Menu
Search
Filters
Close
Menu

Coatings

View as
Sort by
Display per page
New SSPC Commercial Coating Committee
Available for download

New SSPC Commercial Coating Committee

Product Number: 41212-717-SG
Author: Kenneth A. Trimber
Publication Date: 2012
$20.00

On October 4, 2011, SSPC held the inaugural meeting of a new committee developed to address commercial coatings and flooring issues. The committee is called, “C3 Commercial Coating Committee (Architectural, Commercial, Institutional).” The committee agreed to address five topic areas: field cleaning and painting, paint materials, flooring, thin film air/vapor barriers on Concrete Masonry Unit (CMU), and commercial contractor certification. Key concerns in each of the topic areas were identified which resulted in the following scopes and work activities.
New Technologies for Architectural Coatings
Available for download

New Technologies for Architectural Coatings

Product Number: 41207-328-SG
Author: John Edgar
Publication Date: 2007
$20.00

Imitation is the sincerest form of flattery! These days, imitating nature has produced some amazing discoveries. New coatings are being introduced with properties that come straight from Mother Nature and ad d a whole new dimension to materials.
Picture for New Thermal Management Raw Materials Platform Gives Flexibility to Develop Next Generation Thermal Insulation Coatings (TIC) with Improved Performance
Available for download

New Thermal Management Raw Materials Platform Gives Flexibility to Develop Next Generation Thermal Insulation Coatings (TIC) with Improved Performance

Product Number: 51324-20913-SG
Author: Gary Fisher
Publication Date: 2024
$40.00

Coating industry trends has driven increased use and interest to develop more efficient and durable thermal insulative coatings. The key areas for this expansion are to reduce corrosion under insulation, increase occupational safety and reduce energy loss. Key features of these water-based coatings are low thermal conductivity, high hydrophobicity and adhesion along with an emerging interest to have greater heat resistance and stability. This paper will introduce a new water-based silicone hybrid resin to accompany the two novel microporous composite granules; one with high thermal insulative efficiency and the other, a pure hydrophobic synthetic silica pearl shaped filler to optimize thermal insulation efficiency as well as offering mechanical stability and reduced cracking in these highly filled coatings. The new platform offers the formulator options to leverage all new technologies together or separately when a compatible binder is needed to increase thermal heat stability and flame-retardant performance. Coatings and formulating details will be highlighted with thermal degradation of binders, surface temperature comparison for “Safe Touch” coatings, thermal conductivity (Lambda - mW/mK), contact angle measurements along with fire retardance test and direct flame testing using various thermal insulation fillers.
New Vinyl Coating System for the Marine Industry
Available for download

New Vinyl Coating System for the Marine Industry

Product Number: 41209-480-SG
Author: Daniel Harrison
Publication Date: 2009
$20.00

Vinyl coatings technology was pioneered shortly after World War II to control the corrosion on steel dam gates along the Mississippi River. Previously, oil-based technology had resulted in paints that performed well on atmospheric exposed areas of the dams but failed quickly in the areas immersed in water. By the mid-1950s, their proven durability had made vinyl coatings the industry standard for marine applications. 
New Water-Based Fluoropolymer Resins for Ultra-Weatherable Coatings
Available for download

New Water-Based Fluoropolymer Resins for Ultra-Weatherable Coatings

Product Number: 41209-472-SG
Author: Winn Darden, Bob Parker, Naoko Sumi, Isao Kimura, Masakazu Ataku, Takashige Maekawa
Publication Date: 2009
$20.00

Fluoropolymer resins find widespread use as building blocks for ultra-weatherable coatings. Fluoroethylene vinyl ether (FEVE) resins were developed to overcome some of the problems associated with the application of standard fluoropolymer coatings. FEVE resins, which yield topcoats with expected lifetimes exceeding 60 years, can be cured at ambient temperatures for field application, or at elevated temperatures in the shop. In order to allow coating manufacturers to conform to government regulations on solvents, water-based FEVE resins were developed several years ago. 
Newly Developed Waterborne Phenalkamine for Corrosion Resistant Primers
Available for download

Newly Developed Waterborne Phenalkamine for Corrosion Resistant Primers

Product Number: 51217-083-SG
Author: Hong Xu, Fernanda Tavares, Donald C. Lawson III, Jing Hu, Anbu Natesh
Publication Date: 2017
$20.00

Cashew Nutshell Liquid (CNSL) is a non-edible, renewable biomaterial extracted from the honeycomb-like structure of the cashew nut. Its main component, cardanol, is produced by the decarboxylation of CNSL and it contains a highly hydrophobic aliphatic side chain. Cardanol is used in the synthesis of phenalkamines, which are widely used in marine, protective and industrial coatings applications. Historically, phenalkamines have been used in solvent systems, but recently, a new technology was developed that enables a very hydrophobic phenalkamine to be stably packaged in water. 
Next Generation Splash Zone Coating
Available for download

Next Generation Splash Zone Coating

Product Number: 41210-580-SG
Author: Daniel A. Zarate
Publication Date: 2010
$20.00

Two coatings were developed for the intended purpose of maintaining steel sheet pile at the waterfront. The new splash zone coatings are free of VOC’s and HAP’s thereby providing a more environmentally friendly alternative to the standard coal tar epoxy system. The new coatings are also more abrasion and impact resistant and applied at more than twice the thickness of coal tar epoxy. All of these factors add up to an anticipated service life of 3 to 4 times that of coal tar epoxy leading to reduced life cycle costs.
Picture for Next Step To Advanced Data Analysis With Pulsed Eddy Currents
Available for download

Next Step To Advanced Data Analysis With Pulsed Eddy Currents

Product Number: 51322-17568-SG
Author: Donald Picard, Olivier Bellavance, Gabriel Cyr, Andréanne Potvin
Publication Date: 2022
$20.00

Pulsed Eddy Current (PEC) technology is a widely accepted inspection method now covered by several industry standards such as ISO(1) 20669, API(2) RP 583, and the new ASME(3) Section V (BPVC for Boiler and Pressure Vessel Code), article 21. PEC is a versatile inspection technology which provides an average remaining wall thickness through insulation and coatings. The technique can also be used to safely assess the minimum remaining ligament under corrosion scabs or blisters without surface preparation. PEC is resilient to liftoff variations and provides volumetric measurements of remaining material. It is capable of both detecting and assessing general corrosion on the outer surface of the pipes such as scabs and blisters, and detecting erosion or Flow Accelerated Corrosion (FAC) on the inner surface.
Picture for Nickel Based Alloy Casting Failure In Potash Production Mill
Available for download

Nickel Based Alloy Casting Failure In Potash Production Mill

Product Number: 51322-17528-SG
Author: Bernard Peterson, Alireza Kohandehghan, Brian Wilson
Publication Date: 2022
$20.00

Potash is mined from deep underground deposits left by ancient inland seas or extracted from saltwater bodies. The typical composition of potash is 40% potassium chloride (KCl), 55% sodium chloride (NaCl) and 5% clay. About 95% of potash is used for fertilizer in agriculture; the remaining 5% is used in commercial and industrial products such as soap, water softeners, de-icers, drilling muds etc.
No Place for Hipsters when the Substance behind a Pretty Façade is Required
Available for download

No Place for Hipsters when the Substance behind a Pretty Façade is Required

Product Number: 41213-775-SG
Author: Cynthia O’Malley
Publication Date: 2013
$20.00

In contrast to the Hipster projected or “posed” image based solely upon appearance in lieu of substance, a company’s brand-image projected by paints & coatings requires performance derived from consistently sound chemistry and manufacturing. The protective paints and coatings on the façade of commercial buildings are a significant aspect of the image associated with the owner organization. 
No Yelling: The Nine Secrets of Marine Corps Leadership You MUST Know To WIN In Business
Available for download

No Yelling: The Nine Secrets of Marine Corps Leadership You MUST Know To WIN In Business

Product Number: 41207-298-SG
Author: Wally Adamchik
Publication Date: 2007
$20.00

US Marines are known and respected the world over for their leadership ability. How do they do it? What do they know that enables them to be such successful leaders on active duty and then in the civilian sector? This paper, based on the book of the same name, reveals the nine essential behaviors that make up the foundation of leadership. 
Non-Abrasive Surface Preparation
Available for download

Non-Abrasive Surface Preparation

Product Number: 51217-078-SG
Author: David Watson
Publication Date: 2017
$20.00

While traditional cleaning solutions can be time consuming, costly and ineffective, dry ice blast cleaning provides a completely dry solution that cleans faster and more efficiently, while reducing downtime and supporting environmental initiatives. This presentation will discuss the basic concepts of dry ice cleaning. Participants will learn the benefits of the process, as well as, how it can benefit their production, improve quality, and support an environmentally responsible production environment. 
Categories
Industry
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support