Menu
Search
Filters
Close
Menu

Challenges Linked to Use of Hybrid Coatings in the Offshore Sector

Challenges Linked to Use of Hybrid Coatings in the Offshore Sector
Available for download

Polysiloxane (often referred to as ‘hydide coatings’) products have been one of the major technology platforms used in the European offshore sector mainly due ban on isocynate among several customers. The potential long-term performance of polysiloxanes coatings have also been a strong argument for this topcoat selection in NORSOK (501 – rev 5) systems. There have been several claim-situations with delamination in epically two-coat systems, but similar problems have also been seen on traditional NORSOK systems. 

Product Number: 41210-526-SG
Author: Anders Braekke
Publication Date: 2010
Industry: Coatings
$0.00
$20.00
$20.00

Polysiloxane (often referred to as ‘hydide coatings’) products have been one of the major technology platforms used in the European offshore sector mainly due ban on isocynate among several customers. The potential long-term performance of polysiloxanes coatings have also been a strong argument for this topcoat selection in NORSOK (501 – rev 5) systems. There have been several claim-situations with delamination in epically two-coat systems, but similar problems have also been seen on traditional NORSOK systems. The lack of adhesion and flexibility has been accepted as a major course for failure, but a multiple reasons for have been discussed as root-course for adhesion failure. Based on this insight new polysiloxane products have been developed with highest focus on long term flexibility and predictable adhesion. Hybrid coating with isocyanate/urethane curing mechanism have not been sold in offshore due to a zero tolerance regarding urethane / di-isococunates when heated.

Polysiloxane (often referred to as ‘hydide coatings’) products have been one of the major technology platforms used in the European offshore sector mainly due ban on isocynate among several customers. The potential long-term performance of polysiloxanes coatings have also been a strong argument for this topcoat selection in NORSOK (501 – rev 5) systems. There have been several claim-situations with delamination in epically two-coat systems, but similar problems have also been seen on traditional NORSOK systems. The lack of adhesion and flexibility has been accepted as a major course for failure, but a multiple reasons for have been discussed as root-course for adhesion failure. Based on this insight new polysiloxane products have been developed with highest focus on long term flexibility and predictable adhesion. Hybrid coating with isocyanate/urethane curing mechanism have not been sold in offshore due to a zero tolerance regarding urethane / di-isococunates when heated.

Product tags
Also Purchased
Chloride Removal: Using ‘Recyclable Encapsulated Abrasive Media
Available for download

Chloride Removal: Using ‘Recyclable Encapsulated Abrasive Media

Product Number: 41210-554-SG
Author: Michael Merritt
Publication Date: 2010
$20.00

This paper presents results of multiple test programs that have been performed to determine the effectiveness of recyclable encapsulated abrasive media to remove chlorides during surface preparation. Tests published in 2002 concluded that this technology consistently achieves significant reductions of chloride levels in comparison to those achieved with conventional abrasive blasting. 
Red Means Go, Polysiloxane Technology on the Roosevelt Island Bridge
Available for download

Red Means Go, Polysiloxane Technology on the Roosevelt Island Bridge

Product Number: 41211-632-SG
Author: Chris McMillan
Publication Date: 2011
$20.00

Coating technologies for bridges has not changed much since 1977. Available finish coat technologies were limited to alkyd, acrylic, or urethane-based chemistry. Performance of these chemistries has declined over the years due to cost reduction in paint to meet project pricing requirements. Bridge owners and engineers have had a limited selection of high-performance coatings to protect their assets. This is even more important with high profile structures where the finish coat needs to stand the test of time and limited maintenance funding has forced asset owners to extend time in between cosmetic maintenance
Picture for 10390 Design Validation of ICCP Systems for Offshore Wind Farms
Available for download

10390 Design Validation of ICCP Systems for Offshore Wind Farms

Product Number: 51300-10390-SG
ISBN: 10390 2010 CP
Author: Leslie Bortels, Jacques Parlongue, Joop de Leeuw and Bart Wessels
Publication Date: 2010
$20.00
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support