Menu
Search
Filters
Close
Menu

Horizontal Directional Drilling In External Pipeline Coating Integrity

Picture for Horizontal Directional Drilling In External Pipeline Coating Integrity
Available for download

The purpose of the “Bore Test” is to know the external quality of the coating after the installation of the pipe section, as picture 1. NACE standard “TM-102-2002-SG”1a defines four kinds of coating quality such as: excellent, good, fair and poor. To know the final quality of coating with this procedure. It was used two different electrical tests. DC current test using minimum voltage drop method and, the 3 pole test which is called by the same manufacture of the Multifunction Ground Resistance tester.

Product Number: 51322-17785-SG
Author: Eric Pintueles
Publication Date: 2022
Industries: Cathodic Protection , Corrosion Monitoring and Control , Coatings
$0.00
$20.00
$20.00

External coating testing for pipeline directional drilling installations or informally “Bore Test”. It is a very much requested test in Alberta, Canada. The conditions of the installation are severe for the integrity of the external coating. So, a procedure has been developed after the involvement in several projects. This presents the synergies between field data and cathodic protection theories. Two different field tests are presented by using DC and AC power sources furthermore a theoretical calculation but with given field data. Also, it is introduced a specific theory how to get the resistance of the soil. As the results, pipe-to-earth resistance was similar for both field tests and consistent with the theoretical calculation given field resistivity data. Any Horizontal Directional Drilling external pipeline coating integrity evaluation has its own limitations. Such as, site conditions, backfill settle, aboveground survey techniques access, as well as suitable equipment. Bore tests are run in different conditions therefore it is important to understand the engineering theories for these field tests.

External coating testing for pipeline directional drilling installations or informally “Bore Test”. It is a very much requested test in Alberta, Canada. The conditions of the installation are severe for the integrity of the external coating. So, a procedure has been developed after the involvement in several projects. This presents the synergies between field data and cathodic protection theories. Two different field tests are presented by using DC and AC power sources furthermore a theoretical calculation but with given field data. Also, it is introduced a specific theory how to get the resistance of the soil. As the results, pipe-to-earth resistance was similar for both field tests and consistent with the theoretical calculation given field resistivity data. Any Horizontal Directional Drilling external pipeline coating integrity evaluation has its own limitations. Such as, site conditions, backfill settle, aboveground survey techniques access, as well as suitable equipment. Bore tests are run in different conditions therefore it is important to understand the engineering theories for these field tests.

Product tags
Also Purchased
Picture for Improved Cathodic Protection Current Distribution for Above Ground Storage Tank Bottoms Due to Low Resistivity Vapor Corrosion Inhibitor Use
Available for download

Improved Cathodic Protection Current Distribution for Above Ground Storage Tank Bottoms Due to Low Resistivity Vapor Corrosion Inhibitor Use

Product Number: 51322-17666-SG
Author: Sujay Math
Publication Date: 2022
$20.00

In this paper, the CP current distribution with changing resistivities and the area of influence required to meet effective CP criteria, is studied. The results indicate that the tank pad electrolyte resistivity plays a significant role in achieving uniform CP current distribution. The paper also explores the use of Vapor Corrosion Inhibitor (VCI) and its effect on electrolyte resistivity and the resulting CP current distribution.
Guidelines for the Collection of Reliable and Practicable ECDA Indirect Inspection Data
Available for download

Guidelines For The Collection Of Reliable And Practicable ECDA Indirect Inspection Data

Product Number: 51322-17978-SG
Author: Miqdaad Fatakdawala
Publication Date: 2022
$20.00

The External Corrosion Direct Assessment (ECDA) is formally listed as an acceptable integrity assessment method within Subpart O, Part 192 of the code of federal regulations regarding gas transmission pipeline integrity management2.  It is a 4 step continuous improvement process to identify and address locations where external corrosion activity has occurred, is occurring or may occur1. In the pre-assessment phase, a comprehensive right-of-way inspection is performed, and pipeline operability data is collected to verify the feasibility of conducting a full ECDA for the pipeline under evaluation. In the indirect inspection phase, the status of cathodic protection and pipeline coating is tested using methods such as Close Interval Potential Surveys (CIPS) and Direct Current Voltage Gradient (DCVG) surveys.
Picture for 51318-11274-Research on Current and Potential Distribution of Horizontal Directional Drilling Pipeline
Available for download

51318-11274-Research on Current and Potential Distribution of Horizontal Directional Drilling Pipeline

Product Number: 51318-11274-SG
Author: Xu Huatian / Zhang Lianjun / Bi Wuxi / Liu Zhenbin
Publication Date: 2018
$20.00

Laboratory and field experiment results show that the soil resistivity is the main influencing factor of the cathodic protection current distribution of horizontal directional drilling. This article also gives a test method for effectiveness of cathodic protection of HDD.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support