in extended well testing (EWT) in Brazilian pre-salt fields at 1900-m sea depth. After two different EWT operations, blisters were seen through the internal coating of tubes that had been in service.

Available for download

51317--9636-Optimizing Composition Fabrication and Inspection of Chromium Carbide Overlay (CCO) for Oil Sands

Product Number: 51317--9636-SG

ISBN: 9636 2017 CP

Author: Duane Serate

Publication Date: 2017

$20.00

Lab tests, assessments and technical studies/literature reviews were done concerning common commercial Chromium Carbide Overlay (CCO) products to understand the effects of overlay composition and welding parameters on underbead cracking, mechanical properties, and wear/abrasion resistance.

Available for download

51317--9637-Non-Metallic Liners for Dense Slurry (Oil Sands) Applications

Product Number: 51317--9637-SG

ISBN: 9637 2017 CP

Author: Duane Serate

Publication Date: 2017

$20.00

This paper summarizes the experimental findings, discusses the effects of a typical bitumen-water slurry solution on the wear performance of polyurethanes and neoprenes and proposes a mathematical relationship between Coriolis (low stress, low angle abrasion & scouring) wear to the relevant physical properties in the virgin state of polyurethanes and neoprenes.

Available for download

51317--9642-Ageing Subsea Pipelines External Corrosion Management

Product Number: 51317--9642-SG

ISBN: 9642 2017 CP

Author: James Britton

Publication Date: 2017

$20.00

This paper reviews strategy for handling of life extension on old (17,000 km >35 years old, 55,000 > 25 years old) pipelines from preliminary assessment, through repair execution and post repair surveillance. Useful tips for avoiding common pitfalls are also presented.

Available for download

51317--9655-The Effect of Hydrogen on Plain and Notched Test Specimens of PH Nickel Alloys

Product Number: 51317--9655-SG

ISBN: 9655 2017 CP

Author: Stephen McCoy

Publication Date: 2017

$20.00

This paper reviews previous work and shows laboratory results using different test techniques to demonstrate the influence of yield strength and microstructure on the resistance to Hydrogen Stress Cracking of precipitation hardenable Nickel alloys N07718, N09925, N07725, N09945 and N09946.

Available for download

51317-9658-Evaluation of Anti-fouling Surfaces for Prevention of Lead Sulfide Scaling in Single and Multiphase Conditions

Product Number: 51317-9658-SG

Author: William Keogh / Thibaut Charpentier Anne Neville /, Andrew O’Brien / Violette Eroini / John Helge Olsen / Frank Møller Nielsen

Publication Date: 2017

$20.00

Soured reservoirs contain hydrogen sulfide (H2S) that can prompt the formation of exotic sulfide scales, leading to fouling that negatively affects the production of oil and gas. The paper examines the mode of precipitation and deposition of lead sulfide (PbS) scale on anti-fouling surfaces for application in oilfield systems.

Available for download

51317--9718-SSC Resistance of a Double Quench and Tempered T-95 Casing in Extremely Sour and High Pressure Environment

Product Number: 51317--9718-SG

ISBN: 9718 2017 CP

Author: Weiji Huang

Publication Date: 2017

$20.00

In extremely sour reservoirs, H2S and CO2 concentrations have been observed to reach upwards of 45% and 20%, respectively. In addition, bottomhole conditions can experience extremely high pressure in excess of 10,000 psi.

Available for download

51317--9720-Remote Monitoring of the Mechanical Integrity of Oil Sands Facility High Wear Components

Product Number: 51317--9720-SG

ISBN: 9720 2017 CP

Author: Rob Leary

Publication Date: 2017

$20.00

This paper discusses the implementation of an on-line remote ultrasonic (UT) system at a SAGD (Steam Assisted Gravity Drainage) facility located within the Athabasca oil sands reserves in Northern Alberta.

Oil and Gas Production

Association for Materials Protection and Performance