Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

Use GIVING24 at checkout to save 20% on eCourses and books (some exclusions apply)!

51314-4363-Effect of EDM Geometry and Machining Parameters on KISSC of Low Alloy Steels

Picture for Effect of EDM Geometry and Machining Parameters on KISSC of Low Alloy Steels
Available for download
Product Number: 51314-4363-SG
ISBN: 4363 2014 CP
Author: María José Cancio
Publication Date: 2014
$0.00
$20.00
$20.00
Actual NACE TM0177 standard allows the use of Electro Discharge Machined (EDM) and chevron specimens for evaluation of Sulfide Stress Cracking (SSC) resistance of Low Alloy Carbon Steels. A 0.3mm/0.01 inch thickness is defined for EDM slot without specifying tolerances and recommending a rounded or beveled for the slot end in order to avoid side-arm breakoff.SSC resistance expressed as KISSC relays on the fact that crack is not only initiated but also that crack growth initiation is equivalent and highly consistent for EDM and chevron specimens for all selected environments. It is the aim of this work to study how machining variables of EDM process affect KISSC of C110 tested at room temperature with 0.07 and 1 bar pressure of H2S. Finally KISSC obtained with EDM specimens is compared with the one obtained using chevron precracked and non-precracked specimens. 
Actual NACE TM0177 standard allows the use of Electro Discharge Machined (EDM) and chevron specimens for evaluation of Sulfide Stress Cracking (SSC) resistance of Low Alloy Carbon Steels. A 0.3mm/0.01 inch thickness is defined for EDM slot without specifying tolerances and recommending a rounded or beveled for the slot end in order to avoid side-arm breakoff.SSC resistance expressed as KISSC relays on the fact that crack is not only initiated but also that crack growth initiation is equivalent and highly consistent for EDM and chevron specimens for all selected environments. It is the aim of this work to study how machining variables of EDM process affect KISSC of C110 tested at room temperature with 0.07 and 1 bar pressure of H2S. Finally KISSC obtained with EDM specimens is compared with the one obtained using chevron precracked and non-precracked specimens. 
Product tags
Also Purchased
Picture for 9 % Ni Alloy Steel for H2S Service
Available for download

51314-4361-9 % Ni Alloy Steel for H2S Service

Product Number: 51314-4361-SG
ISBN: 4361 2014 CP
Author: Annelise Zeemann
Publication Date: 2014
$0.00
Picture for Validation of the activity coefficients for carbonates at various HPHT and TDS conditions
Available for download

51314-4360-Validation of the activity coefficients for carbonates at various HPHT and TDS conditions

Product Number: 51314-4360-SG
ISBN: 4360 2014 CP
Author: Paula Guraieb
Publication Date: 2014
$20.00
Picture for Corrosion Initiation and Propagation of Two Duplex Stainless Steels Embedded in Concrete
Available for download

51314-4359-Corrosion Initiation and Propagation of Two Duplex Stainless Steels Embedded in Concrete

Product Number: 51314-4359-SG
ISBN: 4359 2014 CP
Author: Francisco Presuel-Moreno
Publication Date: 2014
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support