AMPP Store - Coatings and Linings

Available for download

SSPC-Guide 12-2016, Guide to Illumination of Industrial Coating Projects

Product Number: SSPC-Guide 12-2016

Publication Date: 2016

$179.00

HISTORICAL DOCUMENT.

Available for download

SSPC-Guide 18-2022, Specifier’s Guide for Determining Containment Class and Environmental Monitoring Strategies for Lead Paint Removal Projects

Product Number: SSPC-GUIDE 18-2022

Publication Date: 2022

$109.00

This Guide describes a six-step process to assist in determining the type of containment system and the level of environmental monitoring that should be specified on a project-specific basis when removing coatings that contain lead. The selection of the containment and monitoring strategies is based on an assessment of the type of paint removal method that will be used and the potential impact of the operations on the public, other workers in the area, and the environment. Note that local and state codes and regulations must be reviewed and take precedence to any guidance provided in this document.

The guidance provided in this document also applies to coatings containing other hazardous metals such as cadmium and chromium; however, the recommended analytical monitoring is often based on an analysis for lead. Paint chip sampling and testing for lead and other hazardous metals should be undertaken to properly characterize the paint being removed.

This Guide does not cover the selection of paint removal methods, or design of containment/ventilation systems.

Available for download

SSPC-Guide 22-2022, Use and Retention of Pre-Construction Primers on Steel In Shipbuilding

Product Number: SSPC-Guide 22-2022

Publication Date: 2022

$109.00

This guide provides the specifier and user with information regarding the use of pre-construction primers (PCPs) on structural steel in shipbuilding. It provides background on the reasons to use and retain PCPs, the types of PCPs and their application and inspection, and the secondary surface preparation processes that are used when PCPs are retained in the final, compatible primary coating system. While this document contains details specific to the shipbuilding industry, the technical concepts related to the application and retention of PCP may apply to other industrial applications.

Available for download

SSPC-PA 1-2024, Shop, Field, and Maintenance Coating of Metals

Product Number: SSPC-PA 1-2024

$109.00

This standard provides basic requirements for best practices for the application of industrial/marine protective coatings to coated or uncoated metallic substrates and is intended for use by both specifiers and contractors, either in its entirety or by referencing specific sections. It focuses on the coating application process and application-related items that are included as one element of the contractor’s work plan or process control procedures.

Available for download

SSPC-PA 15-2022, Material and Preparation Requirements for Steel Test Panels Used to Evaluate the Performance of Industrial Coatings

Product Number: SSPC-PA 15-2022

Publication Date: 2022

$109.00

This standard contains requirements for steel panels used to perform tests for evaluation of various performance characteristics of protective coatings applied to steel substrates. Panels meeting requirements of this standard may be used for tests including, but not limited to, natural and accelerated exposure in or out of the laboratory; tests to determine resistance to various chemicals, impact, and abrasion; and tests to characterize properties such as color, gloss, adhesion, and hardness. Requirements for steel composition, panel dimensions, surface preparation, ambient conditions for application and cure of coatings, and location and dimensions of scribes on coated panels are included.

Available for download

SSPC-PA 16-2012, Method for Evaluating Scribe Undercutting on Coated Steel Test Panels Following Corrosion Testing

Product Number: SSPC-PA 16-2012

Publication Date: 2012

$179.00

HISTORICAL DOCUMENT

Available for download

SSPC-PA 16-2022, Method for Evaluating Scribe Undercutting on Coated Steel Test Panels Following Corrosion Testing

Product Number: SSPC-PA 16-2022

Publication Date: 2022

$109.00

This standard allows the user to determine average and observed maximum undercutting values, as well as the frequency of the maximum undercutting on coated steel test panels scribed in accordance with Section 6 of ASTM D1654 using parallel, 100 mm (~4 in) scribes. The standard includes requirements for data collection, analysis, and reporting.

This standard is applicable for evaluation of most types of protective coatings for use on steel. This standard is not applicable to evaluation of thermal sprayed metals and ceramic coatings, hot-dip and electro-coated metal coatings, and tapes.

Available for download

SSPC-PA 2-2018 (French), Procedure for Determining Conformance to Dry Coating Thickness Requirements

Product Number: SSPC-PA 2-2018 French

Publication Date: 2018

$179.00

Document historique. Nouvelle publication-2022

Norme d’application de la peinture N° 2

Procédure pour déterminer la conformité aux exigences d’épaisseur des revêtements secs

La présente norme décrit une procédure permettant dedéterminerlaconformité,enatelierousurunchantier,àune plage spécifiée d’épaisseur de feuil sec (Dry Film Thickness [DFT]) de revêtement sur des substrats en métaux ferreux et non ferreux à l’aide de deux types de jauges d’épaisseur de revêtement non destructives (type I, magnétiques et type 2, électroniques) décrites dans la norme ASTM D7091.

Available for download

SSPC-PA 2-2022, Procedure for Determining Conformance to Dry Coating Thickness Requirements

Product Number: SSPC-PA 2-2022

Publication Date: 2022

$109.00

This standard describes a procedure for determining shop or field conformance to a specified coating dry film thickness (DFT) range on ferrous and non-ferrous metal substrates using two types of nondestructive coating thickness gages (Type 1, magnetic pull-off, and Type 2, electronic) described in ASTM D7091

Available for download

SSPC-Paint 43-2024, Direct-to-Metal Aliphatic Polyurea Coating, Performance-Based

Product Number: SSPC-Paint 43-2024

Publication Date: 2024

$109.00

This standard was originally developed to provide performance criteria for fast-drying aliphatic polyurea coatings that are applied in single-coat direct-to-metal applications with good color and gloss retention. These criteria include UV exposure, accelerated corrosion, and other physical properties such as adhesion and impact resistance. It is intended for specifiers and coating manufacturers to use as a reference when specifying or producing these coatings. A similar standard for aliphatic polyurea coatings in topcoat applications can be found in SSPC-Paint 39.

Available for download

SSPC-QP 5-2022. Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection Companies

Product Number: SSPC-QP 5-2022

Publication Date: 2022

$109.00

This standard describes a method for evaluating the qualifications of coating and lining inspection companies who perform quality control or quality assurance inspection of applied coatings and linings.

The purpose of this procedure is to determine whether a coating inspection company has a corporate organization that clearly defines the authority and responsibilities of positions typically required for operation of a Coating Inspection Company, employs qualified management and inspection personnel, has established and implemented a viable quality management system, and has knowledge of industry technical standards and inspection practices.

This standard is a part of the AMPP accreditation program for firms. Although the standard references certifications and qualifications for individuals, those certifications and qualifications are administered through separate programs.

Available for download

SSPC-SP 10 (WAB)/NACE No. 2 (WAB)-2015, “Near-White Metal Wet Abrasive Blast Cleaning”

Product Number: 21197-SG

Publication Date: 2015

$109.00

This standard, SSPC-SP 10 (WAB)/NACE WAB-2, defines the "Near-White Metal" level of surface cleanliness for wet abrasive methods. Other levels in overview below.

Coatings and Linings

Association for Materials Protection and Performance