Menu
Search
Filters
Close
Menu

51316-7307-Impact of Biocomponents in the Fuel and Heating Oil on the Compatibility of Sealing Materials

Picture for Impact of Biocomponents in the Fuel and Heating Oil on the Compatibility of Sealing Materials
Available for download

The objective of this research was to determine the resistance of frequently used sealing materials in fuels and heating oil with and without admixtures such as E10, diesel fuel with 5 % biodiesel, non-aged and 2 year aged B10 (heating oil with 10 % biodiesel), pure diesel, standard heating oil and premium grade fuel Super plus at 20 °C, 40 °C and 70 °C.

Product Number: 51316-7307-SG
ISBN: 7307 2016 CP
Author: Margit Weltschev
Publication Date: 2016
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

The objective of this research was to determine the resistance of frequently used sealing materials such as FKM, FVMQ, VMQ, EPDM, CR, CSM, IIR, PA, NBR and PUR in fuels and heating oil with and without admixtures of biogenic sources such as E10, diesel fuel with 5 % biodiesel, non-aged and 2 year aged B10 (heating oil with 10 % biodiesel), pure diesel, standard heating oil and premium grade fuel Super plus at 20 °C, 40 °C and 70 °C. Mass, tensile strength and breaking elongation of the test specimens were determined before and after the exposure for 84 days in the fuels. The visual examination of some elastomer test specimens clearly showed the great volume increase until break or partial dissolution. Shore hardness A and D (for PA) were determined before and after exposure of the test specimens in the biofuels for 42 days. There is not determined a threshold for the reduction in tensile properties and Shore hardness in the international standards. Therefore a threshold of 15 % was determined for the evaluation of the compatibility. In summary, it can be therefore stated that the chemical resistance of the fluoropolymers FKM and FVMQ in fuels and biofuels is the best one.

Key words: downloadable, sealing materials, compatibility, biofuels, tensile properties, Shore hardness

 

The objective of this research was to determine the resistance of frequently used sealing materials such as FKM, FVMQ, VMQ, EPDM, CR, CSM, IIR, PA, NBR and PUR in fuels and heating oil with and without admixtures of biogenic sources such as E10, diesel fuel with 5 % biodiesel, non-aged and 2 year aged B10 (heating oil with 10 % biodiesel), pure diesel, standard heating oil and premium grade fuel Super plus at 20 °C, 40 °C and 70 °C. Mass, tensile strength and breaking elongation of the test specimens were determined before and after the exposure for 84 days in the fuels. The visual examination of some elastomer test specimens clearly showed the great volume increase until break or partial dissolution. Shore hardness A and D (for PA) were determined before and after exposure of the test specimens in the biofuels for 42 days. There is not determined a threshold for the reduction in tensile properties and Shore hardness in the international standards. Therefore a threshold of 15 % was determined for the evaluation of the compatibility. In summary, it can be therefore stated that the chemical resistance of the fluoropolymers FKM and FVMQ in fuels and biofuels is the best one.

Key words: downloadable, sealing materials, compatibility, biofuels, tensile properties, Shore hardness

 

Product tags
Also Purchased
Picture for Effect of Iron Sulfide Deposits on Sour Corrosion of Carbon Steel
Available for download

51316-7313-Effect of Iron Sulfide Deposits on Sour Corrosion of Carbon Steel

Product Number: 51316-7313-SG
ISBN: 7313 2016 CP
Author: Jon Kvarekval
Publication Date: 2016
$20.00

The corrosive effects of iron monosulfide deposited on carbon steel surfaces were investigated in  autoclave experiments. The H2S and CO2 partial pressures were 1 to 20 bar.  Temperatures were 10-120 °C. The test solutions consisted of high-salinity brine and low-salinity condensed water. Typical duration was 14 days. Weight loss and localized corrosion data were obtained.
Picture for Effect of Elements Mo and W on Humidity Corrosion of Low Alloy Steels in H2S-Containing Environment
Available for download

51316-7319-Effect of Elements Mo and W on Humidity Corrosion of Low Alloy Steels in H2S-Containing Environment

Product Number: 51316-7319-SG
ISBN: 7319 2016 CP
Author: Wei Liu
Publication Date: 2016
$20.00

The effect of Tungsten (W) and Molybdenum (Mo) on the corrosion behavior of low alloy steels exposed to acid humidity corrosion environment containing O2, H2S, and CO2 was investigated using weight loss, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical measurements.
Picture for Development of Self-Healing Coatings using Encapsulated Linseed Oil and Tung Oil as Healing Agents
Available for download

51316-7310-Development of Self-Healing Coatings using Encapsulated Linseed Oil and Tung Oil as Healing Agents

Product Number: 51316-7310-SG
ISBN: 7310 2016 CP
Author: Karan Thanawala
Publication Date: 2016
$20.00

Encapsulation of Linseed Oil & Tung Oil in urea-formaldehyde shells was performed using in-situ polymerization technique.  Thin film self-healing coatings with uniform and quick self-healing ability were achieved with microcapsules at concentration of 3 wt%. Anti-corrosive performance was evaluated using immersion test & electrochemical impedance spectroscopy (EIS).
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support