Server maintenance is scheduled for Saturday, December 21st between 6am-10am CST.

During that time, parts of our website will be affected until maintenance is completed. Thank you for your patience.

Menu
Search
Filters
Close
Menu

07260 Corrosion of Engineering Materials in Seawater, Freshwater and 3.5% NaCl Solution with Additions of Chlorine and Chlorite

Picture for 07260 Corrosion of Engineering Materials in Seawater, Freshwater and 3.5% NaCl Solution with Additions of Clorine and Clorite
Available for download

Laboratory tests of corrosion potentials of engineering materials under influence of additions of chlorine and chlorite were measured. Materials were an Al-alloy, 316L stainless steel, 6Mo stainless, 3 duplex stainless steels, CuNi, Ti & carbon steel.

Product Number: 51300-07260-SG
ISBN: 07260 2007 CP
Author: Torfinn Havn
Publication Date: 2007
Industry: Materials Selection and Design
$0.00
$20.00
$20.00

Sea water systems on many offshore platforms are treated with small amounts of chlorine to prevent marine growth inside piping and equipment. It is well known that small additions of chlorine increase the oxidation strength (corrosion potential) of Ti and stainless steels in sea water. Regarding Al, CuNi and carbon steel, it is difficult to find the effect of chlorine on these materials described in the literature. Therefore, during laboratory tests the corrosion potentials of engineering materials under influence of additions of chlorine and chlorite were measured. The investigated engineering materials were an Al-alloy, 316L stainless steel, 6Mo stainless steel, 3 grades of duplex stainless steels, CuNi, Ti and carbon steel. A systematic test program for these engineering materials was carried out with chlorine and chlorite rest levels of 0.5 ppm, 5 ppm, 50 ppm and 500 ppm.

Keywords: fresh water, seawater, 3.5% NaCl , engineering materials, chlorite, chlorine, electrochemical potentials.

 

 

Sea water systems on many offshore platforms are treated with small amounts of chlorine to prevent marine growth inside piping and equipment. It is well known that small additions of chlorine increase the oxidation strength (corrosion potential) of Ti and stainless steels in sea water. Regarding Al, CuNi and carbon steel, it is difficult to find the effect of chlorine on these materials described in the literature. Therefore, during laboratory tests the corrosion potentials of engineering materials under influence of additions of chlorine and chlorite were measured. The investigated engineering materials were an Al-alloy, 316L stainless steel, 6Mo stainless steel, 3 grades of duplex stainless steels, CuNi, Ti and carbon steel. A systematic test program for these engineering materials was carried out with chlorine and chlorite rest levels of 0.5 ppm, 5 ppm, 50 ppm and 500 ppm.

Keywords: fresh water, seawater, 3.5% NaCl , engineering materials, chlorite, chlorine, electrochemical potentials.

 

 

Product tags
Also Purchased
Picture for 98708 EFFECT OF CHLORINE ON COMMON MATERIALS
Available for download

98708 EFFECT OF CHLORINE ON COMMON MATERIALS IN FRESH WATER

Product Number: 51300-98708-SG
ISBN: 98708 1998 CP
Author: Arthur H. Tuthill, Richard E. Avery, Stephen Lamb, Gregory Kobrin
$20.00
Picture for 11351 The Corrosion of Superduplex Stainless Steel in Different Types of Seawater
Available for download

11351 The Corrosion of Superduplex Stainless Steel in Different Types of Seawater

Product Number: 51300-11351-SG
ISBN: 2011 11351 CP
Author: R Francis, G Byrne and G Warburton
Publication Date: 2011
$20.00

Superduplex stainless steels have been used in seawater systems since 1986 as castings and since 1990 as wrought product. The present paper describes some of the service environments commonly in use and the conditions that give rise to specific operating potentials. The limits of use under these conditions are described utilizing both laboratory and service experience.
Picture for 00588 STAINLESS STEELS IN CHLORINE DIOXIDE
Available for download

00588 STAINLESS STEELS IN CHLORINE DIOXIDE ENVIRONMENTS - PREDICTING THE POSSIBILITY OF PITTING

Product Number: 51300-00588-SG
ISBN: 00588 2000 CP
Author: Tero J. Hakkarainen
Publication Date: 2000
$20.00

Dependencies of the possibility of pitting on temperature and the chloride and sulfate contents of the environment were determined for stainless steels UNS S31726 and UNS S31254 using laboratory experiments with a strongly oxidizing chlorine dioxide environment.
Categories
Industry
Recently viewed
Popular tags
View all

Association for Materials Protection and Performance

© AMPP All Rights Reserved.
Membership Terms of Content Use
Contact Customer Support