AMPP Store - Coatings and Linings

Available for download

SSPC-SP 10 /NACE No. 2-2006, Near-White Metal Blast Cleaning

Product Number: 21066-SG

Publication Date: 2006

$179.00

HISTORICAL DOCUMENT. Requirements for "Near-White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 10/NACE No. 2-2024, Near-White Metal Blast Cleaning

Product Number: SSPC-SP 10/NACE No. 2-2024

Publication Date: 2024

$109.00

This standard defines the process for preparing a carbon steel surface to the near-white metal degree of surface cleanliness using a dry abrasive blast method of cleaning. It is intended for use by coating or lining specifiers, applicators, inspectors, or others whose responsibility is to specify a standard degree of surface cleanliness for carbon steel surfaces to be achieved by dry abrasive blast cleaning. or to prepare or inspect carbon steel to conform to defined requirements.

The primary functions of blast cleaning before coating are

a) to remove material from the surface that can cause early failure of the coating, and

b) to obtain a suitable surface profile (roughness) to enhance the adhesion of the new coating system.

The six degrees of dry abrasive blast cleaning of carbon steel surfaces are:

Degree of Surface Cleanliness	Designation
White Metal Blast Cleaning	SSPC-SP5/NACE No. 1
Near-White Metal Blast Cleaning	SSPC-SP10/NACE No. 2
Commercial Blast Cleaning	SSPC-SP6/NACE No. 3
Industrial Blast Cleaning	SSPC-SP14/NACE No. 8
Brush-Off Blast Cleaning	SSPC-SP7/NACE No. 4
Thorough Spot and Sweep Blast Cleaning for Industrial Coating Maintenance	SSPC-SP18

Available for download

SSPC-SP 13/NACE No. 6-2003, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2003

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-SP 13/NACE No. 6-2024, Surface Preparation of Concrete

Product Number: SSPC-SP 13/NACE No. 6-2024

$109.00

This AMPP standard covers the preparation of concrete surfaces before the application of protective coating or lining systems. This standard should be used by specifiers, applicators, inspectors, and others who are responsible for defining a standard degree of cleanliness, strength, profile, and dryness of prepared concrete surfaces.

Available for download

SSPC-SP 14 (WAB)/NACE WAB-8-2015, “Industrial Wet Abrasive Blast Cleaning”

Product Number: 21400-SG

ISBN: 1-57590-325-3

Publication Date: 2015

$109.00

This standard, SSPC-SP 14 (WAB)/NACE WAB-8, defines the "Industrial" level of surface cleanliness for wet abrasive methods. Other levels in overview below.

Available for download

SSPC-SP 14/NACE No. 8-2006, Industrial Blast Cleaning

Product Number: 21088-SG

ISBN: 1-57590-077-7

$109.00

Requirements for "Industrial" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 16-2010, Brush-Off Blast Cleaning of Coated and Uncoated Galvanized Steel, Stainless Steels, and Non-Ferrous Metals

Product Number: SSPC-SP 16-2010

Publication Date: 2010

$179.00

HISTORICAL DOCUMENT. This standard covers surface preparation of coated or uncoated metal surfaces other than carbon steel prior to the application of a protective coating system. Surface preparation using this standard is used to uniformly roughen and clean the bare substrate and to roughen the surface of intact coatings on these metals prior to coating application. Substrates that may be prepared by this method include, but are not limited to, galvanized surfaces, stainless steel, copper, aluminum, and brass. For the purpose of this standard, the zinc metal layer of hot-dip galvanized steel is considered to be the substrate, rather than the underlying steel. This standard is not to be used for cleaning coated or uncoated carbon steel substrates.

Available for download

SSPC-SP 5 (WAB)/NACE WAB-1-2015, “White Metal Wet Abrasive Blast Cleaning”

Product Number: 21198-SG

ISBN: 1-57590-323-7

Publication Date: 2015

$109.00

This standard, SSPC-SP 5 (WAB)/NACE WAB-1, defines the "White Metal" level of surface cleanliness for wet abrasive methods. One of five wet abrasive (WAB) levels: (White Metal, Near-White Metal, Commercial, Industrial, Brush-Off)

Available for download

SSPC-SP 5/NACE No. 1-2006, White Metal Blast Cleaning

Product Number: 21065-SG

ISBN: 1-57590-107-2

Publication Date: 2006

$109.00

Requirements for "White Metal" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Available for download

SSPC-SP 6 (WAB)/NACE WAB-3-2015, “Commercial Wet Abrasive Blast Cleaning”

Product Number: 21199-SG

ISBN: 1-57590-324-5

Publication Date: 2015

$109.00

This standard, SSPC-SP 6 (WAB)/NACE WAB-3, defines the "Commercial" level of surface cleanliness for wet abrasive methods. One of five wet abrasive (WAB) levels: (White Metal, Near-White Metal, Commercial, Industrial, Brush-Off)

Available for download

SSPC-SP 7 (WAB)/NACE WAB-4-2015, “Brush-Off Wet Abrasive Blast Cleaning”

Product Number: 21401-SG

ISBN: 1-57590-326-1

Publication Date: 2015

$109.00

This standard, SSPC-SP 7 (WAB)/NACE WAB-4, defines the "Brush-Off" level of surface cleanliness for wet abrasive methods. One of five wet abrasive (WAB) levels: (White Metal, Near-White Metal, Commercial, Industrial, Brush-Off)

Available for download

SSPC-SP 7/NACE No. 4-2006, Brush-Off Blast Cleaning

Product Number: 21068-SG

ISBN: 1-57590-102-1

Publication Date: 2006

$109.00

Requirements for "Brush-Off" - one of five levels of cleanliness of steel surfaces achieved by blast cleaning with the use of abrasives. (White Metal, Near-White Metal, Commercial, Industrial, Brush Off)

Coatings and Linings

Association for Materials Protection and Performance