Menu
Search
Filters
Close
Menu

Conference Papers

  • Home /
  • Conference Papers

NACE Conference Papers

Picture for category NACE Conference Papers

SSPC Conference Papers

Picture for category SSPC Conference Papers

AMPP Conference Papers

Picture for category AMPP Conference Papers

Online Conference Paper

Picture for category Online Conference Paper

Individual Conference Papers

Picture for category Individual Conference Papers
View as
Sort by
Display per page
Picture for Review of Mitigation of Carbonation-Induced Corrosion With UHPC
Available for download

Review of Mitigation of Carbonation-Induced Corrosion With UHPC

Product Number: 51323-18977-SG
Author: Kingsley Lau, Samanbar Permeh, Sepehr Faridmarandi, Atorod Azizinamini
Publication Date: 2023
$20.00


Recent occurrences of high visibility structural failures have spurred interest to revisit inspection and repair of aging reinforced concrete structures. Chloride-induced corrosion can cause premature damage of structures in coastal regions. Corrosion induced by carbonation of the concrete and the concrete pore water, on the other hand can occur in many other environments including structures in both wet and dry exposures. This type of corrosion can become increasingly relevant in residential buildings as housing structures age to where sufficient carbonation occurs at reinforcing steel depths.
Review of Techniques to Evaluate SCC Susceptibility of Carbon Steels Used in Construction of Hanford Nuclear Reservation Waste Tanks
Available for download

Review Of Techniques To Evaluate SCC Susceptibility Of Carbon Steels Used In Construction Of Nuclear Waste Tanks

Product Number: 51322-18062-SG
Author: B.C. Rollins, S. Chawla, J. Gerst, J.A. Beavers, J. Page, C. Girardot, S. Campbell, N. Sridhar
Publication Date: 2022
$20.00

The Hanford Nuclear Reservation contains radioactive and chemically hazardous wastes arising mostly from weapons production, beginning with World War II and continuing through the Cold War. The wastes are stored in 177 carbon steel underground storage tanks, of which 149 are single-shell tanks (SSTs) and the remaining are double-shell tanks (DSTs). The U.S. Department of Energy, Office of River Protection is responsible for retrieving the tank wastes, treating them in order to encapsulate them in glass logs, and then permanently closing the tanks and associated facilities.
Picture for Review Of The State Of The Art Of Siliceous Scale Management In Industrial Systems
Available for download

Review Of The State Of The Art Of Siliceous Scale Management In Industrial Systems

Product Number: 51322-17731-SG
Author: Peter G. Koutsoukos, Panagiota D. Natsi, Zahid Amjad
Publication Date: 2022
$20.00

Fouling of equipment surfaces by siliceous salts such as silica, metal silicates,
coprecipitated silica with mineral salts such as calcium carbonate, calcium sulfate, etc.,
is a serious challenge facing the technologists in the efficient operation of industrial
systems. Severe fouling at times results in premature expensive equipment replacement,
early shutdown, increase in operating pressure of pumps, and enhance the probability of
corrosion damage. In many cases, the removal of foulants leads to discontinuous
operation of the system, resulting in higher operating costs. In geothermal applications,
siliceous scale typically occurs when brine is cooled in the course of brine handling and
energy extraction.
Picture for Review of Volatile Corrosion Inhibitors Evaluation Methods and Development of Testing Protocols
Available for download

Review of Volatile Corrosion Inhibitors Evaluation Methods and Development of Testing Protocols

Product Number: 51319-13303-SG
Author: Marc Singer
Publication Date: 2019
$20.00

Top of the Line Corrosion (TLC) is now known to be the main mode of failure in incidents associated with a number of wet gas pipelines operated all over the world. TLC is nevertheless a relatively recent phenomenon in a sense that its existence was only acknowledged about 10 to 15 years ago. Several research activities have been carried out since then to identify the main corrosion mechanisms and to propose appropriate mitigation techniques. Among them the use of volatile corrosion inhibitors (VCI) seems very promising. However the industry now suffers from a lack of consistency in the TLC inhibition evaluation methods. This paper presents a comprehensive and critical review of the different experimental setups proposed in the literature for the evaluation of VCI performances highlighting benefits and drawbacks of each method. Building on this valuable experience an effort is then made to propose a state of the art testing protocol for the determination of corrosion inhibition efficiency and persistency of VCI for TLC applications.
Picture for Review on the Determination of Sulfate Ion Concentrations in Deficient Post-Tensioned Grouts
Available for download

Review on the Determination of Sulfate Ion Concentrations in Deficient Post-Tensioned Grouts

Product Number: 51321-16342-SG
Author: Rutambara Sonawane/Samanbar Permeh/Kingsley Lau/Ron Simmons/Matthew Duncan/
Publication Date: 2021
$20.00
Picture for Review on the Heat-Resistant Stainless Steel Alloys Used for the Steam Methane Reformer Outlet Syste
Available for download

Review on the Heat-Resistant Stainless Steel Alloys Used for the Steam Methane Reformer Outlet Systems

Product Number: 51317--9351-SG
ISBN: 9351 2017 CP
Author: Shankar Venkataraman
Publication Date: 2017
$20.00

Both cast (UNS N08151) and wrought (UNS N08810/N08811) metallurgies have been used for outlet components. The microstructural features responsible for material performance, the various microstructural alterations occurring in service are reviewed as are the impact on serviceability and on, repair weldability and examples of failures.

 
Picture for Review: Advance Of Well Integrity Management
Available for download

Review: Advance Of Well Integrity Management

Product Number: 51321-16907-SG
Author: David Ernesto Castellanos Barajas; Javier Alexander Suárez Barajas; Ludwing Alfonso López Carreño
Publication Date: 2021
$20.00
Picture for Revisiting Alloy K-500 with Improved Performance Limits for Short and Long-Term Subterranean Applications
Available for download

Revisiting Alloy K-500 with Improved Performance Limits for Short and Long-Term Subterranean Applications

Product Number: 51323-18787-SG
Author: Manuel Marya
Publication Date: 2023
$20.00

Alloy K-500 (UNS N05500) is concomitantly a centurial material and the very first precipitation-strengthened nickel-based alloy, then developed in the 1920s by the newly-formed International Nickel Company, or Inco. 
Derived from Monel 400 (UNS N04400) that was invented in 1901, Alloy K-500 shares many of the same corrosion and tribological characteristics.  Being a pioneer alloy with so-called “stain-less” characteristics, Alloy
K-500 also established itself as the first high-strength oilfield nickel alloy, having survived sour service conditions exceeding the capabilities of the low-alloy steels of the time. From early naval propeller shaft applications to
general cross-industrial uses, Alloy K-500 has always been considered a corrosion-resistant alloy, or CRA. For instance, it has been included in the NACE MR1075 document right from the first 1975 edition. 
Picture for Revisiting The Anodic Dissolution Of Pure Iron In Strong Acid: Replication Of Bockris’ Estimation Of Butler-Volmer
Available for download

Revisiting The Anodic Dissolution Of Pure Iron In Strong Acid: Replication Of Bockris’ Estimation Of Butler-Volmer

Product Number: 51322-17681-SG
Author: Mohiedin Bagheri Hariri, Bruce Brown, Srdjan Nesic
Publication Date: 2022
$20.00

Reviewing literature related to corrosion research brings to light the importance of understanding the mechanisms involved, and how this is essential to aid in development of mathematical models for corrosion prediction. The current research documents possible mechanisms for the dissolution of pure iron in strong acid in a potential range in the potential range of ±50 mV vs. OCP, providing explanations for corrosion engineers and researchers working with mild steel. Prediction of corrosion rate relies on the precise understanding of the anodic and cathodic processes at the metal surface in the potential range close to the OCP.
Picture for Revolutionizing Non-Metallic GRE Tubulars in Downhole Applications: First Deployment of Hybrid Coupler in a Geothermal Well: Case Study
Available for download

Revolutionizing Non-Metallic GRE Tubulars in Downhole Applications: First Deployment of Hybrid Coupler in a Geothermal Well: Case Study

Product Number: MECC23-20002-SG
Author: Ralph El-Mir; Ghassan Zein; Adil al Mahasna
Publication Date: 2023
$20.00

As the petroleum and energy industries relentlessly push boundaries to achieve operational efficiency and sustainability, the materials they utilize come under increasing analysis. Historically dominated by metallic components, downhole applications are witnessing a transformative shift towards non-metallic composite material such as Glass Reinforced Epoxy (GRE) tubulars. These non-metallic solutions guarantees enhanced durability, cost-effectiveness, and resistance to the corrosive environment.
Picture for Ripple Slow Strain Rate Test for SSC and SCC of Super 13Cr Martensitic Stainless Steel and 25Cr Super Duplex Stainless Steel Tubular Materials
Available for download

Ripple Slow Strain Rate Test for SSC and SCC of Super 13Cr Martensitic Stainless Steel and 25Cr Super Duplex Stainless Steel Tubular Materials

Product Number: 51324-20735-SG
Author: Chong Li
Publication Date: 2024
$40.00
Corrosion and environmental cracking tests are important for fitness-for-service (FFS) evaluation during the material selection and qualification process to ensure quality of tubular materials. Super 13Cr martensitic stainless steel and super duplex 25Cr stainless steel are commonly used as tubular materials in oil and gas production wells under corrosive environments containing CO2 and H2S. This study evaluated the sulfide stress cracking (SSC) behavior of super 13Cr martensitic stainless steel and stress corrosion cracking (SCC) behavior of 25Cr super duplex stainless steel by using ripple slow strain rate test (SSRT) or cyclic SSRT. Environmental conditions including temperature, H2S, pH and chloride concentrations were varied to develop a service envelope and/or a material performance quality control criterion. This paper also presents implementation of ripple SSRT testing methodology in author’s company best practices for 25Cr tubular material qualification.
Picture for Risk Based Approach to Corrosion Prevention and Control for US Army Acquisition
Available for download

Risk Based Approach to Corrosion Prevention and Control for US Army Acquisition

Product Number: 51323-18922-SG
Author: Sam Conner
Publication Date: 2023
$20.00

Army Regulation (AR) 11-42, Army Corrosion Prevention and Control Program, requires that program managers and engineers use a risk-based approach (RBA) to identify the corrosion susceptibility on critical components and the consequence to the overall system. Department of the Army Pamphlet (DA PAM) 11-42 provides an example of generic procedures for conducting a risk-based approach. The goal of this project was to develop a detailed, standardized process for conducting a risk-based approach during CPC planning.
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support