Menu
Search
Filters
Close
Menu

51318-11015-Corrosion of 13Cr Steel at the Cement/Casing Interface in CO2/H2S Environments at 4 85 and 200 °C

Picture for Corrosion of 13Cr Steel at the Cement/Casing Interface in CO2/H2S Environments at 4 85 and 200 °C
Available for download

A study investigated corrosion at the cement/casing interface for 13Cr casing steel. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) found that corrosion increased with increasing temperature.

Product Number: 51318-11015-SG
Author: Justin Beck / Ruishu Feng / Derek M. Hall / Aysel Buyuksagis / Serguei N. Lvov / Margaret Ziomek-Moroz
Publication Date: 2018
Industry: Science of Corrosion
$0.00
$20.00
$20.00

A study was carried out to investigate corrosion at the cement/casing interface for 13Cr casing steel. Cement simulated pore solution (CSPS) was developed by exposing cement pieces to 5% NaCl at 100 °C and 10 MPa in equilibrium with CO2. Pore solution was extracted from the cement pieces using a die press. Chemical analysis of the pore solution extract was performed and used for preparing CSPS for 13Cr corrosion testing. Corrosion tests were performed in CSPS at equilibrium with CO2 or CO2+H2S at 10 MPa at 4, 85, and 200 °C. Corrosion rates were determined using linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and mass loss coupons. Addition of H2S at 4 °C increased the corrosion rate, while at 85 °C it slightly decreased the corrosion rate. Only a small effect from H2S addition was observed at 200 °C. Cyclic voltammetry (CV) results showed passivation/depassivation of 13Cr in CSPS at 4 and 85 °C, while a transition to active corrosion was observed at 200 °C. Surface analysis using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) found that both the coverage and complexity of the corrosion products formed increased dramatically with increasing temperature.

Key words: H2S corrosion; CO2 corrosion; Chromium steels; Corrosion rates; Corrosion products; Cold-climate conditions; High pressure high temperature.

A study was carried out to investigate corrosion at the cement/casing interface for 13Cr casing steel. Cement simulated pore solution (CSPS) was developed by exposing cement pieces to 5% NaCl at 100 °C and 10 MPa in equilibrium with CO2. Pore solution was extracted from the cement pieces using a die press. Chemical analysis of the pore solution extract was performed and used for preparing CSPS for 13Cr corrosion testing. Corrosion tests were performed in CSPS at equilibrium with CO2 or CO2+H2S at 10 MPa at 4, 85, and 200 °C. Corrosion rates were determined using linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and mass loss coupons. Addition of H2S at 4 °C increased the corrosion rate, while at 85 °C it slightly decreased the corrosion rate. Only a small effect from H2S addition was observed at 200 °C. Cyclic voltammetry (CV) results showed passivation/depassivation of 13Cr in CSPS at 4 and 85 °C, while a transition to active corrosion was observed at 200 °C. Surface analysis using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) found that both the coverage and complexity of the corrosion products formed increased dramatically with increasing temperature.

Key words: H2S corrosion; CO2 corrosion; Chromium steels; Corrosion rates; Corrosion products; Cold-climate conditions; High pressure high temperature.

Product tags
Also Purchased
Picture for Data Integration Techniques to Support Meaningful Visualization of Corrosion Data
Available for download

51318-11007-Data Integration Techniques to Support Meaningful Visualization of Corrosion Data

Product Number: 51318-11007-SG
Author: Joshua Greer
Publication Date: 2018
$20.00

Specifically, the paper examines the key first step in visualizing corrosion data: integrating different types of data from different sources into a single system by using spatial components within each dataset to correlate the information.
Picture for Impact of Wash Water Injection on Corrosion Control in a Gas Recovery Unit
Available for download

51318-11008-Impact of Wash Water Injection on Corrosion Control in a Gas Recovery Unit

Product Number: 51318-11008-SG
Author: Chloe Lins / Cesar Espinoza / Sudhakar Mahajanam / Bruce Copple / Joanna Folse / Gillian Sayegh / Melissa Meneses
Publication Date: 2018
$20.00

Continuous wash water injection in gas recovery units (GRU) is a best practice for corrosion control. The case study describes failures that occurred in the wash water injection system.
Picture for Coating System to Mitigate Against Hydrogen Cracking in Gas Dehydration Unit
Available for download

51318-11009-Coating System to Mitigate Against Hydrogen Cracking in Gas Dehydration Unit

Product Number: 51318-11009-SG
Author: Cesar Espinoza / Chloe Lins / Sudhakar Mahajanam / Ryan DuBois / Ajay Aripirala / Kate Williamson
Publication Date: 2018
$20.00

Volumetric Ultrasonic Testing (phased array) thickness measurements performed on the absorber column of a gas dehydration unit (GDU) found laminations and inclusions. The component could not continue in operation unless mitigating actions were taken.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support