Menu
Search
Filters
Close
Menu

New Experiences With Explosion Clad Alloys UNS N06058 And UNS N06059

Picture for New Experiences With Explosion Clad Alloys UNS N06058 And UNS N06059
Available for download

The alloys used as clad material for this study are members of the so-called “C-family”. It consists of Ni-Cr-Mo alloys, which are known for combining the corrosion resistance of Ni-Cr alloys in oxidizing media with corrosion resistance of Ni-Mo alloys in reducing media. As a result, these materials have proven to be extremely durable in a wide range of highly aggressive media. The development of these materials started in the 1930s with Alloy C. This alloy showed remarkable corrosion resistance in a wide spread of media, low sensitivity for pitting or crevice corrosion and virtual immunity to chloride induced stress corrosion cracking.

Product Number: 51322-17650-SG
Author: P. Hübner, H. Alves, O. Sarrat, R. Behrens, D. Niespodziany, J. König
Publication Date: 2022
Industries: Corrosion Monitoring and Control , Coatings and Linings , Coatings
$0.00
$20.00
$20.00

Prior work showed that the Ni-Cr-Mo alloys UNS N06058 and UNS N06059 can be reliably explosion clad to carbon steel and are fully compliant with ASME Code. Additionally, corrosion tests in hydrochloric and sulfuric acid, in “green death solution” and further mechanical tests according to SA 265 (Nickel and Nickel-Base Alloy-Clad Steel Plate) have been conducted.

To fabricate equipment such as pressure vessels, explosion cladding is followed by shell and head forming. If requested by the codes, a post weld heat treatment may also be mandatory. After this sequence, the clad bond zone layer has been investigated with respect to mechanical properties and corrosion resistance.

Therefore, best practices for explosive cladding and head forming were identified and evidence was provided that the explosive cladding process does not affect the above-mentioned properties of Ni-Cr-Mo materials. The effect of the post weld heat treatment on the corrosion properties in hydrochloric and sulfuric acid was also investigated and differences between alloy UNS N06058 and alloy UNS N06059 could be detected.

Prior work showed that the Ni-Cr-Mo alloys UNS N06058 and UNS N06059 can be reliably explosion clad to carbon steel and are fully compliant with ASME Code. Additionally, corrosion tests in hydrochloric and sulfuric acid, in “green death solution” and further mechanical tests according to SA 265 (Nickel and Nickel-Base Alloy-Clad Steel Plate) have been conducted.

To fabricate equipment such as pressure vessels, explosion cladding is followed by shell and head forming. If requested by the codes, a post weld heat treatment may also be mandatory. After this sequence, the clad bond zone layer has been investigated with respect to mechanical properties and corrosion resistance.

Therefore, best practices for explosive cladding and head forming were identified and evidence was provided that the explosive cladding process does not affect the above-mentioned properties of Ni-Cr-Mo materials. The effect of the post weld heat treatment on the corrosion properties in hydrochloric and sulfuric acid was also investigated and differences between alloy UNS N06058 and alloy UNS N06059 could be detected.

Product tags
Also Purchased
Picture for Effect of Heat Treatment on Nickel Alloy Clad Plates
Available for download

51315-5680-Effect of Heat Treatment on Nickel Alloy Clad Plates

Product Number: 51315-5680-SG
ISBN: 5680 2015 CP
Author: Larry Paul
Publication Date: 2015
$20.00
New Long Service Life Topcoats For Pad-Mounted Transformer Enclosures.
Available for download

New Long Service Life Topcoats For Pad-Mounted Transformer Enclosures.

Product Number: 51322-18088-SG
Author: Kurt Wood, Anna Johnson, Bruce Sylvester
Publication Date: 2022
$20.00

Typical service lifetimes for protective coating systems range from 10-50 years, depending on how extreme the service environment is, as well as on all the details of substrate preparation, coating composition, and coating application.4 While the primary consideration for specifiers of protective coating systems is the service life related to corrosion protection, there is often also a requirement of durability of decorative properties, e.g. color and gloss. This is true not only for monumental steel structures, but also for instance for industrial and offshore structures where “safety colors” are used. This segment therefore has many similarities to the “architectural coatings” segment (coatings for monumental buildings), where the substrates may be different, but where a multi-layer system approach is still used, and owners expect the durability of both the protective and decorative functions.  
Picture for Multitask Learning Framework For Screening Of Corrosion Inhibitors For Mild Steel
Available for download

Multitask Learning Framework For Screening Of Corrosion Inhibitors For Mild Steel

Product Number: 51322-17757-SG
Author: Abhishek Agarwal, Pradeep Rathore, Dharmendr Kumar, Sri Harsha Nistala, S Sanjana, Vinay Jain, Beena Rai
Publication Date: 2022
$20.00

Corrosion of metallic structures is a ubiquitous problem in industries such as power generation, oil and gas, pulp and paper, metals processing etc. which also results in significant financial losses. According to the National Association of Corrosion Engineers (NACE) International report, the global cost of corrosion was ~ 2.5 trillion USD in 2013 - close to 3.4 percent GDP of the entire world. The use of corrosion inhibitors is one of the most effective and economical ways to mitigate corrosion of metal and alloy components. Corrosion inhibitors are substances that are added in small quantities in corrosive media to protect metal and alloy components from corrosion.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support